linux/arch/arm/boot/compressed/sdhi-sh7372.c

96 lines
2.7 KiB
C

/*
* SuperH Mobile SDHI
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2010 Kuninori Morimoto
* Copyright (C) 2010 Simon Horman
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Parts inspired by u-boot
*/
#include <linux/io.h>
#include <mach/mmc.h>
#include <linux/mmc/boot.h>
#include <linux/mmc/tmio.h>
#include "sdhi-shmobile.h"
#define PORT179CR 0xe60520b3
#define PORT180CR 0xe60520b4
#define PORT181CR 0xe60520b5
#define PORT182CR 0xe60520b6
#define PORT183CR 0xe60520b7
#define PORT184CR 0xe60520b8
#define SMSTPCR3 0xe615013c
#define CR_INPUT_ENABLE 0x10
#define CR_FUNCTION1 0x01
#define SDHI1_BASE (void __iomem *)0xe6860000
#define SDHI_BASE SDHI1_BASE
/* SuperH Mobile SDHI loader
*
* loads the zImage from an SD card starting from block 0
* on physical partition 1
*
* The image must be start with a vrl4 header and
* the zImage must start at offset 512 of the image. That is,
* at block 1 (=byte 512) of physical partition 1
*
* Use the following line to write the vrl4 formated zImage
* to an SD card
* # dd if=vrl4.out of=/dev/sdx bs=512
*/
asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
{
int high_capacity;
mmc_init_progress();
mmc_update_progress(MMC_PROGRESS_ENTER);
/* Initialise SDHI1 */
/* PORT184CR: GPIO_FN_SDHICMD1 Control */
__raw_writeb(CR_FUNCTION1, PORT184CR);
/* PORT179CR: GPIO_FN_SDHICLK1 Control */
__raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
/* PORT181CR: GPIO_FN_SDHID1_3 Control */
__raw_writeb(CR_FUNCTION1, PORT183CR);
/* PORT182CR: GPIO_FN_SDHID1_2 Control */
__raw_writeb(CR_FUNCTION1, PORT182CR);
/* PORT183CR: GPIO_FN_SDHID1_1 Control */
__raw_writeb(CR_FUNCTION1, PORT181CR);
/* PORT180CR: GPIO_FN_SDHID1_0 Control */
__raw_writeb(CR_FUNCTION1, PORT180CR);
/* Enable clock to SDHI1 hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
/* setup SDHI hardware */
mmc_update_progress(MMC_PROGRESS_INIT);
high_capacity = sdhi_boot_init(SDHI_BASE);
if (high_capacity < 0)
goto err;
mmc_update_progress(MMC_PROGRESS_LOAD);
/* load kernel */
if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
0, /* Kernel is at block 1 */
(len + TMIO_BBS - 1) / TMIO_BBS, buf))
goto err;
/* Disable clock to SDHI1 hardware block */
__raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
return;
err:
for(;;);
}