linux/arch/arm/mach-sa1100/include/mach/irqs.h

93 lines
2.9 KiB
C

/*
* arch/arm/mach-sa1100/include/mach/irqs.h
*
* Copyright (C) 1996 Russell King
* Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
* Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
*
* 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
*/
#define IRQ_GPIO0 0
#define IRQ_GPIO1 1
#define IRQ_GPIO2 2
#define IRQ_GPIO3 3
#define IRQ_GPIO4 4
#define IRQ_GPIO5 5
#define IRQ_GPIO6 6
#define IRQ_GPIO7 7
#define IRQ_GPIO8 8
#define IRQ_GPIO9 9
#define IRQ_GPIO10 10
#define IRQ_GPIO11_27 11
#define IRQ_LCD 12 /* LCD controller */
#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
#define IRQ_DMA0 20 /* DMA controller channel 0 */
#define IRQ_DMA1 21 /* DMA controller channel 1 */
#define IRQ_DMA2 22 /* DMA controller channel 2 */
#define IRQ_DMA3 23 /* DMA controller channel 3 */
#define IRQ_DMA4 24 /* DMA controller channel 4 */
#define IRQ_DMA5 25 /* DMA controller channel 5 */
#define IRQ_OST0 26 /* OS Timer match 0 */
#define IRQ_OST1 27 /* OS Timer match 1 */
#define IRQ_OST2 28 /* OS Timer match 2 */
#define IRQ_OST3 29 /* OS Timer match 3 */
#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
#define IRQ_RTCAlrm 31 /* RTC Alarm */
#define IRQ_GPIO11 32
#define IRQ_GPIO12 33
#define IRQ_GPIO13 34
#define IRQ_GPIO14 35
#define IRQ_GPIO15 36
#define IRQ_GPIO16 37
#define IRQ_GPIO17 38
#define IRQ_GPIO18 39
#define IRQ_GPIO19 40
#define IRQ_GPIO20 41
#define IRQ_GPIO21 42
#define IRQ_GPIO22 43
#define IRQ_GPIO23 44
#define IRQ_GPIO24 45
#define IRQ_GPIO25 46
#define IRQ_GPIO26 47
#define IRQ_GPIO27 48
/*
* The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. If you need more, increase IRQ_BOARD_END, but keep it
* within sensible limits. IRQs 49 to 64 are available.
*/
#define IRQ_BOARD_START 49
#define IRQ_BOARD_END 65
/*
* Figure out the MAX IRQ number.
*
* If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
* If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
* Otherwise, we have the standard IRQs only.
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_BOARD_END + 55)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
/*
* Board specific IRQs. Define them here.
* Do not surround them with ifdefs.
*/
#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)