linux/drivers/thermal/intel_pch_thermal.c

290 lines
7.5 KiB
C

/* intel_pch_thermal.c - Intel PCH Thermal driver
*
* Copyright (c) 2015, Intel Corporation.
*
* Authors:
* Tushar Dave <tushar.n.dave@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/thermal.h>
/* Intel PCH thermal Device IDs */
#define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */
#define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */
/* Wildcat Point-LP PCH Thermal registers */
#define WPT_TEMP 0x0000 /* Temperature */
#define WPT_TSC 0x04 /* Thermal Sensor Control */
#define WPT_TSS 0x06 /* Thermal Sensor Status */
#define WPT_TSEL 0x08 /* Thermal Sensor Enable and Lock */
#define WPT_TSREL 0x0A /* Thermal Sensor Report Enable and Lock */
#define WPT_TSMIC 0x0C /* Thermal Sensor SMI Control */
#define WPT_CTT 0x0010 /* Catastrophic Trip Point */
#define WPT_TAHV 0x0014 /* Thermal Alert High Value */
#define WPT_TALV 0x0018 /* Thermal Alert Low Value */
#define WPT_TL 0x00000040 /* Throttle Value */
#define WPT_PHL 0x0060 /* PCH Hot Level */
#define WPT_PHLC 0x62 /* PHL Control */
#define WPT_TAS 0x80 /* Thermal Alert Status */
#define WPT_TSPIEN 0x82 /* PCI Interrupt Event Enables */
#define WPT_TSGPEN 0x84 /* General Purpose Event Enables */
/* Wildcat Point-LP PCH Thermal Register bit definitions */
#define WPT_TEMP_TSR 0x00ff /* Temp TS Reading */
#define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */
#define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */
#define WPT_TSS_GPES 0x08 /* GPE status */
#define WPT_TSEL_ETS 0x01 /* Enable TS */
#define WPT_TSEL_PLDB 0x80 /* TSEL Policy Lock-Down Bit */
#define WPT_TL_TOL 0x000001FF /* T0 Level */
#define WPT_TL_T1L 0x1ff00000 /* T1 Level */
#define WPT_TL_TTEN 0x20000000 /* TT Enable */
static char driver_name[] = "Intel PCH thermal driver";
struct pch_thermal_device {
void __iomem *hw_base;
const struct pch_dev_ops *ops;
struct pci_dev *pdev;
struct thermal_zone_device *tzd;
int crt_trip_id;
unsigned long crt_temp;
int hot_trip_id;
unsigned long hot_temp;
};
static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
{
u8 tsel;
u16 trip_temp;
*nr_trips = 0;
/* Check if BIOS has already enabled thermal sensor */
if (WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))
goto read_trips;
tsel = readb(ptd->hw_base + WPT_TSEL);
/*
* When TSEL's Policy Lock-Down bit is 1, TSEL become RO.
* If so, thermal sensor cannot enable. Bail out.
*/
if (tsel & WPT_TSEL_PLDB) {
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
return -ENODEV;
}
writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
if (!(WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))) {
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
return -ENODEV;
}
read_trips:
ptd->crt_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_CTT);
trip_temp &= 0x1FF;
if (trip_temp) {
/* Resolution of 1/2 degree C and an offset of -50C */
ptd->crt_temp = trip_temp * 1000 / 2 - 50000;
ptd->crt_trip_id = 0;
++(*nr_trips);
}
ptd->hot_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_PHL);
trip_temp &= 0x1FF;
if (trip_temp) {
/* Resolution of 1/2 degree C and an offset of -50C */
ptd->hot_temp = trip_temp * 1000 / 2 - 50000;
ptd->hot_trip_id = *nr_trips;
++(*nr_trips);
}
return 0;
}
static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp)
{
u8 wpt_temp;
wpt_temp = WPT_TEMP_TSR & readl(ptd->hw_base + WPT_TEMP);
/* Resolution of 1/2 degree C and an offset of -50C */
*temp = (wpt_temp * 1000 / 2 - 50000);
return 0;
}
struct pch_dev_ops {
int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips);
int (*get_temp)(struct pch_thermal_device *ptd, int *temp);
};
/* dev ops for Wildcat Point */
static const struct pch_dev_ops pch_dev_ops_wpt = {
.hw_init = pch_wpt_init,
.get_temp = pch_wpt_get_temp,
};
static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
{
struct pch_thermal_device *ptd = tzd->devdata;
return ptd->ops->get_temp(ptd, temp);
}
static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
enum thermal_trip_type *type)
{
struct pch_thermal_device *ptd = tzd->devdata;
if (ptd->crt_trip_id == trip)
*type = THERMAL_TRIP_CRITICAL;
else if (ptd->hot_trip_id == trip)
*type = THERMAL_TRIP_HOT;
else
return -EINVAL;
return 0;
}
static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
{
struct pch_thermal_device *ptd = tzd->devdata;
if (ptd->crt_trip_id == trip)
*temp = ptd->crt_temp;
else if (ptd->hot_trip_id == trip)
*temp = ptd->hot_temp;
else
return -EINVAL;
return 0;
}
static struct thermal_zone_device_ops tzd_ops = {
.get_temp = pch_thermal_get_temp,
.get_trip_type = pch_get_trip_type,
.get_trip_temp = pch_get_trip_temp,
};
static int intel_pch_thermal_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct pch_thermal_device *ptd;
int err;
int nr_trips;
char *dev_name;
ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
if (!ptd)
return -ENOMEM;
switch (pdev->device) {
case PCH_THERMAL_DID_WPT:
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_wildcat_point";
break;
case PCH_THERMAL_DID_SKL:
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_skylake";
break;
default:
dev_err(&pdev->dev, "unknown pch thermal device\n");
return -ENODEV;
}
pci_set_drvdata(pdev, ptd);
ptd->pdev = pdev;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device\n");
return err;
}
err = pci_request_regions(pdev, driver_name);
if (err) {
dev_err(&pdev->dev, "failed to request pci region\n");
goto error_disable;
}
ptd->hw_base = pci_ioremap_bar(pdev, 0);
if (!ptd->hw_base) {
err = -ENOMEM;
dev_err(&pdev->dev, "failed to map mem base\n");
goto error_release;
}
err = ptd->ops->hw_init(ptd, &nr_trips);
if (err)
goto error_cleanup;
ptd->tzd = thermal_zone_device_register(dev_name, nr_trips, 0, ptd,
&tzd_ops, NULL, 0, 0);
if (IS_ERR(ptd->tzd)) {
dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
dev_name);
err = PTR_ERR(ptd->tzd);
goto error_cleanup;
}
return 0;
error_cleanup:
iounmap(ptd->hw_base);
error_release:
pci_release_regions(pdev);
error_disable:
pci_disable_device(pdev);
dev_err(&pdev->dev, "pci device failed to probe\n");
return err;
}
static void intel_pch_thermal_remove(struct pci_dev *pdev)
{
struct pch_thermal_device *ptd = pci_get_drvdata(pdev);
thermal_zone_device_unregister(ptd->tzd);
iounmap(ptd->hw_base);
pci_set_drvdata(pdev, NULL);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
}
static struct pci_device_id intel_pch_thermal_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
static struct pci_driver intel_pch_thermal_driver = {
.name = "intel_pch_thermal",
.id_table = intel_pch_thermal_id,
.probe = intel_pch_thermal_probe,
.remove = intel_pch_thermal_remove,
};
module_pci_driver(intel_pch_thermal_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel PCH Thermal driver");