linux/arch/powerpc/platforms/83xx/mpc832x_rdb.c

180 lines
4.2 KiB
C

/*
* arch/powerpc/platforms/83xx/mpc832x_rdb.c
*
* Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved.
*
* Description:
* MPC832x RDB board specific routines.
* This file is based on mpc832x_mds.c and mpc8313_rdb.c
* Author: Michael Barkowski <michael.barkowski@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <linux/spi/spi.h>
#include <asm/of_platform.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include "mpc83xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
{
pr_debug("%s %d %d\n", __func__, cs, polarity);
par_io_data_set(3, 13, polarity);
}
static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
{
pr_debug("%s %d %d\n", __func__, cs, polarity);
par_io_data_set(3, 13, !polarity);
}
static struct spi_board_info mpc832x_spi_boardinfo = {
.bus_num = 0x4c0,
.chip_select = 0,
.max_speed_hz = 50000000,
/*
* XXX: This is spidev (spi in userspace) stub, should
* be replaced by "mmc_spi" when mmc_spi will hit mainline.
*/
.modalias = "spidev",
};
static int __init mpc832x_spi_init(void)
{
if (!machine_is(mpc832x_rdb))
return 0;
par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */
par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */
par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */
par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */
return fsl_spi_init(&mpc832x_spi_boardinfo, 1,
mpc83xx_spi_activate_cs,
mpc83xx_spi_deactivate_cs);
}
device_initcall(mpc832x_spi_init);
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc832x_rdb_setup_arch(void)
{
#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
#endif
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
}
#endif /* CONFIG_QUICC_ENGINE */
}
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
static int __init mpc832x_declare_of_platform_devices(void)
{
if (!machine_is(mpc832x_rdb))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
return 0;
}
device_initcall(mpc832x_declare_of_platform_devices);
void __init mpc832x_rdb_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc832x_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC832xRDB");
}
define_machine(mpc832x_rdb) {
.name = "MPC832x RDB",
.probe = mpc832x_rdb_probe,
.setup_arch = mpc832x_rdb_setup_arch,
.init_IRQ = mpc832x_rdb_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};