linux/arch/arm/mach-omap1/include/mach/debug-macro.S

103 lines
2.8 KiB
ArmAsm

/* arch/arm/mach-omap1/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/serial_reg.h>
#include <asm/memory.h>
#include <plat/serial.h>
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
.popsection
/*
* Note that this code won't work if the bootloader passes
* a wrong machine ID number in r1. To debug, just hardcode
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
.macro addruart, rx, tmp
/* Use omap_uart_phys/virt if already configured */
9: mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
ldrne \rx, =omap_uart_virt @ virtual base
ldr \rx, [\rx, #0]
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =OMAP_UART_INFO
ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
ldr \rx, [\rx, #0]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rx, #0 @ no port configured?
beq 11f @ if none, try to use UART1
cmp \rx, #OMAP1UART1
beq 11f @ configure OMAP1UART1
cmp \rx, #OMAP1UART2
beq 12f @ configure OMAP1UART2
cmp \rx, #OMAP1UART3
beq 13f @ configure OMAP2UART3
/* Configure the UART offset from the phys/virt base */
11: mov \rx, #0x00fb0000 @ OMAP1UART1
b 98f
12: mov \rx, #0x00fb0000 @ OMAP1UART1
orr \rx, \rx, #0x00000800 @ OMAP1UART2
b 98f
13: mov \rx, #0x00fb0000 @ OMAP1UART1
orr \rx, \rx, #0x00000800 @ OMAP1UART2
orr \rx, \rx, #0x00009000 @ OMAP1UART3
/* Store both phys and virt address for the uart */
98: add \rx, \rx, #0xff000000 @ phys base
mrc p15, 0, \tmp, c1, c0
tst \tmp, #1 @ MMU enabled?
ldreq \tmp, =__virt_to_phys(omap_uart_phys)
ldrne \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
sub \rx, \rx, #0xff000000 @ phys base
add \rx, \rx, #0xfe000000 @ virt base
ldreq \tmp, =__virt_to_phys(omap_uart_virt)
ldrne \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
b 9b
99:
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
beq 1002f
ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
1002:
.endm
.macro waituart,rd,rx
.endm