474 lines
12 KiB
C
474 lines
12 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/trizeps4.c
|
|
*
|
|
* Support for the Keith und Koep Trizeps4 Module Platform.
|
|
*
|
|
* Author: Jürgen Schindele
|
|
* Created: 20 02, 2006
|
|
* Copyright: Jürgen Schindele
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/trizeps4.h>
|
|
#include <asm/arch/audio.h>
|
|
#include <asm/arch/pxafb.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/irda.h>
|
|
#include <asm/arch/ohci.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/********************************************************************************************
|
|
* ONBOARD FLASH
|
|
********************************************************************************************/
|
|
static struct mtd_partition trizeps4_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
},{
|
|
.name = "Kernel",
|
|
.size = 0x00400000,
|
|
.offset = 0x00040000
|
|
},{
|
|
.name = "Filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = 0x00440000
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data trizeps4_flash_data[] = {
|
|
{
|
|
.map_name = "cfi_probe",
|
|
.parts = trizeps4_partitions,
|
|
.nr_parts = ARRAY_SIZE(trizeps4_partitions)
|
|
}
|
|
};
|
|
|
|
static struct resource flash_resource = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device flash_device = {
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &trizeps4_flash_data,
|
|
},
|
|
.resource = &flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/********************************************************************************************
|
|
* DAVICOM DM9000 Ethernet
|
|
********************************************************************************************/
|
|
static struct resource dm9000_resources[] = {
|
|
[0] = {
|
|
.start = TRIZEPS4_ETH_PHYS+0x300,
|
|
.end = TRIZEPS4_ETH_PHYS+0x400-1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = TRIZEPS4_ETH_PHYS+0x8300,
|
|
.end = TRIZEPS4_ETH_PHYS+0x8400-1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = TRIZEPS4_ETH_IRQ,
|
|
.end = TRIZEPS4_ETH_IRQ,
|
|
.flags = (IORESOURCE_IRQ | IRQT_RISING),
|
|
},
|
|
};
|
|
|
|
static struct platform_device dm9000_device = {
|
|
.name = "dm9000",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(dm9000_resources),
|
|
.resource = dm9000_resources,
|
|
};
|
|
|
|
/********************************************************************************************
|
|
* PXA270 serial ports
|
|
********************************************************************************************/
|
|
static struct plat_serial8250_port tri_serial_ports[] = {
|
|
#ifdef CONFIG_SERIAL_PXA
|
|
/* this uses the own PXA driver */
|
|
{
|
|
0,
|
|
},
|
|
#else
|
|
/* this uses the generic 8520 driver */
|
|
[0] = {
|
|
.membase = (void *)&FFUART,
|
|
.irq = IRQ_FFUART,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM32,
|
|
.regshift = 2,
|
|
.uartclk = (921600*16),
|
|
},
|
|
[1] = {
|
|
.membase = (void *)&BTUART,
|
|
.irq = IRQ_BTUART,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.iotype = UPIO_MEM32,
|
|
.regshift = 2,
|
|
.uartclk = (921600*16),
|
|
},
|
|
{
|
|
0,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct platform_device uart_devices = {
|
|
.name = "serial8250",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = tri_serial_ports,
|
|
},
|
|
.num_resources = 0,
|
|
.resource = NULL,
|
|
};
|
|
|
|
/********************************************************************************************
|
|
* PXA270 ac97 sound codec
|
|
********************************************************************************************/
|
|
static struct platform_device ac97_audio_device = {
|
|
.name = "pxa2xx-ac97",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device * trizeps4_devices[] __initdata = {
|
|
&flash_device,
|
|
&uart_devices,
|
|
&dm9000_device,
|
|
&ac97_audio_device,
|
|
};
|
|
|
|
#ifdef CONFIG_MACH_TRIZEPS4_CONXS
|
|
static short trizeps_conxs_bcr;
|
|
|
|
/* PCCARD power switching supports only 3,3V */
|
|
void board_pcmcia_power(int power)
|
|
{
|
|
if (power) {
|
|
/* switch power on, put in reset and enable buffers */
|
|
trizeps_conxs_bcr |= power;
|
|
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
|
|
trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
/* wait a little */
|
|
udelay(2000);
|
|
/* take reset away */
|
|
trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
udelay(2000);
|
|
} else {
|
|
/* put in reset */
|
|
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
udelay(1000);
|
|
/* switch power off */
|
|
trizeps_conxs_bcr &= ~(0xf);
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
|
|
}
|
|
pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
|
|
}
|
|
|
|
/* backlight power switching for LCD panel */
|
|
static void board_backlight_power(int on)
|
|
{
|
|
if (on) {
|
|
trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
|
|
} else {
|
|
trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
|
|
}
|
|
pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
}
|
|
|
|
/* Powersupply for MMC/SD cardslot */
|
|
static void board_mci_power(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data* p_d = dev->platform_data;
|
|
|
|
if (( 1 << vdd) & p_d->ocr_mask) {
|
|
pr_debug("%s: on\n", __FUNCTION__);
|
|
/* FIXME fill in values here */
|
|
} else {
|
|
pr_debug("%s: off\n", __FUNCTION__);
|
|
/* FIXME fill in values here */
|
|
}
|
|
}
|
|
|
|
static short trizeps_conxs_ircr;
|
|
|
|
/* Switch modes and Power for IRDA receiver */
|
|
static void board_irda_mode(struct device *dev, int mode)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
if (mode & IR_SIRMODE) {
|
|
/* Slow mode */
|
|
trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
|
|
} else if (mode & IR_FIRMODE) {
|
|
/* Fast mode */
|
|
trizeps_conxs_ircr |= ConXS_IRCR_MODE;
|
|
}
|
|
if (mode & IR_OFF) {
|
|
trizeps_conxs_ircr |= ConXS_IRCR_SD;
|
|
} else {
|
|
trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
|
|
}
|
|
/* FIXME write values to register */
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
#else
|
|
/* for other baseboards define dummies */
|
|
void board_pcmcia_power(int power) {;}
|
|
#define board_backlight_power NULL
|
|
#define board_mci_power NULL
|
|
#define board_irda_mode NULL
|
|
|
|
#endif /* CONFIG_MACH_TRIZEPS4_CONXS */
|
|
EXPORT_SYMBOL(board_pcmcia_power);
|
|
|
|
static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
|
|
{
|
|
int err;
|
|
/* setup GPIO for PXA27x MMC controller */
|
|
pxa_gpio_mode(GPIO32_MMCCLK_MD);
|
|
pxa_gpio_mode(GPIO112_MMCCMD_MD);
|
|
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
|
|
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
|
|
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
|
|
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
|
|
|
|
pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
|
|
|
|
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
|
|
IRQF_DISABLED | IRQF_TRIGGER_RISING,
|
|
"MMC card detect", data);
|
|
if (err) {
|
|
printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void trizeps4_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(TRIZEPS4_MMC_IRQ, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data trizeps4_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = trizeps4_mci_init,
|
|
.exit = trizeps4_mci_exit,
|
|
.setpower = board_mci_power,
|
|
};
|
|
|
|
static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
|
|
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
|
.transceiver_mode = board_irda_mode,
|
|
};
|
|
|
|
static int trizeps4_ohci_init(struct device *dev)
|
|
{
|
|
/* setup Port1 GPIO pin. */
|
|
pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
|
|
pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
|
|
|
|
/* Set the Power Control Polarity Low and Power Sense
|
|
Polarity Low to active low. */
|
|
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
|
|
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void trizeps4_ohci_exit(struct device *dev)
|
|
{
|
|
;
|
|
}
|
|
|
|
static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.init = trizeps4_ohci_init,
|
|
.exit = trizeps4_ohci_exit,
|
|
};
|
|
|
|
static struct map_desc trizeps4_io_desc[] __initdata = {
|
|
{ /* ConXS CFSR */
|
|
.virtual = TRIZEPS4_CFSR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS BCR */
|
|
.virtual = TRIZEPS4_BOCR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS IRCR */
|
|
.virtual = TRIZEPS4_IRCR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS DCR */
|
|
.virtual = TRIZEPS4_DICR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS UPSR */
|
|
.virtual = TRIZEPS4_UPSR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lcd __initdata = {
|
|
.pixclock = 78000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 8,
|
|
.hsync_len = 4,
|
|
.left_margin = 4,
|
|
.right_margin = 4,
|
|
.vsync_len = 2,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
.cmap_greyscale = 0,
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
.lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
|
|
.lccr3 = 0x0340ff02,
|
|
.pxafb_backlight_power = board_backlight_power,
|
|
};
|
|
|
|
static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
|
|
{
|
|
}
|
|
|
|
static void __init trizeps4_init(void)
|
|
{
|
|
platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
|
|
|
|
set_pxa_fb_info(&sharp_lcd);
|
|
|
|
pxa_set_mci_info(&trizeps4_mci_platform_data);
|
|
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
|
|
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
|
|
}
|
|
|
|
static void __init trizeps4_map_io(void)
|
|
{
|
|
pxa_map_io();
|
|
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
|
|
|
|
/* for DiskOnChip */
|
|
pxa_gpio_mode(GPIO15_nCS_1_MD);
|
|
|
|
/* for off-module PIC on ConXS board */
|
|
pxa_gpio_mode(GPIO_PIC | GPIO_IN);
|
|
|
|
/* UCB1400 irq */
|
|
pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
|
|
|
|
/* for DM9000 LAN */
|
|
pxa_gpio_mode(GPIO78_nCS_2_MD);
|
|
pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
|
|
|
|
/* for PCMCIA device */
|
|
pxa_gpio_mode(GPIO_PCD | GPIO_IN);
|
|
pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
|
|
|
|
/* for I2C adapter */
|
|
pxa_gpio_mode(GPIO117_I2CSCL_MD);
|
|
pxa_gpio_mode(GPIO118_I2CSDA_MD);
|
|
|
|
/* MMC_DET s.o. */
|
|
pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
|
|
|
|
/* whats that for ??? */
|
|
pxa_gpio_mode(GPIO79_nCS_3_MD);
|
|
|
|
pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
|
|
pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
|
|
|
|
#ifdef CONFIG_MACH_TRIZEPS4_CONXS
|
|
#ifdef CONFIG_IDE_PXA_CF
|
|
/* if boot direct from compact flash dont disable power */
|
|
trizeps_conxs_bcr = 0x0009;
|
|
#else
|
|
/* this is the reset value */
|
|
trizeps_conxs_bcr = 0x00A0;
|
|
#endif
|
|
ConXS_BCR = trizeps_conxs_bcr;
|
|
#endif
|
|
|
|
PWER = 0x00000002;
|
|
PFER = 0x00000000;
|
|
PRER = 0x00000002;
|
|
PGSR0 = 0x0158C000;
|
|
PGSR1 = 0x00FF0080;
|
|
PGSR2 = 0x0001C004;
|
|
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
|
|
PCFR |= PCFR_OPDE;
|
|
}
|
|
|
|
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
|
|
/* MAINTAINER("Jürgen Schindele") */
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
|
|
.fixup = trizeps4_fixup,
|
|
.init_machine = trizeps4_init,
|
|
.map_io = trizeps4_map_io,
|
|
.init_irq = pxa_init_irq,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|
|
|