ba2cf98249
sizeof(palette2fmt) / sizeof(u32) => ARRAY_SIZE(palette2fmt) Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2213 lines
64 KiB
C
2213 lines
64 KiB
C
/*
|
|
* stradis.c - stradis 4:2:2 mpeg decoder driver
|
|
*
|
|
* Stradis 4:2:2 MPEG-2 Decoder Driver
|
|
* Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/signal.h>
|
|
#include <asm/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <linux/sched.h>
|
|
#include <asm/types.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/videodev.h>
|
|
#include <media/v4l2-common.h>
|
|
|
|
#include "saa7146.h"
|
|
#include "saa7146reg.h"
|
|
#include "ibmmpeg2.h"
|
|
#include "saa7121.h"
|
|
#include "cs8420.h"
|
|
|
|
#define DEBUG(x) /* debug driver */
|
|
#undef IDEBUG /* debug irq handler */
|
|
#undef MDEBUG /* debug memory management */
|
|
|
|
#define SAA7146_MAX 6
|
|
|
|
static struct saa7146 saa7146s[SAA7146_MAX];
|
|
|
|
static int saa_num = 0; /* number of SAA7146s in use */
|
|
|
|
static int video_nr = -1;
|
|
module_param(video_nr, int, 0);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define nDebNormal 0x00480000
|
|
#define nDebNoInc 0x00480000
|
|
#define nDebVideo 0xd0480000
|
|
#define nDebAudio 0xd0400000
|
|
#define nDebDMA 0x02c80000
|
|
|
|
#define oDebNormal 0x13c80000
|
|
#define oDebNoInc 0x13c80000
|
|
#define oDebVideo 0xd1080000
|
|
#define oDebAudio 0xd1080000
|
|
#define oDebDMA 0x03080000
|
|
|
|
#define NewCard (saa->boardcfg[3])
|
|
#define ChipControl (saa->boardcfg[1])
|
|
#define NTSCFirstActive (saa->boardcfg[4])
|
|
#define PALFirstActive (saa->boardcfg[5])
|
|
#define NTSCLastActive (saa->boardcfg[54])
|
|
#define PALLastActive (saa->boardcfg[55])
|
|
#define Have2MB (saa->boardcfg[18] & 0x40)
|
|
#define HaveCS8420 (saa->boardcfg[18] & 0x04)
|
|
#define IBMMPEGCD20 (saa->boardcfg[18] & 0x20)
|
|
#define HaveCS3310 (saa->boardcfg[18] & 0x01)
|
|
#define CS3310MaxLvl ((saa->boardcfg[30] << 8) | saa->boardcfg[31])
|
|
#define HaveCS4341 (saa->boardcfg[40] == 2)
|
|
#define SDIType (saa->boardcfg[27])
|
|
#define CurrentMode (saa->boardcfg[2])
|
|
|
|
#define debNormal (NewCard ? nDebNormal : oDebNormal)
|
|
#define debNoInc (NewCard ? nDebNoInc : oDebNoInc)
|
|
#define debVideo (NewCard ? nDebVideo : oDebVideo)
|
|
#define debAudio (NewCard ? nDebAudio : oDebAudio)
|
|
#define debDMA (NewCard ? nDebDMA : oDebDMA)
|
|
|
|
#ifdef USE_RESCUE_EEPROM_SDM275
|
|
static unsigned char rescue_eeprom[64] = {
|
|
0x00, 0x01, 0x04, 0x13, 0x26, 0x0f, 0x10, 0x00, 0x00, 0x00, 0x43, 0x63,
|
|
0x22, 0x01, 0x29, 0x15, 0x73, 0x00, 0x1f, 'd', 'e', 'c', 'x', 'l',
|
|
'd', 'v', 'a', 0x02, 0x00, 0x01, 0x00, 0xcc, 0xa4, 0x63, 0x09, 0xe2,
|
|
0x10, 0x00, 0x0a, 0x00, 0x02, 0x02, 'd', 'e', 'c', 'x', 'l', 'a',
|
|
0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
#endif
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* Hardware I2C functions */
|
|
static void I2CWipe(struct saa7146 *saa)
|
|
{
|
|
int i;
|
|
/* set i2c to ~=100kHz, abort transfer, clear busy */
|
|
saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) |
|
|
SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
|
|
/* wait for i2c registers to be programmed */
|
|
for (i = 0; i < 1000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
|
|
schedule();
|
|
saawrite(0x600, SAA7146_I2C_STATUS);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) |
|
|
SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
|
|
/* wait for i2c registers to be programmed */
|
|
for (i = 0; i < 1000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
|
|
schedule();
|
|
saawrite(0x600, SAA7146_I2C_STATUS);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) |
|
|
SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
|
|
/* wait for i2c registers to be programmed */
|
|
for (i = 0; i < 1000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
|
|
schedule();
|
|
}
|
|
|
|
/* read I2C */
|
|
static int I2CRead(struct saa7146 *saa, unsigned char addr,
|
|
unsigned char subaddr, int dosub)
|
|
{
|
|
int i;
|
|
|
|
if (saaread(SAA7146_I2C_STATUS) & 0x3c)
|
|
I2CWipe(saa);
|
|
for (i = 0;
|
|
i < 1000 && (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY);
|
|
i++)
|
|
schedule();
|
|
if (i == 1000)
|
|
I2CWipe(saa);
|
|
if (dosub)
|
|
saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) |
|
|
((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER);
|
|
else
|
|
saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) |
|
|
0xf1, SAA7146_I2C_TRANSFER);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) |
|
|
SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
|
|
/* wait for i2c registers to be programmed */
|
|
for (i = 0; i < 1000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
|
|
schedule();
|
|
/* wait for valid data */
|
|
for (i = 0; i < 1000 &&
|
|
(saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
|
|
schedule();
|
|
if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR)
|
|
return -1;
|
|
if (i == 1000)
|
|
printk("i2c setup read timeout\n");
|
|
saawrite(0x41, SAA7146_I2C_TRANSFER);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) |
|
|
SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
|
|
/* wait for i2c registers to be programmed */
|
|
for (i = 0; i < 1000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
|
|
schedule();
|
|
/* wait for valid data */
|
|
for (i = 0; i < 1000 &&
|
|
(saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++)
|
|
schedule();
|
|
if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR)
|
|
return -1;
|
|
if (i == 1000)
|
|
printk("i2c read timeout\n");
|
|
return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff);
|
|
}
|
|
|
|
/* set both to write both bytes, reset it to write only b1 */
|
|
|
|
static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1,
|
|
unsigned char b2, int both)
|
|
{
|
|
int i;
|
|
u32 data;
|
|
|
|
if (saaread(SAA7146_I2C_STATUS) & 0x3c)
|
|
I2CWipe(saa);
|
|
for (i = 0; i < 1000 &&
|
|
(saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
|
|
schedule();
|
|
if (i == 1000)
|
|
I2CWipe(saa);
|
|
data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16);
|
|
if (both)
|
|
data |= ((b2 & 0xff) << 8) | 0xe5;
|
|
else
|
|
data |= 0xd1;
|
|
saawrite(data, SAA7146_I2C_TRANSFER);
|
|
saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C,
|
|
SAA7146_MC2);
|
|
return 0;
|
|
}
|
|
|
|
static void attach_inform(struct saa7146 *saa, int id)
|
|
{
|
|
int i;
|
|
|
|
DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr,
|
|
id));
|
|
if (id == 0xa0) { /* we have rev2 or later board, fill in info */
|
|
for (i = 0; i < 64; i++)
|
|
saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1);
|
|
#ifdef USE_RESCUE_EEPROM_SDM275
|
|
if (saa->boardcfg[0] != 0) {
|
|
printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE "
|
|
"BEEN IGNORED\n", saa->nr);
|
|
for (i = 0; i < 64; i++)
|
|
saa->boardcfg[i] = rescue_eeprom[i];
|
|
}
|
|
#endif
|
|
printk("stradis%d: config =", saa->nr);
|
|
for (i = 0; i < 51; i++) {
|
|
printk(" %02x", saa->boardcfg[i]);
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
static void I2CBusScan(struct saa7146 *saa)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 0xff; i += 2)
|
|
if ((I2CRead(saa, i, 0, 0)) >= 0)
|
|
attach_inform(saa, i);
|
|
}
|
|
|
|
static int debiwait_maxwait = 0;
|
|
|
|
static int wait_for_debi_done(struct saa7146 *saa)
|
|
{
|
|
int i;
|
|
|
|
/* wait for registers to be programmed */
|
|
for (i = 0; i < 100000 &&
|
|
!(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++)
|
|
saaread(SAA7146_MC2);
|
|
/* wait for transfer to complete */
|
|
for (i = 0; i < 500000 &&
|
|
(saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++)
|
|
saaread(SAA7146_MC2);
|
|
|
|
if (i > debiwait_maxwait)
|
|
printk("wait-for-debi-done maxwait: %d\n",
|
|
debiwait_maxwait = i);
|
|
|
|
if (i == 500000)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int debiwrite(struct saa7146 *saa, u32 config, int addr,
|
|
u32 val, int count)
|
|
{
|
|
u32 cmd;
|
|
if (count <= 0 || count > 32764)
|
|
return -1;
|
|
if (wait_for_debi_done(saa) < 0)
|
|
return -1;
|
|
saawrite(config, SAA7146_DEBI_CONFIG);
|
|
if (count <= 4) /* immediate transfer */
|
|
saawrite(val, SAA7146_DEBI_AD);
|
|
else /* block transfer */
|
|
saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
|
|
saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND);
|
|
saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
|
|
SAA7146_MC2);
|
|
return 0;
|
|
}
|
|
|
|
static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count)
|
|
{
|
|
u32 result = 0;
|
|
|
|
if (count > 32764 || count <= 0)
|
|
return 0;
|
|
if (wait_for_debi_done(saa) < 0)
|
|
return 0;
|
|
saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
|
|
saawrite((count << 17) | 0x10000 | (addr & 0xffff),
|
|
SAA7146_DEBI_COMMAND);
|
|
saawrite(config, SAA7146_DEBI_CONFIG);
|
|
saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
|
|
SAA7146_MC2);
|
|
if (count > 4) /* not an immediate transfer */
|
|
return count;
|
|
wait_for_debi_done(saa);
|
|
result = saaread(SAA7146_DEBI_AD);
|
|
if (count == 1)
|
|
result &= 0xff;
|
|
if (count == 2)
|
|
result &= 0xffff;
|
|
if (count == 3)
|
|
result &= 0xffffff;
|
|
return result;
|
|
}
|
|
|
|
static void do_irq_send_data(struct saa7146 *saa)
|
|
{
|
|
int split, audbytes, vidbytes;
|
|
|
|
saawrite(SAA7146_PSR_PIN1, SAA7146_IER);
|
|
/* if special feature mode in effect, disable audio sending */
|
|
if (saa->playmode != VID_PLAY_NORMAL)
|
|
saa->audtail = saa->audhead = 0;
|
|
if (saa->audhead <= saa->audtail)
|
|
audbytes = saa->audtail - saa->audhead;
|
|
else
|
|
audbytes = 65536 - (saa->audhead - saa->audtail);
|
|
if (saa->vidhead <= saa->vidtail)
|
|
vidbytes = saa->vidtail - saa->vidhead;
|
|
else
|
|
vidbytes = 524288 - (saa->vidhead - saa->vidtail);
|
|
if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) {
|
|
saawrite(0, SAA7146_IER);
|
|
return;
|
|
}
|
|
/* if at least 1 block audio waiting and audio fifo isn't full */
|
|
if (audbytes >= 2048 && (debiread(saa, debNormal, IBM_MP2_AUD_FIFO, 2)
|
|
& 0xff) < 60) {
|
|
if (saa->audhead > saa->audtail)
|
|
split = 65536 - saa->audhead;
|
|
else
|
|
split = 0;
|
|
audbytes = 2048;
|
|
if (split > 0 && split < 2048) {
|
|
memcpy(saa->dmadebi, saa->audbuf + saa->audhead, split);
|
|
saa->audhead = 0;
|
|
audbytes -= split;
|
|
} else
|
|
split = 0;
|
|
memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead,
|
|
audbytes);
|
|
saa->audhead += audbytes;
|
|
saa->audhead &= 0xffff;
|
|
debiwrite(saa, debAudio, (NewCard ? IBM_MP2_AUD_FIFO :
|
|
IBM_MP2_AUD_FIFOW), 0, 2048);
|
|
wake_up_interruptible(&saa->audq);
|
|
/* if at least 1 block video waiting and video fifo isn't full */
|
|
} else if (vidbytes >= 30720 && (debiread(saa, debNormal,
|
|
IBM_MP2_FIFO, 2)) < 16384) {
|
|
if (saa->vidhead > saa->vidtail)
|
|
split = 524288 - saa->vidhead;
|
|
else
|
|
split = 0;
|
|
vidbytes = 30720;
|
|
if (split > 0 && split < 30720) {
|
|
memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead, split);
|
|
saa->vidhead = 0;
|
|
vidbytes -= split;
|
|
} else
|
|
split = 0;
|
|
memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead,
|
|
vidbytes);
|
|
saa->vidhead += vidbytes;
|
|
saa->vidhead &= 0x7ffff;
|
|
debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO :
|
|
IBM_MP2_FIFOW), 0, 30720);
|
|
wake_up_interruptible(&saa->vidq);
|
|
}
|
|
saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER);
|
|
}
|
|
|
|
static void send_osd_data(struct saa7146 *saa)
|
|
{
|
|
int size = saa->osdtail - saa->osdhead;
|
|
if (size > 30720)
|
|
size = 30720;
|
|
/* ensure some multiple of 8 bytes is transferred */
|
|
size = 8 * ((size + 8) >> 3);
|
|
if (size) {
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR,
|
|
(saa->osdhead >> 3), 2);
|
|
memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size);
|
|
saa->osdhead += size;
|
|
/* block transfer of next 8 bytes to ~32k bytes */
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size);
|
|
}
|
|
if (saa->osdhead >= saa->osdtail) {
|
|
saa->osdhead = saa->osdtail = 0;
|
|
debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t saa7146_irq(int irq, void *dev_id)
|
|
{
|
|
struct saa7146 *saa = dev_id;
|
|
u32 stat, astat;
|
|
int count;
|
|
int handled = 0;
|
|
|
|
count = 0;
|
|
while (1) {
|
|
/* get/clear interrupt status bits */
|
|
stat = saaread(SAA7146_ISR);
|
|
astat = stat & saaread(SAA7146_IER);
|
|
if (!astat)
|
|
break;
|
|
handled = 1;
|
|
saawrite(astat, SAA7146_ISR);
|
|
if (astat & SAA7146_PSR_DEBI_S) {
|
|
do_irq_send_data(saa);
|
|
}
|
|
if (astat & SAA7146_PSR_PIN1) {
|
|
int istat;
|
|
/* the following read will trigger DEBI_S */
|
|
istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
|
|
if (istat & 1) {
|
|
saawrite(0, SAA7146_IER);
|
|
send_osd_data(saa);
|
|
saawrite(SAA7146_PSR_DEBI_S |
|
|
SAA7146_PSR_PIN1, SAA7146_IER);
|
|
}
|
|
if (istat & 0x20) { /* Video Start */
|
|
saa->vidinfo.frame_count++;
|
|
}
|
|
if (istat & 0x400) { /* Picture Start */
|
|
/* update temporal reference */
|
|
}
|
|
if (istat & 0x200) { /* Picture Resolution Change */
|
|
/* read new resolution */
|
|
}
|
|
if (istat & 0x100) { /* New User Data found */
|
|
/* read new user data */
|
|
}
|
|
if (istat & 0x1000) { /* new GOP/SMPTE */
|
|
/* read new SMPTE */
|
|
}
|
|
if (istat & 0x8000) { /* Sequence Start Code */
|
|
/* reset frame counter, load sizes */
|
|
saa->vidinfo.frame_count = 0;
|
|
saa->vidinfo.h_size = 704;
|
|
saa->vidinfo.v_size = 480;
|
|
#if 0
|
|
if (saa->endmarkhead != saa->endmarktail) {
|
|
saa->audhead =
|
|
saa->endmark[saa->endmarkhead];
|
|
saa->endmarkhead++;
|
|
if (saa->endmarkhead >= MAX_MARKS)
|
|
saa->endmarkhead = 0;
|
|
}
|
|
#endif
|
|
}
|
|
if (istat & 0x4000) { /* Sequence Error Code */
|
|
if (saa->endmarkhead != saa->endmarktail) {
|
|
saa->audhead =
|
|
saa->endmark[saa->endmarkhead];
|
|
saa->endmarkhead++;
|
|
if (saa->endmarkhead >= MAX_MARKS)
|
|
saa->endmarkhead = 0;
|
|
}
|
|
}
|
|
}
|
|
#ifdef IDEBUG
|
|
if (astat & SAA7146_PSR_PPEF) {
|
|
IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_PABO) {
|
|
IDEBUG(printk("stradis%d irq: PABO\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_PPED) {
|
|
IDEBUG(printk("stradis%d irq: PPED\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_I1) {
|
|
IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_I0) {
|
|
IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_LATE1) {
|
|
IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_LATE0) {
|
|
IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_E1) {
|
|
IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_E0) {
|
|
IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_TO1) {
|
|
IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_RPS_TO0) {
|
|
IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_UPLD) {
|
|
IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_DEBI_E) {
|
|
IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_I2C_S) {
|
|
IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_I2C_E) {
|
|
IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_A2_IN) {
|
|
IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_A2_OUT) {
|
|
IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_A1_IN) {
|
|
IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_A1_OUT) {
|
|
IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_AFOU) {
|
|
IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_V_PE) {
|
|
IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_VFOU) {
|
|
IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_FIDA) {
|
|
IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_FIDB) {
|
|
IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_PIN3) {
|
|
IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_PIN2) {
|
|
IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_PIN0) {
|
|
IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_ECS) {
|
|
IDEBUG(printk("stradis%d irq: ECS\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_EC3S) {
|
|
IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr));
|
|
}
|
|
if (astat & SAA7146_PSR_EC0S) {
|
|
IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr));
|
|
}
|
|
#endif
|
|
count++;
|
|
if (count > 15)
|
|
printk(KERN_WARNING "stradis%d: irq loop %d\n",
|
|
saa->nr, count);
|
|
if (count > 20) {
|
|
saawrite(0, SAA7146_IER);
|
|
printk(KERN_ERR
|
|
"stradis%d: IRQ loop cleared\n", saa->nr);
|
|
}
|
|
}
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int ibm_send_command(struct saa7146 *saa,
|
|
int command, int data, int chain)
|
|
{
|
|
int i;
|
|
|
|
if (chain)
|
|
debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1)| 1,2);
|
|
else
|
|
debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2);
|
|
for (i = 0; i < 100 &&
|
|
(debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++)
|
|
schedule();
|
|
if (i == 100)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static void cs4341_setlevel(struct saa7146 *saa, int left, int right)
|
|
{
|
|
I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2);
|
|
I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2);
|
|
}
|
|
|
|
static void initialize_cs4341(struct saa7146 *saa)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 200; i++) {
|
|
/* auto mute off, power on, no de-emphasis */
|
|
/* I2S data up to 24-bit 64xFs internal SCLK */
|
|
I2CWrite(saa, 0x22, 0x01, 0x11, 2);
|
|
/* ATAPI mixer settings */
|
|
I2CWrite(saa, 0x22, 0x02, 0x49, 2);
|
|
/* attenuation left 3db */
|
|
I2CWrite(saa, 0x22, 0x03, 0x00, 2);
|
|
/* attenuation right 3db */
|
|
I2CWrite(saa, 0x22, 0x04, 0x00, 2);
|
|
I2CWrite(saa, 0x22, 0x01, 0x10, 2);
|
|
if (I2CRead(saa, 0x22, 0x02, 1) == 0x49)
|
|
break;
|
|
schedule();
|
|
}
|
|
printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i);
|
|
return;
|
|
}
|
|
|
|
static void initialize_cs8420(struct saa7146 *saa, int pro)
|
|
{
|
|
int i;
|
|
u8 *sequence;
|
|
if (pro)
|
|
sequence = mode8420pro;
|
|
else
|
|
sequence = mode8420con;
|
|
for (i = 0; i < INIT8420LEN; i++)
|
|
I2CWrite(saa, 0x20, init8420[i * 2], init8420[i * 2 + 1], 2);
|
|
for (i = 0; i < MODE8420LEN; i++)
|
|
I2CWrite(saa, 0x20, sequence[i * 2], sequence[i * 2 + 1], 2);
|
|
printk("stradis%d: CS8420 initialized\n", saa->nr);
|
|
}
|
|
|
|
static void initialize_saa7121(struct saa7146 *saa, int dopal)
|
|
{
|
|
int i, mod;
|
|
u8 *sequence;
|
|
if (dopal)
|
|
sequence = init7121pal;
|
|
else
|
|
sequence = init7121ntsc;
|
|
mod = saaread(SAA7146_PSR) & 0x08;
|
|
/* initialize PAL/NTSC video encoder */
|
|
for (i = 0; i < INIT7121LEN; i++) {
|
|
if (NewCard) { /* handle new card encoder differences */
|
|
if (sequence[i * 2] == 0x3a)
|
|
I2CWrite(saa, 0x88, 0x3a, 0x13, 2);
|
|
else if (sequence[i * 2] == 0x6b)
|
|
I2CWrite(saa, 0x88, 0x6b, 0x20, 2);
|
|
else if (sequence[i * 2] == 0x6c)
|
|
I2CWrite(saa, 0x88, 0x6c,
|
|
dopal ? 0x09 : 0xf5, 2);
|
|
else if (sequence[i * 2] == 0x6d)
|
|
I2CWrite(saa, 0x88, 0x6d,
|
|
dopal ? 0x20 : 0x00, 2);
|
|
else if (sequence[i * 2] == 0x7a)
|
|
I2CWrite(saa, 0x88, 0x7a,
|
|
dopal ? (PALFirstActive - 1) :
|
|
(NTSCFirstActive - 4), 2);
|
|
else if (sequence[i * 2] == 0x7b)
|
|
I2CWrite(saa, 0x88, 0x7b,
|
|
dopal ? PALLastActive :
|
|
NTSCLastActive, 2);
|
|
else
|
|
I2CWrite(saa, 0x88, sequence[i * 2],
|
|
sequence[i * 2 + 1], 2);
|
|
} else {
|
|
if (sequence[i * 2] == 0x6b && mod)
|
|
I2CWrite(saa, 0x88, 0x6b,
|
|
(sequence[i * 2 + 1] ^ 0x09), 2);
|
|
else if (sequence[i * 2] == 0x7a)
|
|
I2CWrite(saa, 0x88, 0x7a,
|
|
dopal ? (PALFirstActive - 1) :
|
|
(NTSCFirstActive - 4), 2);
|
|
else if (sequence[i * 2] == 0x7b)
|
|
I2CWrite(saa, 0x88, 0x7b,
|
|
dopal ? PALLastActive :
|
|
NTSCLastActive, 2);
|
|
else
|
|
I2CWrite(saa, 0x88, sequence[i * 2],
|
|
sequence[i * 2 + 1], 2);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_genlock_offset(struct saa7146 *saa, int noffset)
|
|
{
|
|
int nCode;
|
|
int PixelsPerLine = 858;
|
|
if (CurrentMode == VIDEO_MODE_PAL)
|
|
PixelsPerLine = 864;
|
|
if (noffset > 500)
|
|
noffset = 500;
|
|
else if (noffset < -500)
|
|
noffset = -500;
|
|
nCode = noffset + 0x100;
|
|
if (nCode == 1)
|
|
nCode = 0x401;
|
|
else if (nCode < 1)
|
|
nCode = 0x400 + PixelsPerLine + nCode;
|
|
debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2);
|
|
}
|
|
|
|
static void set_out_format(struct saa7146 *saa, int mode)
|
|
{
|
|
initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1));
|
|
saa->boardcfg[2] = mode;
|
|
/* do not adjust analog video parameters here, use saa7121 init */
|
|
/* you will affect the SDI output on the new card */
|
|
if (mode == VIDEO_MODE_PAL) { /* PAL */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2);
|
|
mdelay(50);
|
|
saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1);
|
|
if (NewCard) {
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, 0xe100, 2);
|
|
mdelay(50);
|
|
}
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
|
|
NewCard ? 0xe500 : 0x6500, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
|
|
(1 << 8) |
|
|
(NewCard ? PALFirstActive : PALFirstActive - 6), 2);
|
|
} else { /* NTSC */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2);
|
|
mdelay(50);
|
|
saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
|
|
NewCard ? 0xe100 : 0x6100, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
|
|
(1 << 8) |
|
|
(NewCard ? NTSCFirstActive : NTSCFirstActive - 6), 2);
|
|
}
|
|
}
|
|
|
|
/* Intialize bitmangler to map from a byte value to the mangled word that
|
|
* must be output to program the Xilinx part through the DEBI port.
|
|
* Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
|
|
* transfer FPGA code, init IBM chip, transfer IBM microcode
|
|
* rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0
|
|
*/
|
|
static u16 bitmangler[256];
|
|
|
|
static int initialize_fpga(struct video_code *bitdata)
|
|
{
|
|
int i, num, startindex, failure = 0, loadtwo, loadfile = 0;
|
|
u16 *dmabuf;
|
|
u8 *newdma;
|
|
struct saa7146 *saa;
|
|
|
|
/* verify fpga code */
|
|
for (startindex = 0; startindex < bitdata->datasize; startindex++)
|
|
if (bitdata->data[startindex] == 255)
|
|
break;
|
|
if (startindex == bitdata->datasize) {
|
|
printk(KERN_INFO "stradis: bad fpga code\n");
|
|
return -1;
|
|
}
|
|
/* initialize all detected cards */
|
|
for (num = 0; num < saa_num; num++) {
|
|
saa = &saa7146s[num];
|
|
if (saa->boardcfg[0] > 20)
|
|
continue; /* card was programmed */
|
|
loadtwo = (saa->boardcfg[18] & 0x10);
|
|
if (!NewCard) /* we have an old board */
|
|
for (i = 0; i < 256; i++)
|
|
bitmangler[i] = ((i & 0x01) << 15) |
|
|
((i & 0x02) << 6) | ((i & 0x04) << 4) |
|
|
((i & 0x08) << 9) | ((i & 0x10) << 7) |
|
|
((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
|
|
((i & 0x80) >> 7);
|
|
else /* else we have a new board */
|
|
for (i = 0; i < 256; i++)
|
|
bitmangler[i] = ((i & 0x01) << 7) |
|
|
((i & 0x02) << 5) | ((i & 0x04) << 3) |
|
|
((i & 0x08) << 1) | ((i & 0x10) >> 1) |
|
|
((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
|
|
((i & 0x80) >> 7);
|
|
|
|
dmabuf = (u16 *) saa->dmadebi;
|
|
newdma = (u8 *) saa->dmadebi;
|
|
if (NewCard) { /* SDM2xxx */
|
|
if (!strncmp(bitdata->loadwhat, "decoder2", 8))
|
|
continue; /* fpga not for this card */
|
|
if (!strncmp(&saa->boardcfg[42], bitdata->loadwhat, 8))
|
|
loadfile = 1;
|
|
else if (loadtwo && !strncmp(&saa->boardcfg[19],
|
|
bitdata->loadwhat, 8))
|
|
loadfile = 2;
|
|
else if (!saa->boardcfg[42] && !strncmp("decxl",
|
|
bitdata->loadwhat, 8))
|
|
loadfile = 1; /* special */
|
|
else
|
|
continue; /* fpga not for this card */
|
|
if (loadfile != 1 && loadfile != 2)
|
|
continue; /* skip to next card */
|
|
if (saa->boardcfg[0] && loadfile == 1)
|
|
continue; /* skip to next card */
|
|
if (saa->boardcfg[0] != 1 && loadfile == 2)
|
|
continue; /* skip to next card */
|
|
saa->boardcfg[0]++; /* mark fpga handled */
|
|
printk("stradis%d: loading %s\n", saa->nr,
|
|
bitdata->loadwhat);
|
|
if (loadtwo && loadfile == 2)
|
|
goto send_fpga_stuff;
|
|
/* turn on the Audio interface to set PROG low */
|
|
saawrite(0x00400040, SAA7146_GPIO_CTRL);
|
|
saaread(SAA7146_PSR); /* ensure posted write */
|
|
/* wait for everyone to reset */
|
|
mdelay(10);
|
|
saawrite(0x00400000, SAA7146_GPIO_CTRL);
|
|
} else { /* original card */
|
|
if (strncmp(bitdata->loadwhat, "decoder2", 8))
|
|
continue; /* fpga not for this card */
|
|
/* Pull the Xilinx PROG signal WS3 low */
|
|
saawrite(0x02000200, SAA7146_MC1);
|
|
/* Turn on the Audio interface so can set PROG low */
|
|
saawrite(0x000000c0, SAA7146_ACON1);
|
|
/* Pull the Xilinx INIT signal (GPIO2) low */
|
|
saawrite(0x00400000, SAA7146_GPIO_CTRL);
|
|
/* Make sure everybody resets */
|
|
saaread(SAA7146_PSR); /* ensure posted write */
|
|
mdelay(10);
|
|
/* Release the Xilinx PROG signal */
|
|
saawrite(0x00000000, SAA7146_ACON1);
|
|
/* Turn off the Audio interface */
|
|
saawrite(0x02000000, SAA7146_MC1);
|
|
}
|
|
/* Release Xilinx INIT signal (WS2) */
|
|
saawrite(0x00000000, SAA7146_GPIO_CTRL);
|
|
/* Wait for the INIT to go High */
|
|
for (i = 0;
|
|
i < 10000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
|
|
i++)
|
|
schedule();
|
|
if (i == 1000) {
|
|
printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr);
|
|
return -1;
|
|
}
|
|
send_fpga_stuff:
|
|
if (NewCard) {
|
|
for (i = startindex; i < bitdata->datasize; i++)
|
|
newdma[i - startindex] =
|
|
bitmangler[bitdata->data[i]];
|
|
debiwrite(saa, 0x01420000, 0, 0,
|
|
((bitdata->datasize - startindex) + 5));
|
|
if (loadtwo && loadfile == 1) {
|
|
printk("stradis%d: awaiting 2nd FPGA bitfile\n",
|
|
saa->nr);
|
|
continue; /* skip to next card */
|
|
}
|
|
} else {
|
|
for (i = startindex; i < bitdata->datasize; i++)
|
|
dmabuf[i - startindex] =
|
|
bitmangler[bitdata->data[i]];
|
|
debiwrite(saa, 0x014a0000, 0, 0,
|
|
((bitdata->datasize - startindex) + 5) * 2);
|
|
}
|
|
for (i = 0;
|
|
i < 1000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
|
|
i++)
|
|
schedule();
|
|
if (i == 1000) {
|
|
printk(KERN_INFO "stradis%d: FPGA load failed\n",
|
|
saa->nr);
|
|
failure++;
|
|
continue;
|
|
}
|
|
if (!NewCard) {
|
|
/* Pull the Xilinx INIT signal (GPIO2) low */
|
|
saawrite(0x00400000, SAA7146_GPIO_CTRL);
|
|
saaread(SAA7146_PSR); /* ensure posted write */
|
|
mdelay(2);
|
|
saawrite(0x00000000, SAA7146_GPIO_CTRL);
|
|
mdelay(2);
|
|
}
|
|
printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr);
|
|
saa->boardcfg[0] = 26; /* mark fpga programmed */
|
|
/* set VXCO to its lowest frequency */
|
|
debiwrite(saa, debNormal, XILINX_PWM, 0, 2);
|
|
if (NewCard) {
|
|
/* mute CS3310 */
|
|
if (HaveCS3310)
|
|
debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
|
|
0, 2);
|
|
/* set VXCO to PWM mode, release reset, blank on */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2);
|
|
mdelay(10);
|
|
/* unmute CS3310 */
|
|
if (HaveCS3310)
|
|
debiwrite(saa, debNormal, XILINX_CTL0,
|
|
0x2020, 2);
|
|
}
|
|
/* set source Black */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
|
|
saa->boardcfg[4] = 22; /* set NTSC First Active Line */
|
|
saa->boardcfg[5] = 23; /* set PAL First Active Line */
|
|
saa->boardcfg[54] = 2; /* set NTSC Last Active Line - 256 */
|
|
saa->boardcfg[55] = 54; /* set PAL Last Active Line - 256 */
|
|
set_out_format(saa, VIDEO_MODE_NTSC);
|
|
mdelay(50);
|
|
/* begin IBM chip init */
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
|
|
saaread(SAA7146_PSR); /* wait for reset */
|
|
mdelay(5);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
|
|
debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
|
|
if (NewCard) {
|
|
mdelay(5);
|
|
/* set i2s rate converter to 48KHz */
|
|
debiwrite(saa, debNormal, 0x80c0, 6, 2);
|
|
/* we must init CS8420 first since rev b pulls i2s */
|
|
/* master clock low and CS4341 needs i2s master to */
|
|
/* run the i2c port. */
|
|
if (HaveCS8420)
|
|
/* 0=consumer, 1=pro */
|
|
initialize_cs8420(saa, 0);
|
|
|
|
mdelay(5);
|
|
if (HaveCS4341)
|
|
initialize_cs4341(saa);
|
|
}
|
|
debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
|
|
if (NewCard)
|
|
set_genlock_offset(saa, 0);
|
|
debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
|
|
#if 0
|
|
/* enable genlock */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2);
|
|
#else
|
|
/* disable genlock */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2);
|
|
#endif
|
|
}
|
|
|
|
return failure;
|
|
}
|
|
|
|
static int do_ibm_reset(struct saa7146 *saa)
|
|
{
|
|
/* failure if decoder not previously programmed */
|
|
if (saa->boardcfg[0] < 37)
|
|
return -EIO;
|
|
/* mute CS3310 */
|
|
if (HaveCS3310)
|
|
debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2);
|
|
/* disable interrupts */
|
|
saawrite(0, SAA7146_IER);
|
|
saa->audhead = saa->audtail = 0;
|
|
saa->vidhead = saa->vidtail = 0;
|
|
/* tristate debi bus, disable debi transfers */
|
|
saawrite(0x00880000, SAA7146_MC1);
|
|
/* ensure posted write */
|
|
saaread(SAA7146_MC1);
|
|
mdelay(50);
|
|
/* re-enable debi transfers */
|
|
saawrite(0x00880088, SAA7146_MC1);
|
|
/* set source Black */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
|
|
/* begin IBM chip init */
|
|
set_out_format(saa, CurrentMode);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
|
|
saaread(SAA7146_PSR); /* wait for reset */
|
|
mdelay(5);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
|
|
debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
|
|
if (NewCard) {
|
|
mdelay(5);
|
|
/* set i2s rate converter to 48KHz */
|
|
debiwrite(saa, debNormal, 0x80c0, 6, 2);
|
|
/* we must init CS8420 first since rev b pulls i2s */
|
|
/* master clock low and CS4341 needs i2s master to */
|
|
/* run the i2c port. */
|
|
if (HaveCS8420)
|
|
/* 0=consumer, 1=pro */
|
|
initialize_cs8420(saa, 1);
|
|
|
|
mdelay(5);
|
|
if (HaveCS4341)
|
|
initialize_cs4341(saa);
|
|
}
|
|
debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
|
|
if (NewCard)
|
|
set_genlock_offset(saa, 0);
|
|
debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
|
|
if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
|
|
(ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) {
|
|
printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr);
|
|
}
|
|
if (HaveCS3310) {
|
|
int i = CS3310MaxLvl;
|
|
debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i << 8)| i),2);
|
|
}
|
|
/* start video decoder */
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
|
|
/* 256k vid, 3520 bytes aud */
|
|
debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
|
|
ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
|
|
/* enable buffer threshold irq */
|
|
debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
|
|
/* clear pending interrupts */
|
|
debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* load the decoder microcode */
|
|
static int initialize_ibmmpeg2(struct video_code *microcode)
|
|
{
|
|
int i, num;
|
|
struct saa7146 *saa;
|
|
|
|
for (num = 0; num < saa_num; num++) {
|
|
saa = &saa7146s[num];
|
|
/* check that FPGA is loaded */
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2);
|
|
i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2);
|
|
if (i != 0xa55a) {
|
|
printk(KERN_INFO "stradis%d: %04x != 0xa55a\n",
|
|
saa->nr, i);
|
|
#if 0
|
|
return -1;
|
|
#endif
|
|
}
|
|
if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) {
|
|
if (saa->boardcfg[0] > 27)
|
|
continue; /* skip to next card */
|
|
/* load video control store */
|
|
saa->boardcfg[1] = 0x13; /* no-sync default */
|
|
debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
|
|
for (i = 0; i < microcode->datasize / 2; i++)
|
|
debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA,
|
|
(microcode->data[i * 2] << 8) |
|
|
microcode->data[i * 2 + 1], 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
|
|
ChipControl, 2);
|
|
saa->boardcfg[0] = 28;
|
|
}
|
|
if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) {
|
|
if (saa->boardcfg[0] > 35)
|
|
continue; /* skip to next card */
|
|
/* load audio control store */
|
|
debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
|
|
for (i = 0; i < microcode->datasize; i++)
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA,
|
|
microcode->data[i], 1);
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
|
|
if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
|
|
0xe000, 1)) {
|
|
printk(KERN_ERR "stradis%d: IBM config "
|
|
"failed\n", saa->nr);
|
|
return -1;
|
|
}
|
|
/* set PWM to center value */
|
|
if (NewCard) {
|
|
debiwrite(saa, debNormal, XILINX_PWM,
|
|
saa->boardcfg[14] +
|
|
(saa->boardcfg[13] << 8), 2);
|
|
} else
|
|
debiwrite(saa, debNormal, XILINX_PWM, 0x46, 2);
|
|
|
|
if (HaveCS3310) {
|
|
i = CS3310MaxLvl;
|
|
debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
|
|
(i << 8) | i, 2);
|
|
}
|
|
printk(KERN_INFO "stradis%d: IBM MPEGCD%d Inited\n",
|
|
saa->nr, 18 + (debiread(saa, debNormal,
|
|
IBM_MP2_CHIP_CONTROL, 2) >> 12));
|
|
/* start video decoder */
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
|
|
ChipControl, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037,
|
|
2); /* 256k vid, 3520 bytes aud */
|
|
debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
|
|
ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
|
|
/* enable buffer threshold irq */
|
|
debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
|
|
debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
|
|
/* enable gpio irq */
|
|
saawrite(0x00002000, SAA7146_GPIO_CTRL);
|
|
/* enable decoder output to HPS */
|
|
debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
|
|
saa->boardcfg[0] = 37;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 palette2fmt[] = { /* some of these YUV translations are wrong */
|
|
0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000,
|
|
0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000,
|
|
0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000
|
|
};
|
|
static int bpp2fmt[4] = {
|
|
VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24,
|
|
VIDEO_PALETTE_RGB32
|
|
};
|
|
|
|
/* I wish I could find a formula to calculate these... */
|
|
static u32 h_prescale[64] = {
|
|
0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808,
|
|
0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460,
|
|
0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f,
|
|
0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000,
|
|
0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000,
|
|
0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000,
|
|
0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000,
|
|
0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000,
|
|
0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000,
|
|
0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000,
|
|
0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000,
|
|
};
|
|
static u32 v_gain[64] = {
|
|
0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff,
|
|
0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff,
|
|
0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
|
|
};
|
|
|
|
static void saa7146_set_winsize(struct saa7146 *saa)
|
|
{
|
|
u32 format;
|
|
int offset, yacl, ysci;
|
|
saa->win.color_fmt = format =
|
|
(saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] :
|
|
palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]];
|
|
offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl;
|
|
saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1);
|
|
saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1);
|
|
saawrite(saa->win.bpl * 2, SAA7146_PITCH1);
|
|
saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight,
|
|
SAA7146_PROT_ADDR1);
|
|
saawrite(0, SAA7146_PAGE1);
|
|
saawrite(format | 0x60, SAA7146_CLIP_FORMAT_CTRL);
|
|
offset = (704 / (saa->win.width - 1)) & 0x3f;
|
|
saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE);
|
|
offset = (720896 / saa->win.width) / (offset + 1);
|
|
saawrite((offset << 12) | 0x0c, SAA7146_HPS_H_SCALE);
|
|
if (CurrentMode == VIDEO_MODE_NTSC) {
|
|
yacl = /*(480 / saa->win.height - 1) & 0x3f */ 0;
|
|
ysci = 1024 - (saa->win.height * 1024 / 480);
|
|
} else {
|
|
yacl = /*(576 / saa->win.height - 1) & 0x3f */ 0;
|
|
ysci = 1024 - (saa->win.height * 1024 / 576);
|
|
}
|
|
saawrite((1 << 31) | (ysci << 21) | (yacl << 15), SAA7146_HPS_V_SCALE);
|
|
saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN);
|
|
saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V |
|
|
SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 |
|
|
SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H), SAA7146_MC2);
|
|
}
|
|
|
|
/* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
|
|
* bitmap is fixed width, 128 bytes (1024 pixels represented)
|
|
* arranged most-sigificant-bit-left in 32-bit words
|
|
* based on saa7146 clipping hardware, it swaps bytes if LE
|
|
* much of this makes up for egcs brain damage -- so if you
|
|
* are wondering "why did he do this?" it is because the C
|
|
* was adjusted to generate the optimal asm output without
|
|
* writing non-portable __asm__ directives.
|
|
*/
|
|
|
|
static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h)
|
|
{
|
|
register int startword, endword;
|
|
register u32 bitsleft, bitsright;
|
|
u32 *temp;
|
|
if (x < 0) {
|
|
w += x;
|
|
x = 0;
|
|
}
|
|
if (y < 0) {
|
|
h += y;
|
|
y = 0;
|
|
}
|
|
if (w <= 0 || h <= 0 || x > 1023 || y > 639)
|
|
return; /* throw away bad clips */
|
|
if (x + w > 1024)
|
|
w = 1024 - x;
|
|
if (y + h > 640)
|
|
h = 640 - y;
|
|
startword = (x >> 5);
|
|
endword = ((x + w) >> 5);
|
|
bitsleft = (0xffffffff >> (x & 31));
|
|
bitsright = (0xffffffff << (~((x + w) - (endword << 5))));
|
|
temp = &clipmap[(y << 5) + startword];
|
|
w = endword - startword;
|
|
if (!w) {
|
|
bitsleft |= bitsright;
|
|
for (y = 0; y < h; y++) {
|
|
*temp |= bitsleft;
|
|
temp += 32;
|
|
}
|
|
} else {
|
|
for (y = 0; y < h; y++) {
|
|
*temp++ |= bitsleft;
|
|
for (x = 1; x < w; x++)
|
|
*temp++ = 0xffffffff;
|
|
*temp |= bitsright;
|
|
temp += (32 - w);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr)
|
|
{
|
|
int i, width, height;
|
|
u32 *clipmap;
|
|
|
|
clipmap = saa->dmavid2;
|
|
if ((width = saa->win.width) > 1023)
|
|
width = 1023; /* sanity check */
|
|
if ((height = saa->win.height) > 640)
|
|
height = 639; /* sanity check */
|
|
if (ncr > 0) { /* rectangles pased */
|
|
/* convert rectangular clips to a bitmap */
|
|
memset(clipmap, 0, VIDEO_CLIPMAP_SIZE); /* clear map */
|
|
for (i = 0; i < ncr; i++)
|
|
clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
|
|
cr[i].width, cr[i].height);
|
|
}
|
|
/* clip against viewing window AND screen
|
|
so we do not have to rely on the user program
|
|
*/
|
|
clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ?
|
|
(saa->win.swidth - saa->win.x) : width, 0, 1024, 768);
|
|
clip_draw_rectangle(clipmap, 0,
|
|
(saa->win.y + height > saa->win.sheight) ?
|
|
(saa->win.sheight - saa->win.y) : height, 1024, 768);
|
|
if (saa->win.x < 0)
|
|
clip_draw_rectangle(clipmap, 0, 0, -saa->win.x, 768);
|
|
if (saa->win.y < 0)
|
|
clip_draw_rectangle(clipmap, 0, 0, 1024, -saa->win.y);
|
|
}
|
|
|
|
static int saa_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long argl)
|
|
{
|
|
struct saa7146 *saa = file->private_data;
|
|
void __user *arg = (void __user *)argl;
|
|
|
|
switch (cmd) {
|
|
case VIDIOCGCAP:
|
|
{
|
|
struct video_capability b;
|
|
strcpy(b.name, saa->video_dev.name);
|
|
b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY |
|
|
VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM |
|
|
VID_TYPE_SCALES;
|
|
b.channels = 1;
|
|
b.audios = 1;
|
|
b.maxwidth = 768;
|
|
b.maxheight = 576;
|
|
b.minwidth = 32;
|
|
b.minheight = 32;
|
|
if (copy_to_user(arg, &b, sizeof(b)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCGPICT:
|
|
{
|
|
struct video_picture p = saa->picture;
|
|
if (saa->win.depth == 8)
|
|
p.palette = VIDEO_PALETTE_HI240;
|
|
if (saa->win.depth == 15)
|
|
p.palette = VIDEO_PALETTE_RGB555;
|
|
if (saa->win.depth == 16)
|
|
p.palette = VIDEO_PALETTE_RGB565;
|
|
if (saa->win.depth == 24)
|
|
p.palette = VIDEO_PALETTE_RGB24;
|
|
if (saa->win.depth == 32)
|
|
p.palette = VIDEO_PALETTE_RGB32;
|
|
if (copy_to_user(arg, &p, sizeof(p)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSPICT:
|
|
{
|
|
struct video_picture p;
|
|
u32 format;
|
|
if (copy_from_user(&p, arg, sizeof(p)))
|
|
return -EFAULT;
|
|
if (p.palette < ARRAY_SIZE(palette2fmt)) {
|
|
format = palette2fmt[p.palette];
|
|
saa->win.color_fmt = format;
|
|
saawrite(format | 0x60,
|
|
SAA7146_CLIP_FORMAT_CTRL);
|
|
}
|
|
saawrite(((p.brightness & 0xff00) << 16) |
|
|
((p.contrast & 0xfe00) << 7) |
|
|
((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL);
|
|
saa->picture = p;
|
|
/* upload changed registers */
|
|
saawrite(((SAA7146_MC2_UPLD_HPS_H |
|
|
SAA7146_MC2_UPLD_HPS_V) << 16) |
|
|
SAA7146_MC2_UPLD_HPS_H |
|
|
SAA7146_MC2_UPLD_HPS_V, SAA7146_MC2);
|
|
return 0;
|
|
}
|
|
case VIDIOCSWIN:
|
|
{
|
|
struct video_window vw;
|
|
struct video_clip *vcp = NULL;
|
|
|
|
if (copy_from_user(&vw, arg, sizeof(vw)))
|
|
return -EFAULT;
|
|
|
|
/* stop capture */
|
|
if (vw.flags || vw.width < 16 || vw.height < 16) {
|
|
saawrite((SAA7146_MC1_TR_E_1 << 16),
|
|
SAA7146_MC1);
|
|
return -EINVAL;
|
|
}
|
|
/* 32-bit align start and adjust width */
|
|
if (saa->win.bpp < 4) {
|
|
int i = vw.x;
|
|
vw.x = (vw.x + 3) & ~3;
|
|
i = vw.x - i;
|
|
vw.width -= i;
|
|
}
|
|
saa->win.x = vw.x;
|
|
saa->win.y = vw.y;
|
|
saa->win.width = vw.width;
|
|
if (saa->win.width > 768)
|
|
saa->win.width = 768;
|
|
saa->win.height = vw.height;
|
|
if (CurrentMode == VIDEO_MODE_NTSC) {
|
|
if (saa->win.height > 480)
|
|
saa->win.height = 480;
|
|
} else {
|
|
if (saa->win.height > 576)
|
|
saa->win.height = 576;
|
|
}
|
|
|
|
/* stop capture */
|
|
saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1);
|
|
saa7146_set_winsize(saa);
|
|
|
|
/*
|
|
* Do any clips.
|
|
*/
|
|
if (vw.clipcount < 0) {
|
|
if (copy_from_user(saa->dmavid2, vw.clips,
|
|
VIDEO_CLIPMAP_SIZE))
|
|
return -EFAULT;
|
|
} else if (vw.clipcount > 16384) {
|
|
return -EINVAL;
|
|
} else if (vw.clipcount > 0) {
|
|
vcp = vmalloc(sizeof(struct video_clip) *
|
|
vw.clipcount);
|
|
if (vcp == NULL)
|
|
return -ENOMEM;
|
|
if (copy_from_user(vcp, vw.clips,
|
|
sizeof(struct video_clip) *
|
|
vw.clipcount)) {
|
|
vfree(vcp);
|
|
return -EFAULT;
|
|
}
|
|
} else /* nothing clipped */
|
|
memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE);
|
|
|
|
make_clip_tab(saa, vcp, vw.clipcount);
|
|
if (vw.clipcount > 0)
|
|
vfree(vcp);
|
|
|
|
/* start capture & clip dma if we have an address */
|
|
if ((saa->cap & 3) && saa->win.vidadr != 0)
|
|
saawrite(((SAA7146_MC1_TR_E_1 |
|
|
SAA7146_MC1_TR_E_2) << 16) | 0xffff,
|
|
SAA7146_MC1);
|
|
return 0;
|
|
}
|
|
case VIDIOCGWIN:
|
|
{
|
|
struct video_window vw;
|
|
vw.x = saa->win.x;
|
|
vw.y = saa->win.y;
|
|
vw.width = saa->win.width;
|
|
vw.height = saa->win.height;
|
|
vw.chromakey = 0;
|
|
vw.flags = 0;
|
|
if (copy_to_user(arg, &vw, sizeof(vw)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCCAPTURE:
|
|
{
|
|
int v;
|
|
if (copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
if (v == 0) {
|
|
saa->cap &= ~1;
|
|
saawrite((SAA7146_MC1_TR_E_1 << 16),
|
|
SAA7146_MC1);
|
|
} else {
|
|
if (saa->win.vidadr == 0 || saa->win.width == 0
|
|
|| saa->win.height == 0)
|
|
return -EINVAL;
|
|
saa->cap |= 1;
|
|
saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff,
|
|
SAA7146_MC1);
|
|
}
|
|
return 0;
|
|
}
|
|
case VIDIOCGFBUF:
|
|
{
|
|
struct video_buffer v;
|
|
v.base = (void *)saa->win.vidadr;
|
|
v.height = saa->win.sheight;
|
|
v.width = saa->win.swidth;
|
|
v.depth = saa->win.depth;
|
|
v.bytesperline = saa->win.bpl;
|
|
if (copy_to_user(arg, &v, sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
}
|
|
case VIDIOCSFBUF:
|
|
{
|
|
struct video_buffer v;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
if (copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
if (v.depth != 8 && v.depth != 15 && v.depth != 16 &&
|
|
v.depth != 24 && v.depth != 32 && v.width > 16 &&
|
|
v.height > 16 && v.bytesperline > 16)
|
|
return -EINVAL;
|
|
if (v.base)
|
|
saa->win.vidadr = (unsigned long)v.base;
|
|
saa->win.sheight = v.height;
|
|
saa->win.swidth = v.width;
|
|
saa->win.bpp = ((v.depth + 7) & 0x38) / 8;
|
|
saa->win.depth = v.depth;
|
|
saa->win.bpl = v.bytesperline;
|
|
|
|
DEBUG(printk("Display at %p is %d by %d, bytedepth %d, "
|
|
"bpl %d\n", v.base, v.width, v.height,
|
|
saa->win.bpp, saa->win.bpl));
|
|
saa7146_set_winsize(saa);
|
|
return 0;
|
|
}
|
|
case VIDIOCKEY:
|
|
{
|
|
/* Will be handled higher up .. */
|
|
return 0;
|
|
}
|
|
|
|
case VIDIOCGAUDIO:
|
|
{
|
|
struct video_audio v;
|
|
v = saa->audio_dev;
|
|
v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
|
|
v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
|
|
strcpy(v.name, "MPEG");
|
|
v.mode = VIDEO_SOUND_STEREO;
|
|
if (copy_to_user(arg, &v, sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSAUDIO:
|
|
{
|
|
struct video_audio v;
|
|
int i;
|
|
if (copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
i = (~(v.volume >> 8)) & 0xff;
|
|
if (!HaveCS4341) {
|
|
if (v.flags & VIDEO_AUDIO_MUTE)
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_FRNT_ATTEN, 0xffff, 2);
|
|
if (!(v.flags & VIDEO_AUDIO_MUTE))
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_FRNT_ATTEN, 0x0000, 2);
|
|
if (v.flags & VIDEO_AUDIO_VOLUME)
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_FRNT_ATTEN,
|
|
(i << 8) | i, 2);
|
|
} else {
|
|
if (v.flags & VIDEO_AUDIO_MUTE)
|
|
cs4341_setlevel(saa, 0xff, 0xff);
|
|
if (!(v.flags & VIDEO_AUDIO_MUTE))
|
|
cs4341_setlevel(saa, 0, 0);
|
|
if (v.flags & VIDEO_AUDIO_VOLUME)
|
|
cs4341_setlevel(saa, i, i);
|
|
}
|
|
saa->audio_dev = v;
|
|
return 0;
|
|
}
|
|
|
|
case VIDIOCGUNIT:
|
|
{
|
|
struct video_unit vu;
|
|
vu.video = saa->video_dev.minor;
|
|
vu.vbi = VIDEO_NO_UNIT;
|
|
vu.radio = VIDEO_NO_UNIT;
|
|
vu.audio = VIDEO_NO_UNIT;
|
|
vu.teletext = VIDEO_NO_UNIT;
|
|
if (copy_to_user(arg, &vu, sizeof(vu)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSPLAYMODE:
|
|
{
|
|
struct video_play_mode pmode;
|
|
if (copy_from_user((void *)&pmode, arg,
|
|
sizeof(struct video_play_mode)))
|
|
return -EFAULT;
|
|
switch (pmode.mode) {
|
|
case VID_PLAY_VID_OUT_MODE:
|
|
if (pmode.p1 != VIDEO_MODE_NTSC &&
|
|
pmode.p1 != VIDEO_MODE_PAL)
|
|
return -EINVAL;
|
|
set_out_format(saa, pmode.p1);
|
|
return 0;
|
|
case VID_PLAY_GENLOCK:
|
|
debiwrite(saa, debNormal, XILINX_CTL0,
|
|
pmode.p1 ? 0x8000 : 0x8080, 2);
|
|
if (NewCard)
|
|
set_genlock_offset(saa, pmode.p2);
|
|
return 0;
|
|
case VID_PLAY_NORMAL:
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_CHIP_CONTROL, ChipControl, 2);
|
|
ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_PAUSE:
|
|
/* IBM removed the PAUSE command */
|
|
/* they say use SINGLE_FRAME now */
|
|
case VID_PLAY_SINGLE_FRAME:
|
|
ibm_send_command(saa, IBM_MP2_SINGLE_FRAME,0,0);
|
|
if (saa->playmode == pmode.mode) {
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_CHIP_CONTROL,
|
|
ChipControl, 2);
|
|
}
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_FAST_FORWARD:
|
|
ibm_send_command(saa, IBM_MP2_FAST_FORWARD,0,0);
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_SLOW_MOTION:
|
|
ibm_send_command(saa, IBM_MP2_SLOW_MOTION,
|
|
pmode.p1, 0);
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_IMMEDIATE_NORMAL:
|
|
/* ensure transfers resume */
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_CHIP_CONTROL, ChipControl, 2);
|
|
ibm_send_command(saa, IBM_MP2_IMED_NORM_PLAY,
|
|
0, 0);
|
|
saa->playmode = VID_PLAY_NORMAL;
|
|
return 0;
|
|
case VID_PLAY_SWITCH_CHANNELS:
|
|
saa->audhead = saa->audtail = 0;
|
|
saa->vidhead = saa->vidtail = 0;
|
|
ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,1);
|
|
ibm_send_command(saa, IBM_MP2_RESET_AUD_RATE,
|
|
0, 1);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
|
|
0, 2);
|
|
ibm_send_command(saa, IBM_MP2_CHANNEL_SWITCH,
|
|
0, 1);
|
|
debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
|
|
ChipControl, 2);
|
|
ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
|
|
saa->playmode = VID_PLAY_NORMAL;
|
|
return 0;
|
|
case VID_PLAY_FREEZE_FRAME:
|
|
ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,0);
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_STILL_MODE:
|
|
ibm_send_command(saa, IBM_MP2_SET_STILL_MODE,
|
|
0, 0);
|
|
saa->playmode = pmode.mode;
|
|
return 0;
|
|
case VID_PLAY_MASTER_MODE:
|
|
if (pmode.p1 == VID_PLAY_MASTER_NONE)
|
|
saa->boardcfg[1] = 0x13;
|
|
else if (pmode.p1 == VID_PLAY_MASTER_VIDEO)
|
|
saa->boardcfg[1] = 0x23;
|
|
else if (pmode.p1 == VID_PLAY_MASTER_AUDIO)
|
|
saa->boardcfg[1] = 0x43;
|
|
else
|
|
return -EINVAL;
|
|
debiwrite(saa, debNormal,
|
|
IBM_MP2_CHIP_CONTROL, ChipControl, 2);
|
|
return 0;
|
|
case VID_PLAY_ACTIVE_SCANLINES:
|
|
if (CurrentMode == VIDEO_MODE_PAL) {
|
|
if (pmode.p1 < 1 || pmode.p2 > 625)
|
|
return -EINVAL;
|
|
saa->boardcfg[5] = pmode.p1;
|
|
saa->boardcfg[55] = (pmode.p1 +
|
|
(pmode.p2 / 2) - 1) & 0xff;
|
|
} else {
|
|
if (pmode.p1 < 4 || pmode.p2 > 525)
|
|
return -EINVAL;
|
|
saa->boardcfg[4] = pmode.p1;
|
|
saa->boardcfg[54] = (pmode.p1 +
|
|
(pmode.p2 / 2) - 4) & 0xff;
|
|
}
|
|
set_out_format(saa, CurrentMode);
|
|
case VID_PLAY_RESET:
|
|
return do_ibm_reset(saa);
|
|
case VID_PLAY_END_MARK:
|
|
if (saa->endmarktail < saa->endmarkhead) {
|
|
if (saa->endmarkhead -
|
|
saa->endmarktail < 2)
|
|
return -ENOSPC;
|
|
} else if (saa->endmarkhead <=saa->endmarktail){
|
|
if (saa->endmarktail - saa->endmarkhead
|
|
> (MAX_MARKS - 2))
|
|
return -ENOSPC;
|
|
} else
|
|
return -ENOSPC;
|
|
saa->endmark[saa->endmarktail] = saa->audtail;
|
|
saa->endmarktail++;
|
|
if (saa->endmarktail >= MAX_MARKS)
|
|
saa->endmarktail = 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
case VIDIOCSWRITEMODE:
|
|
{
|
|
int mode;
|
|
if (copy_from_user((void *)&mode, arg, sizeof(int)))
|
|
return -EFAULT;
|
|
if (mode == VID_WRITE_MPEG_AUD ||
|
|
mode == VID_WRITE_MPEG_VID ||
|
|
mode == VID_WRITE_CC ||
|
|
mode == VID_WRITE_TTX ||
|
|
mode == VID_WRITE_OSD) {
|
|
saa->writemode = mode;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
case VIDIOCSMICROCODE:
|
|
{
|
|
struct video_code ucode;
|
|
__u8 *udata;
|
|
int i;
|
|
if (copy_from_user(&ucode, arg, sizeof(ucode)))
|
|
return -EFAULT;
|
|
if (ucode.datasize > 65536 || ucode.datasize < 1024 ||
|
|
strncmp(ucode.loadwhat, "dec", 3))
|
|
return -EINVAL;
|
|
if ((udata = vmalloc(ucode.datasize)) == NULL)
|
|
return -ENOMEM;
|
|
if (copy_from_user(udata, ucode.data, ucode.datasize)) {
|
|
vfree(udata);
|
|
return -EFAULT;
|
|
}
|
|
ucode.data = udata;
|
|
if (!strncmp(ucode.loadwhat, "decoder.aud", 11) ||
|
|
!strncmp(ucode.loadwhat, "decoder.vid", 11))
|
|
i = initialize_ibmmpeg2(&ucode);
|
|
else
|
|
i = initialize_fpga(&ucode);
|
|
vfree(udata);
|
|
if (i)
|
|
return -EINVAL;
|
|
return 0;
|
|
|
|
}
|
|
case VIDIOCGCHAN: /* this makes xawtv happy */
|
|
{
|
|
struct video_channel v;
|
|
if (copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
v.flags = VIDEO_VC_AUDIO;
|
|
v.tuners = 0;
|
|
v.type = VID_TYPE_MPEG_DECODER;
|
|
v.norm = CurrentMode;
|
|
strcpy(v.name, "MPEG2");
|
|
if (copy_to_user(arg, &v, sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSCHAN: /* this makes xawtv happy */
|
|
{
|
|
struct video_channel v;
|
|
if (copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
/* do nothing */
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int saa_mmap(struct file *file, struct vm_area_struct *vma)
|
|
{
|
|
struct saa7146 *saa = file->private_data;
|
|
printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t saa_read(struct file *file, char __user * buf,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t saa_write(struct file *file, const char __user * buf,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct saa7146 *saa = file->private_data;
|
|
unsigned long todo = count;
|
|
int blocksize, split;
|
|
unsigned long flags;
|
|
|
|
while (todo > 0) {
|
|
if (saa->writemode == VID_WRITE_MPEG_AUD) {
|
|
spin_lock_irqsave(&saa->lock, flags);
|
|
if (saa->audhead <= saa->audtail)
|
|
blocksize = 65536 -
|
|
(saa->audtail - saa->audhead);
|
|
else
|
|
blocksize = saa->audhead - saa->audtail;
|
|
spin_unlock_irqrestore(&saa->lock, flags);
|
|
if (blocksize < 16384) {
|
|
saawrite(SAA7146_PSR_DEBI_S |
|
|
SAA7146_PSR_PIN1, SAA7146_IER);
|
|
saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
|
|
/* wait for buffer space to open */
|
|
interruptible_sleep_on(&saa->audq);
|
|
}
|
|
spin_lock_irqsave(&saa->lock, flags);
|
|
if (saa->audhead <= saa->audtail) {
|
|
blocksize = 65536 -
|
|
(saa->audtail - saa->audhead);
|
|
split = 65536 - saa->audtail;
|
|
} else {
|
|
blocksize = saa->audhead - saa->audtail;
|
|
split = 65536;
|
|
}
|
|
spin_unlock_irqrestore(&saa->lock, flags);
|
|
blocksize--;
|
|
if (blocksize > todo)
|
|
blocksize = todo;
|
|
/* double check that we really have space */
|
|
if (!blocksize)
|
|
return -ENOSPC;
|
|
if (split < blocksize) {
|
|
if (copy_from_user(saa->audbuf +
|
|
saa->audtail, buf, split))
|
|
return -EFAULT;
|
|
buf += split;
|
|
todo -= split;
|
|
blocksize -= split;
|
|
saa->audtail = 0;
|
|
}
|
|
if (copy_from_user(saa->audbuf + saa->audtail, buf,
|
|
blocksize))
|
|
return -EFAULT;
|
|
saa->audtail += blocksize;
|
|
todo -= blocksize;
|
|
buf += blocksize;
|
|
saa->audtail &= 0xffff;
|
|
} else if (saa->writemode == VID_WRITE_MPEG_VID) {
|
|
spin_lock_irqsave(&saa->lock, flags);
|
|
if (saa->vidhead <= saa->vidtail)
|
|
blocksize = 524288 -
|
|
(saa->vidtail - saa->vidhead);
|
|
else
|
|
blocksize = saa->vidhead - saa->vidtail;
|
|
spin_unlock_irqrestore(&saa->lock, flags);
|
|
if (blocksize < 65536) {
|
|
saawrite(SAA7146_PSR_DEBI_S |
|
|
SAA7146_PSR_PIN1, SAA7146_IER);
|
|
saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
|
|
/* wait for buffer space to open */
|
|
interruptible_sleep_on(&saa->vidq);
|
|
}
|
|
spin_lock_irqsave(&saa->lock, flags);
|
|
if (saa->vidhead <= saa->vidtail) {
|
|
blocksize = 524288 -
|
|
(saa->vidtail - saa->vidhead);
|
|
split = 524288 - saa->vidtail;
|
|
} else {
|
|
blocksize = saa->vidhead - saa->vidtail;
|
|
split = 524288;
|
|
}
|
|
spin_unlock_irqrestore(&saa->lock, flags);
|
|
blocksize--;
|
|
if (blocksize > todo)
|
|
blocksize = todo;
|
|
/* double check that we really have space */
|
|
if (!blocksize)
|
|
return -ENOSPC;
|
|
if (split < blocksize) {
|
|
if (copy_from_user(saa->vidbuf +
|
|
saa->vidtail, buf, split))
|
|
return -EFAULT;
|
|
buf += split;
|
|
todo -= split;
|
|
blocksize -= split;
|
|
saa->vidtail = 0;
|
|
}
|
|
if (copy_from_user(saa->vidbuf + saa->vidtail, buf,
|
|
blocksize))
|
|
return -EFAULT;
|
|
saa->vidtail += blocksize;
|
|
todo -= blocksize;
|
|
buf += blocksize;
|
|
saa->vidtail &= 0x7ffff;
|
|
} else if (saa->writemode == VID_WRITE_OSD) {
|
|
if (count > 131072)
|
|
return -ENOSPC;
|
|
if (copy_from_user(saa->osdbuf, buf, count))
|
|
return -EFAULT;
|
|
buf += count;
|
|
saa->osdhead = 0;
|
|
saa->osdtail = count;
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2);
|
|
debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
|
|
debiread(saa, debNormal,
|
|
IBM_MP2_DISP_MODE, 2) | 1, 2);
|
|
/* trigger osd data transfer */
|
|
saawrite(SAA7146_PSR_DEBI_S |
|
|
SAA7146_PSR_PIN1, SAA7146_IER);
|
|
saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static int saa_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct video_device *vdev = video_devdata(file);
|
|
struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev);
|
|
|
|
file->private_data = saa;
|
|
|
|
saa->user++;
|
|
if (saa->user > 1)
|
|
return 0; /* device open already, don't reset */
|
|
saa->writemode = VID_WRITE_MPEG_VID; /* default to video */
|
|
return 0;
|
|
}
|
|
|
|
static int saa_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct saa7146 *saa = file->private_data;
|
|
saa->user--;
|
|
|
|
if (saa->user > 0) /* still someone using device */
|
|
return 0;
|
|
saawrite(0x007f0000, SAA7146_MC1); /* stop all overlay dma */
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations saa_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = saa_open,
|
|
.release = saa_release,
|
|
.ioctl = saa_ioctl,
|
|
.compat_ioctl = v4l_compat_ioctl32,
|
|
.read = saa_read,
|
|
.llseek = no_llseek,
|
|
.write = saa_write,
|
|
.mmap = saa_mmap,
|
|
};
|
|
|
|
/* template for video_device-structure */
|
|
static struct video_device saa_template = {
|
|
.name = "SAA7146A",
|
|
.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY,
|
|
.hardware = VID_HARDWARE_SAA7146,
|
|
.fops = &saa_fops,
|
|
.minor = -1,
|
|
};
|
|
|
|
static int __devinit configure_saa7146(struct pci_dev *pdev, int num)
|
|
{
|
|
int retval;
|
|
struct saa7146 *saa = pci_get_drvdata(pdev);
|
|
|
|
saa->endmarkhead = saa->endmarktail = 0;
|
|
saa->win.x = saa->win.y = 0;
|
|
saa->win.width = saa->win.cropwidth = 720;
|
|
saa->win.height = saa->win.cropheight = 480;
|
|
saa->win.cropx = saa->win.cropy = 0;
|
|
saa->win.bpp = 2;
|
|
saa->win.depth = 16;
|
|
saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565];
|
|
saa->win.bpl = 1024 * saa->win.bpp;
|
|
saa->win.swidth = 1024;
|
|
saa->win.sheight = 768;
|
|
saa->picture.brightness = 32768;
|
|
saa->picture.contrast = 38768;
|
|
saa->picture.colour = 32768;
|
|
saa->cap = 0;
|
|
saa->nr = num;
|
|
saa->playmode = VID_PLAY_NORMAL;
|
|
memset(saa->boardcfg, 0, 64); /* clear board config area */
|
|
saa->saa7146_mem = NULL;
|
|
saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in =
|
|
saa->dmaa1out = saa->dmaa2in = saa->dmaa2out =
|
|
saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in =
|
|
saa->pagea1out = saa->pagea2in = saa->pagea2out =
|
|
saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 =
|
|
saa->pageRPS2 = NULL;
|
|
saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL;
|
|
saa->audhead = saa->vidtail = 0;
|
|
|
|
init_waitqueue_head(&saa->i2cq);
|
|
init_waitqueue_head(&saa->audq);
|
|
init_waitqueue_head(&saa->debiq);
|
|
init_waitqueue_head(&saa->vidq);
|
|
spin_lock_init(&saa->lock);
|
|
|
|
retval = pci_enable_device(pdev);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%d: pci_enable_device failed!\n", num);
|
|
goto err;
|
|
}
|
|
|
|
saa->id = pdev->device;
|
|
saa->irq = pdev->irq;
|
|
saa->video_dev.minor = -1;
|
|
saa->saa7146_adr = pci_resource_start(pdev, 0);
|
|
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &saa->revision);
|
|
|
|
saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200);
|
|
if (saa->saa7146_mem == NULL) {
|
|
dev_err(&pdev->dev, "%d: ioremap failed!\n", num);
|
|
retval = -EIO;
|
|
goto err;
|
|
}
|
|
|
|
memcpy(&saa->video_dev, &saa_template, sizeof(saa_template));
|
|
saawrite(0, SAA7146_IER); /* turn off all interrupts */
|
|
|
|
retval = request_irq(saa->irq, saa7146_irq, IRQF_SHARED | IRQF_DISABLED,
|
|
"stradis", saa);
|
|
if (retval == -EINVAL)
|
|
dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num);
|
|
else if (retval == -EBUSY)
|
|
dev_err(&pdev->dev, "%d: IRQ %ld busy, change your PnP config "
|
|
"in BIOS\n", num, saa->irq);
|
|
if (retval < 0)
|
|
goto errio;
|
|
|
|
pci_set_master(pdev);
|
|
retval = video_register_device(&saa->video_dev, VFL_TYPE_GRABBER,
|
|
video_nr);
|
|
if (retval < 0) {
|
|
dev_err(&pdev->dev, "%d: error in registering video device!\n",
|
|
num);
|
|
goto errio;
|
|
}
|
|
|
|
return 0;
|
|
errio:
|
|
iounmap(saa->saa7146_mem);
|
|
err:
|
|
return retval;
|
|
}
|
|
|
|
static int __devinit init_saa7146(struct pci_dev *pdev)
|
|
{
|
|
struct saa7146 *saa = pci_get_drvdata(pdev);
|
|
|
|
saa->user = 0;
|
|
/* reset the saa7146 */
|
|
saawrite(0xffff0000, SAA7146_MC1);
|
|
mdelay(5);
|
|
/* enable debi and i2c transfers and pins */
|
|
saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C |
|
|
SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1);
|
|
/* ensure proper state of chip */
|
|
saawrite(0x00000000, SAA7146_PAGE1);
|
|
saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1);
|
|
saawrite(0x00000000, SAA7146_PAGE2);
|
|
saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2);
|
|
saawrite(0x00000000, SAA7146_DD1_INIT);
|
|
saawrite(0x00000000, SAA7146_DD1_STREAM_B);
|
|
saawrite(0x00000000, SAA7146_DD1_STREAM_A);
|
|
saawrite(0x00000000, SAA7146_BRS_CTRL);
|
|
saawrite(0x80400040, SAA7146_BCS_CTRL);
|
|
saawrite(0x0000e000 /*| (1<<29) */ , SAA7146_HPS_CTRL);
|
|
saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL);
|
|
saawrite(0x00000000, SAA7146_ACON1);
|
|
saawrite(0x00000000, SAA7146_ACON2);
|
|
saawrite(0x00000600, SAA7146_I2C_STATUS);
|
|
saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A |
|
|
SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H |
|
|
SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 |
|
|
SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff,
|
|
SAA7146_MC2);
|
|
/* setup arbitration control registers */
|
|
saawrite(0x1412121a, SAA7146_PCI_BT_V1);
|
|
|
|
/* allocate 32k dma buffer + 4k for page table */
|
|
if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) {
|
|
dev_err(&pdev->dev, "%d: debi kmalloc failed\n", saa->nr);
|
|
goto err;
|
|
}
|
|
#if 0
|
|
saa->pagedebi = saa->dmadebi + 32768; /* top 4k is for mmu */
|
|
saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE);
|
|
for (i = 0; i < 12; i++) /* setup mmu page table */
|
|
saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096));
|
|
#endif
|
|
saa->audhead = saa->vidhead = saa->osdhead = 0;
|
|
saa->audtail = saa->vidtail = saa->osdtail = 0;
|
|
if (saa->vidbuf == NULL && (saa->vidbuf = vmalloc(524288)) == NULL) {
|
|
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
|
|
goto err;
|
|
}
|
|
if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
|
|
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
|
|
goto errfree;
|
|
}
|
|
if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
|
|
dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
|
|
goto errfree;
|
|
}
|
|
/* allocate 81920 byte buffer for clipping */
|
|
if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
|
|
dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
|
|
goto errfree;
|
|
}
|
|
/* setup clipping registers */
|
|
saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
|
|
saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2);
|
|
saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE,
|
|
SAA7146_PROT_ADDR2);
|
|
saawrite(256, SAA7146_PITCH2);
|
|
saawrite(4, SAA7146_PAGE2); /* dma direction: read, no byteswap */
|
|
saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2,
|
|
SAA7146_MC2);
|
|
I2CBusScan(saa);
|
|
|
|
return 0;
|
|
errfree:
|
|
vfree(saa->osdbuf);
|
|
vfree(saa->audbuf);
|
|
vfree(saa->vidbuf);
|
|
saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
|
|
err:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void stradis_release_saa(struct pci_dev *pdev)
|
|
{
|
|
u8 command;
|
|
struct saa7146 *saa = pci_get_drvdata(pdev);
|
|
|
|
/* turn off all capturing, DMA and IRQs */
|
|
saawrite(0xffff0000, SAA7146_MC1); /* reset chip */
|
|
saawrite(0, SAA7146_MC2);
|
|
saawrite(0, SAA7146_IER);
|
|
saawrite(0xffffffffUL, SAA7146_ISR);
|
|
|
|
/* disable PCI bus-mastering */
|
|
pci_read_config_byte(pdev, PCI_COMMAND, &command);
|
|
command &= ~PCI_COMMAND_MASTER;
|
|
pci_write_config_byte(pdev, PCI_COMMAND, command);
|
|
|
|
/* unmap and free memory */
|
|
saa->audhead = saa->audtail = saa->osdhead = 0;
|
|
saa->vidhead = saa->vidtail = saa->osdtail = 0;
|
|
vfree(saa->vidbuf);
|
|
vfree(saa->audbuf);
|
|
vfree(saa->osdbuf);
|
|
kfree(saa->dmavid2);
|
|
saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
|
|
saa->dmavid2 = NULL;
|
|
kfree(saa->dmadebi);
|
|
kfree(saa->dmavid1);
|
|
kfree(saa->dmavid3);
|
|
kfree(saa->dmaa1in);
|
|
kfree(saa->dmaa1out);
|
|
kfree(saa->dmaa2in);
|
|
kfree(saa->dmaa2out);
|
|
kfree(saa->dmaRPS1);
|
|
kfree(saa->dmaRPS2);
|
|
free_irq(saa->irq, saa);
|
|
if (saa->saa7146_mem)
|
|
iounmap(saa->saa7146_mem);
|
|
if (saa->video_dev.minor != -1)
|
|
video_unregister_device(&saa->video_dev);
|
|
}
|
|
|
|
static int __devinit stradis_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int retval = -EINVAL;
|
|
|
|
if (saa_num >= SAA7146_MAX)
|
|
goto err;
|
|
|
|
if (!pdev->subsystem_vendor)
|
|
dev_info(&pdev->dev, "%d: rev1 decoder\n", saa_num);
|
|
else
|
|
dev_info(&pdev->dev, "%d: SDM2xx found\n", saa_num);
|
|
|
|
pci_set_drvdata(pdev, &saa7146s[saa_num]);
|
|
|
|
retval = configure_saa7146(pdev, saa_num);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%d: error in configuring\n", saa_num);
|
|
goto err;
|
|
}
|
|
|
|
if (init_saa7146(pdev) < 0) {
|
|
dev_err(&pdev->dev, "%d: error in initialization\n", saa_num);
|
|
retval = -EIO;
|
|
goto errrel;
|
|
}
|
|
|
|
saa_num++;
|
|
|
|
return 0;
|
|
errrel:
|
|
stradis_release_saa(pdev);
|
|
err:
|
|
return retval;
|
|
}
|
|
|
|
static void __devexit stradis_remove(struct pci_dev *pdev)
|
|
{
|
|
stradis_release_saa(pdev);
|
|
}
|
|
|
|
static struct pci_device_id stradis_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146) },
|
|
{ 0 }
|
|
};
|
|
|
|
|
|
static struct pci_driver stradis_driver = {
|
|
.name = "stradis",
|
|
.id_table = stradis_pci_tbl,
|
|
.probe = stradis_probe,
|
|
.remove = __devexit_p(stradis_remove)
|
|
};
|
|
|
|
static int __init stradis_init(void)
|
|
{
|
|
int retval;
|
|
|
|
saa_num = 0;
|
|
|
|
retval = pci_register_driver(&stradis_driver);
|
|
if (retval)
|
|
printk(KERN_ERR "stradis: Unable to register pci driver.\n");
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void __exit stradis_exit(void)
|
|
{
|
|
pci_unregister_driver(&stradis_driver);
|
|
printk(KERN_INFO "stradis: module cleanup complete\n");
|
|
}
|
|
|
|
module_init(stradis_init);
|
|
module_exit(stradis_exit);
|