OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/powerpc/boot
History
Josh Boyer 60e417536b [POWERPC] Pass per-file CFLAGs for platform specific op codes 
As a result of compiling all of the wrapper files for every platform
now, the kernel build can fail for toolchains that don't support various
op codes by default.  An example of this building a 7xx platform with
the ELD4.0 toolchain, is below:

/tmp/ccYjhJoL.s: Assembler messages:
/tmp/ccYjhJoL.s:42: Error: Unrecognized opcode: `mtdcr'
/tmp/ccYjhJoL.s:43: Error: Unrecognized opcode: `mfdcr'
make[1]: *** [arch/powerpc/boot/44x.o] Error 1

The following patch introduces additional CFLAGS for the 4xx specific
files and fixes the kernel compile.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
 		2007-05-17 21:11:19 +10:00
..
dts [POWERPC] Small fixes for the Ebony device tree 2007-05-17 21:11:14 +10:00
.gitignore [POWERPC] bootwrapper: Add a cuboot platform and a cuImage target 2007-04-24 21:31:54 +10:00
44x.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
44x.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
Makefile [POWERPC] Pass per-file CFLAGs for platform specific op codes 2007-05-17 21:11:19 +10:00
README powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addRamDisk.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addnote.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
crt0.S [POWERPC] bootwrapper: missing relocation in crt0.S 2007-04-13 03:55:16 +10:00
cuboot-83xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-85xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
dcr.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
devtree.c [POWERPC] Add dt_xlate_addr() to bootwrapper 2007-04-30 11:02:05 +10:00
div64.S powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
dummy.c powerpc/32: Generate miboot images with ARCH=powerpc 2006-01-15 13:00:08 +11:00
ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
elf.h [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
elf_util.c [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
flatdevtree.c [POWERPC] Fix bug adding properties with flatdevtree.c's ft_set_prop() 2007-05-17 21:11:13 +10:00
flatdevtree.h [POWERPC] bootwrapper: Make ft_create_node() pay attention to the parent parameter. 2007-03-16 15:49:15 +11:00
flatdevtree_env.h [POWERPC] Add flatdevtree source 2006-10-23 12:49:18 +10:00
flatdevtree_misc.c [POWERPC] bootwrapper: Add dt_ops methods. 2007-03-21 22:35:21 +11:00
gunzip_util.c [POWERPC] boot: More verbose gunzip error message 2007-04-27 21:13:49 +10:00
gunzip_util.h [POWERPC] Add documentation for the zImage's gunzip convenience functions 2007-03-16 16:38:19 +11:00
hack-coff.c powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
holly.c [POWERPC] Holly bootwrapper 2007-05-08 11:54:21 +10:00
install.sh [PATCH] powerpc: trivial: modify comments to refer to new location of files 2006-02-10 16:53:51 +11:00
io.h [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
main.c [POWERPC] bootwrapper: Decompress less, check more 2007-04-13 03:55:17 +10:00
mktree.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
mpsc.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
mv64x60.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60.h [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60_i2c.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C 2007-05-12 11:32:49 +10:00
ns16550.c [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers. 2007-04-13 03:55:15 +10:00
of.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
ops.h [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
page.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppc_asm.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppcboot.h [POWERPC] bootwrapper: Add ppcboot.h 2007-04-24 21:31:55 +10:00
prpmc2800.c [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
reg.h [POWERPC] New reg.h for the zImage 2007-03-26 15:11:20 +10:00
rs6000.h powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
serial.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
simple_alloc.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
stdio.c [POWERPC] More bootwrapper reorganization 2006-10-18 15:50:18 +10:00
stdio.h [POWERPC] Add gcc format warnings to zImage printf() 2007-03-26 15:11:20 +10:00
string.S powerpc: Avoid unaligned loads and stores in boot memcpy code 2006-01-14 15:06:51 +11:00
string.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
treeboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
types.h [POWERPC] Start arch/powerpc/boot code reorganization 2006-09-20 15:09:58 +10:00
util.S [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
wrapper [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
zImage.coff.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter