..
Kconfig
libata: Use glob_match from lib/glob.c
2014-08-06 18:01:25 -07:00
Makefile
ata: Add support for the Tegra124 SATA controller
2014-07-18 17:52:33 -04:00
acard-ahci.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci.c
ahci: add pcid for Marvel 0x9182 controller
2014-09-06 02:52:41 +09:00
ahci.h
ata: libahci: allow to use multiple PHYs
2014-07-30 15:39:46 -04:00
ahci_da850.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci_imx.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci_mvebu.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci_platform.c
ata: ahci_platform: add a generic AHCI compatible
2014-07-30 15:39:46 -04:00
ahci_st.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci_sunxi.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
ahci_tegra.c
ata: ahci_tegra: Read calibration fuse
2014-08-26 10:48:27 -04:00
ahci_xgene.c
ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
2014-09-06 11:27:15 +09:00
ata_generic.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ata_piix.c
ata_piix: Add Device IDs for Intel 9 Series PCH
2014-08-28 08:53:40 -04:00
libahci.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
libahci_platform.c
ata: libahci: Silence compiler warning on 64-bit
2014-08-01 11:18:53 -04:00
libata-acpi.c
…
libata-core.c
libata: widen Crucial M550 blacklist matching
2014-08-18 17:40:09 -04:00
libata-eh.c
libata: EH should handle AMNF error condition as a media error
2014-07-15 11:13:57 -04:00
libata-pmp.c
…
libata-scsi.c
scsi: use 64-bit LUNs
2014-07-17 22:07:37 +02:00
libata-sff.c
libata-sff: remove dead code
2014-05-04 15:01:42 -04:00
libata-transport.c
…
libata-transport.h
…
libata-zpodd.c
…
libata.h
scsi: use 64-bit LUNs
2014-07-17 22:07:37 +02:00
pata_acpi.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ali.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_amd.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_arasan_cf.c
pata_arasan_cf: fix ata_host_activate() failure handling
2014-04-14 13:50:03 -04:00
pata_artop.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_at32.c
…
pata_at91.c
pata_at91: fix ata_host_activate() failure handling
2014-04-02 13:17:31 -04:00
pata_atiixp.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_atp867x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_bf54x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd64x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd640.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5520.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5530.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5535.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5536.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cypress.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_efar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ep93xx.c
drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()
2014-07-17 08:36:13 -04:00
pata_hpt3x2n.c
…
pata_hpt3x3.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_hpt37x.c
…
pata_hpt366.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_icside.c
…
pata_imx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_isapnp.c
…
pata_it821x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_it8213.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
…
pata_jmicron.c
ata: Disabling the async PM for JMicron chip 363/361
2014-09-01 08:38:06 -04:00
pata_legacy.c
…
pata_macio.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_marvell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpc52xx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_netcell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ninja32.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87410.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87415.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_octeon_cf.c
pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-04-14 13:33:28 -04:00
pata_of_platform.c
…
pata_oldpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_opti.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_optidma.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_palmld.c
…
pata_pcmcia.c
…
pata_pdc202xx_old.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_pdc2027x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_piccolo.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_platform.c
…
pata_pxa.c
…
pata_radisys.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
…
pata_rdc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rz1000.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_samsung_cf.c
pata_samsung_cf: change ret type to signed
2014-08-17 07:24:48 -04:00
pata_sc1200.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_scc.c
pata_scc: propagate return value of scc_wait_after_reset
2014-08-18 09:15:21 -04:00
pata_sch.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_serverworks.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sil680.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sl82c105.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_triflex.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pdc_adma.c
…
sata_dwc_460ex.c
…
sata_fsl.c
ata: Use dma_zalloc_coherent
2014-06-17 10:23:26 -04:00
sata_highbank.c
ata: libahci_platform: move port_map parameters into the AHCI structure
2014-07-30 15:39:46 -04:00
sata_inic162x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_mv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_nv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_promise.c
…
sata_promise.h
…
sata_qstor.c
…
sata_rcar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil24.c
sata_sil24: Identify which card suffered IRQ status error
2014-07-22 10:08:31 -04:00
sata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_svw.c
…
sata_sx4.c
…
sata_uli.c
…
sata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_vsc.c
…
sis.h
…