6b3ad9432a
commit 017fcdc30c
upstream.
This patch corrects iATU programming for cfg1, io and mem viewport. Enable
ATU only after configuring it.
Signed-off-by: Mohit Kumar <mohit.kumar@st.com>
Signed-off-by: Ajay Khandelwal <ajay.khandelwal@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
834 lines
22 KiB
C
834 lines
22 KiB
C
/*
|
|
* Synopsys Designware PCIe host controller driver
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_regs.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
/* Synopsis specific PCIE configuration registers */
|
|
#define PCIE_PORT_LINK_CONTROL 0x710
|
|
#define PORT_LINK_MODE_MASK (0x3f << 16)
|
|
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
|
|
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
|
|
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
|
|
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
|
|
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
|
|
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
|
|
|
|
#define PCIE_MSI_ADDR_LO 0x820
|
|
#define PCIE_MSI_ADDR_HI 0x824
|
|
#define PCIE_MSI_INTR0_ENABLE 0x828
|
|
#define PCIE_MSI_INTR0_MASK 0x82C
|
|
#define PCIE_MSI_INTR0_STATUS 0x830
|
|
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
static struct hw_pci dw_pci;
|
|
|
|
static unsigned long global_io_offset;
|
|
|
|
static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
|
|
{
|
|
return sys->private_data;
|
|
}
|
|
|
|
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
|
|
{
|
|
*val = readl(addr);
|
|
|
|
if (size == 1)
|
|
*val = (*val >> (8 * (where & 3))) & 0xff;
|
|
else if (size == 2)
|
|
*val = (*val >> (8 * (where & 3))) & 0xffff;
|
|
else if (size != 4)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val)
|
|
{
|
|
if (size == 4)
|
|
writel(val, addr);
|
|
else if (size == 2)
|
|
writew(val, addr + (where & 2));
|
|
else if (size == 1)
|
|
writeb(val, addr + (where & 3));
|
|
else
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val)
|
|
{
|
|
if (pp->ops->readl_rc)
|
|
pp->ops->readl_rc(pp, pp->dbi_base + reg, val);
|
|
else
|
|
*val = readl(pp->dbi_base + reg);
|
|
}
|
|
|
|
static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
|
|
{
|
|
if (pp->ops->writel_rc)
|
|
pp->ops->writel_rc(pp, val, pp->dbi_base + reg);
|
|
else
|
|
writel(val, pp->dbi_base + reg);
|
|
}
|
|
|
|
static int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
|
|
u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
if (pp->ops->rd_own_conf)
|
|
ret = pp->ops->rd_own_conf(pp, where, size, val);
|
|
else
|
|
ret = dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
|
|
size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
|
|
u32 val)
|
|
{
|
|
int ret;
|
|
|
|
if (pp->ops->wr_own_conf)
|
|
ret = pp->ops->wr_own_conf(pp, where, size, val);
|
|
else
|
|
ret = dw_pcie_cfg_write(pp->dbi_base + (where & ~0x3), where,
|
|
size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct irq_chip dw_msi_irq_chip = {
|
|
.name = "PCI-MSI",
|
|
.irq_enable = unmask_msi_irq,
|
|
.irq_disable = mask_msi_irq,
|
|
.irq_mask = mask_msi_irq,
|
|
.irq_unmask = unmask_msi_irq,
|
|
};
|
|
|
|
/* MSI int handler */
|
|
void dw_handle_msi_irq(struct pcie_port *pp)
|
|
{
|
|
unsigned long val;
|
|
int i, pos, irq;
|
|
|
|
for (i = 0; i < MAX_MSI_CTRLS; i++) {
|
|
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
|
|
(u32 *)&val);
|
|
if (val) {
|
|
pos = 0;
|
|
while ((pos = find_next_bit(&val, 32, pos)) != 32) {
|
|
irq = irq_find_mapping(pp->irq_domain,
|
|
i * 32 + pos);
|
|
dw_pcie_wr_own_conf(pp,
|
|
PCIE_MSI_INTR0_STATUS + i * 12,
|
|
4, 1 << pos);
|
|
generic_handle_irq(irq);
|
|
pos++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void dw_pcie_msi_init(struct pcie_port *pp)
|
|
{
|
|
pp->msi_data = __get_free_pages(GFP_KERNEL, 0);
|
|
|
|
/* program the msi_data */
|
|
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
|
|
virt_to_phys((void *)pp->msi_data));
|
|
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
|
|
}
|
|
|
|
static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
|
|
{
|
|
int flag = 1;
|
|
|
|
do {
|
|
pos = find_next_zero_bit(pp->msi_irq_in_use,
|
|
MAX_MSI_IRQS, pos);
|
|
/*if you have reached to the end then get out from here.*/
|
|
if (pos == MAX_MSI_IRQS)
|
|
return -ENOSPC;
|
|
/*
|
|
* Check if this position is at correct offset.nvec is always a
|
|
* power of two. pos0 must be nvec bit aligned.
|
|
*/
|
|
if (pos % msgvec)
|
|
pos += msgvec - (pos % msgvec);
|
|
else
|
|
flag = 0;
|
|
} while (flag);
|
|
|
|
*pos0 = pos;
|
|
return 0;
|
|
}
|
|
|
|
static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
|
|
unsigned int nvec, unsigned int pos)
|
|
{
|
|
unsigned int i, res, bit, val;
|
|
|
|
for (i = 0; i < nvec; i++) {
|
|
irq_set_msi_desc_off(irq_base, i, NULL);
|
|
clear_bit(pos + i, pp->msi_irq_in_use);
|
|
/* Disable corresponding interrupt on MSI controller */
|
|
res = ((pos + i) / 32) * 12;
|
|
bit = (pos + i) % 32;
|
|
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
|
|
val &= ~(1 << bit);
|
|
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
|
|
}
|
|
}
|
|
|
|
static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
|
|
{
|
|
int res, bit, irq, pos0, pos1, i;
|
|
u32 val;
|
|
struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
|
|
|
|
if (!pp) {
|
|
BUG();
|
|
return -EINVAL;
|
|
}
|
|
|
|
pos0 = find_first_zero_bit(pp->msi_irq_in_use,
|
|
MAX_MSI_IRQS);
|
|
if (pos0 % no_irqs) {
|
|
if (find_valid_pos0(pp, no_irqs, pos0, &pos0))
|
|
goto no_valid_irq;
|
|
}
|
|
if (no_irqs > 1) {
|
|
pos1 = find_next_bit(pp->msi_irq_in_use,
|
|
MAX_MSI_IRQS, pos0);
|
|
/* there must be nvec number of consecutive free bits */
|
|
while ((pos1 - pos0) < no_irqs) {
|
|
if (find_valid_pos0(pp, no_irqs, pos1, &pos0))
|
|
goto no_valid_irq;
|
|
pos1 = find_next_bit(pp->msi_irq_in_use,
|
|
MAX_MSI_IRQS, pos0);
|
|
}
|
|
}
|
|
|
|
irq = irq_find_mapping(pp->irq_domain, pos0);
|
|
if (!irq)
|
|
goto no_valid_irq;
|
|
|
|
/*
|
|
* irq_create_mapping (called from dw_pcie_host_init) pre-allocates
|
|
* descs so there is no need to allocate descs here. We can therefore
|
|
* assume that if irq_find_mapping above returns non-zero, then the
|
|
* descs are also successfully allocated.
|
|
*/
|
|
|
|
for (i = 0; i < no_irqs; i++) {
|
|
if (irq_set_msi_desc_off(irq, i, desc) != 0) {
|
|
clear_irq_range(pp, irq, i, pos0);
|
|
goto no_valid_irq;
|
|
}
|
|
set_bit(pos0 + i, pp->msi_irq_in_use);
|
|
/*Enable corresponding interrupt in MSI interrupt controller */
|
|
res = ((pos0 + i) / 32) * 12;
|
|
bit = (pos0 + i) % 32;
|
|
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
|
|
val |= 1 << bit;
|
|
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
|
|
}
|
|
|
|
*pos = pos0;
|
|
return irq;
|
|
|
|
no_valid_irq:
|
|
*pos = pos0;
|
|
return -ENOSPC;
|
|
}
|
|
|
|
static void clear_irq(unsigned int irq)
|
|
{
|
|
unsigned int pos, nvec;
|
|
struct irq_desc *desc;
|
|
struct msi_desc *msi;
|
|
struct pcie_port *pp;
|
|
struct irq_data *data = irq_get_irq_data(irq);
|
|
|
|
/* get the port structure */
|
|
desc = irq_to_desc(irq);
|
|
msi = irq_desc_get_msi_desc(desc);
|
|
pp = sys_to_pcie(msi->dev->bus->sysdata);
|
|
if (!pp) {
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
/* undo what was done in assign_irq */
|
|
pos = data->hwirq;
|
|
nvec = 1 << msi->msi_attrib.multiple;
|
|
|
|
clear_irq_range(pp, irq, nvec, pos);
|
|
|
|
/* all irqs cleared; reset attributes */
|
|
msi->irq = 0;
|
|
msi->msi_attrib.multiple = 0;
|
|
}
|
|
|
|
static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
|
|
struct msi_desc *desc)
|
|
{
|
|
int irq, pos, msgvec;
|
|
u16 msg_ctr;
|
|
struct msi_msg msg;
|
|
struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata);
|
|
|
|
if (!pp) {
|
|
BUG();
|
|
return -EINVAL;
|
|
}
|
|
|
|
pci_read_config_word(pdev, desc->msi_attrib.pos+PCI_MSI_FLAGS,
|
|
&msg_ctr);
|
|
msgvec = (msg_ctr&PCI_MSI_FLAGS_QSIZE) >> 4;
|
|
if (msgvec == 0)
|
|
msgvec = (msg_ctr & PCI_MSI_FLAGS_QMASK) >> 1;
|
|
if (msgvec > 5)
|
|
msgvec = 0;
|
|
|
|
irq = assign_irq((1 << msgvec), desc, &pos);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
/*
|
|
* write_msi_msg() will update PCI_MSI_FLAGS so there is
|
|
* no need to explicitly call pci_write_config_word().
|
|
*/
|
|
desc->msi_attrib.multiple = msgvec;
|
|
|
|
msg.address_lo = virt_to_phys((void *)pp->msi_data);
|
|
msg.address_hi = 0x0;
|
|
msg.data = pos;
|
|
write_msi_msg(irq, &msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
|
|
{
|
|
clear_irq(irq);
|
|
}
|
|
|
|
static struct msi_chip dw_pcie_msi_chip = {
|
|
.setup_irq = dw_msi_setup_irq,
|
|
.teardown_irq = dw_msi_teardown_irq,
|
|
};
|
|
|
|
int dw_pcie_link_up(struct pcie_port *pp)
|
|
{
|
|
if (pp->ops->link_up)
|
|
return pp->ops->link_up(pp);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_simple_irq);
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops msi_domain_ops = {
|
|
.map = dw_pcie_msi_map,
|
|
};
|
|
|
|
int __init dw_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct device_node *np = pp->dev->of_node;
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
u32 val;
|
|
int i;
|
|
|
|
if (of_pci_range_parser_init(&parser, np)) {
|
|
dev_err(pp->dev, "missing ranges property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the I/O and memory ranges from DT */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
|
|
if (restype == IORESOURCE_IO) {
|
|
of_pci_range_to_resource(&range, np, &pp->io);
|
|
pp->io.name = "I/O";
|
|
pp->io.start = max_t(resource_size_t,
|
|
PCIBIOS_MIN_IO,
|
|
range.pci_addr + global_io_offset);
|
|
pp->io.end = min_t(resource_size_t,
|
|
IO_SPACE_LIMIT,
|
|
range.pci_addr + range.size
|
|
+ global_io_offset);
|
|
pp->config.io_size = resource_size(&pp->io);
|
|
pp->config.io_bus_addr = range.pci_addr;
|
|
pp->io_base = range.cpu_addr;
|
|
}
|
|
if (restype == IORESOURCE_MEM) {
|
|
of_pci_range_to_resource(&range, np, &pp->mem);
|
|
pp->mem.name = "MEM";
|
|
pp->config.mem_size = resource_size(&pp->mem);
|
|
pp->config.mem_bus_addr = range.pci_addr;
|
|
}
|
|
if (restype == 0) {
|
|
of_pci_range_to_resource(&range, np, &pp->cfg);
|
|
pp->config.cfg0_size = resource_size(&pp->cfg)/2;
|
|
pp->config.cfg1_size = resource_size(&pp->cfg)/2;
|
|
}
|
|
}
|
|
|
|
if (!pp->dbi_base) {
|
|
pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start,
|
|
resource_size(&pp->cfg));
|
|
if (!pp->dbi_base) {
|
|
dev_err(pp->dev, "error with ioremap\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
pp->cfg0_base = pp->cfg.start;
|
|
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
|
|
pp->mem_base = pp->mem.start;
|
|
|
|
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
|
|
pp->config.cfg0_size);
|
|
if (!pp->va_cfg0_base) {
|
|
dev_err(pp->dev, "error with ioremap in function\n");
|
|
return -ENOMEM;
|
|
}
|
|
pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
|
|
pp->config.cfg1_size);
|
|
if (!pp->va_cfg1_base) {
|
|
dev_err(pp->dev, "error with ioremap\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "num-lanes", &pp->lanes)) {
|
|
dev_err(pp->dev, "Failed to parse the number of lanes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
|
|
MAX_MSI_IRQS, &msi_domain_ops,
|
|
&dw_pcie_msi_chip);
|
|
if (!pp->irq_domain) {
|
|
dev_err(pp->dev, "irq domain init failed\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
for (i = 0; i < MAX_MSI_IRQS; i++)
|
|
irq_create_mapping(pp->irq_domain, i);
|
|
}
|
|
|
|
if (pp->ops->host_init)
|
|
pp->ops->host_init(pp);
|
|
|
|
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
|
|
|
|
/* program correct class for RC */
|
|
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
|
|
|
|
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
|
|
val |= PORT_LOGIC_SPEED_CHANGE;
|
|
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
|
|
|
|
dw_pci.nr_controllers = 1;
|
|
dw_pci.private_data = (void **)&pp;
|
|
|
|
pci_common_init(&dw_pci);
|
|
pci_assign_unassigned_resources();
|
|
#ifdef CONFIG_PCI_DOMAINS
|
|
dw_pci.domain++;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
|
|
{
|
|
/* Program viewport 0 : OUTBOUND : CFG0 */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
|
|
{
|
|
/* Program viewport 1 : OUTBOUND : CFG1 */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
|
|
{
|
|
/* Program viewport 0 : OUTBOUND : MEM */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
|
|
PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
|
|
{
|
|
/* Program viewport 1 : OUTBOUND : IO */
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_VIEWPORT);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
|
|
dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
|
|
dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
|
|
PCIE_ATU_LIMIT);
|
|
dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
|
|
PCIE_ATU_UPPER_TARGET);
|
|
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
}
|
|
|
|
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 *val)
|
|
{
|
|
int ret = PCIBIOS_SUCCESSFUL;
|
|
u32 address, busdev;
|
|
|
|
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
|
address = where & ~0x3;
|
|
|
|
if (bus->parent->number == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 val)
|
|
{
|
|
int ret = PCIBIOS_SUCCESSFUL;
|
|
u32 address, busdev;
|
|
|
|
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
|
address = where & ~0x3;
|
|
|
|
if (bus->parent->number == pp->root_bus_nr) {
|
|
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_mem_outbound(pp);
|
|
} else {
|
|
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size,
|
|
val);
|
|
dw_pcie_prog_viewport_io_outbound(pp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_valid_config(struct pcie_port *pp,
|
|
struct pci_bus *bus, int dev)
|
|
{
|
|
/* If there is no link, then there is no device */
|
|
if (bus->number != pp->root_bus_nr) {
|
|
if (!dw_pcie_link_up(pp))
|
|
return 0;
|
|
}
|
|
|
|
/* access only one slot on each root port */
|
|
if (bus->number == pp->root_bus_nr && dev > 0)
|
|
return 0;
|
|
|
|
/*
|
|
* do not read more than one device on the bus directly attached
|
|
* to RC's (Virtual Bridge's) DS side.
|
|
*/
|
|
if (bus->primary == pp->root_bus_nr && dev > 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!pp) {
|
|
BUG();
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
spin_lock_irqsave(&pp->conf_lock, flags);
|
|
if (bus->number != pp->root_bus_nr)
|
|
ret = dw_pcie_rd_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_rd_own_conf(pp, where, size, val);
|
|
spin_unlock_irqrestore(&pp->conf_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!pp) {
|
|
BUG();
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
spin_lock_irqsave(&pp->conf_lock, flags);
|
|
if (bus->number != pp->root_bus_nr)
|
|
ret = dw_pcie_wr_other_conf(pp, bus, devfn,
|
|
where, size, val);
|
|
else
|
|
ret = dw_pcie_wr_own_conf(pp, where, size, val);
|
|
spin_unlock_irqrestore(&pp->conf_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct pci_ops dw_pcie_ops = {
|
|
.read = dw_pcie_rd_conf,
|
|
.write = dw_pcie_wr_conf,
|
|
};
|
|
|
|
static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct pcie_port *pp;
|
|
|
|
pp = sys_to_pcie(sys);
|
|
|
|
if (!pp)
|
|
return 0;
|
|
|
|
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
|
|
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
|
|
pci_ioremap_io(global_io_offset, pp->io_base);
|
|
global_io_offset += SZ_64K;
|
|
pci_add_resource_offset(&sys->resources, &pp->io,
|
|
sys->io_offset);
|
|
}
|
|
|
|
sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr;
|
|
pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct pci_bus *bus;
|
|
struct pcie_port *pp = sys_to_pcie(sys);
|
|
|
|
if (pp) {
|
|
pp->root_bus_nr = sys->busnr;
|
|
bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
|
|
sys, &sys->resources);
|
|
} else {
|
|
bus = NULL;
|
|
BUG();
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
|
|
|
|
return pp->irq;
|
|
}
|
|
|
|
static void dw_pcie_add_bus(struct pci_bus *bus)
|
|
{
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
|
|
|
|
dw_pcie_msi_chip.dev = pp->dev;
|
|
bus->msi = &dw_pcie_msi_chip;
|
|
}
|
|
}
|
|
|
|
static struct hw_pci dw_pci = {
|
|
.setup = dw_pcie_setup,
|
|
.scan = dw_pcie_scan_bus,
|
|
.map_irq = dw_pcie_map_irq,
|
|
.add_bus = dw_pcie_add_bus,
|
|
};
|
|
|
|
void dw_pcie_setup_rc(struct pcie_port *pp)
|
|
{
|
|
struct pcie_port_info *config = &pp->config;
|
|
u32 val;
|
|
u32 membase;
|
|
u32 memlimit;
|
|
|
|
/* set the number of lines as 4 */
|
|
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
|
|
val &= ~PORT_LINK_MODE_MASK;
|
|
switch (pp->lanes) {
|
|
case 1:
|
|
val |= PORT_LINK_MODE_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LINK_MODE_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LINK_MODE_4_LANES;
|
|
break;
|
|
}
|
|
dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL);
|
|
|
|
/* set link width speed control register */
|
|
dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
|
|
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
|
|
switch (pp->lanes) {
|
|
case 1:
|
|
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
|
|
break;
|
|
case 2:
|
|
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
|
|
break;
|
|
case 4:
|
|
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
|
|
break;
|
|
}
|
|
dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
|
|
/* setup RC BARs */
|
|
dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0);
|
|
dw_pcie_writel_rc(pp, 0x00000000, PCI_BASE_ADDRESS_1);
|
|
|
|
/* setup interrupt pins */
|
|
dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val);
|
|
val &= 0xffff00ff;
|
|
val |= 0x00000100;
|
|
dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE);
|
|
|
|
/* setup bus numbers */
|
|
dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val);
|
|
val &= 0xff000000;
|
|
val |= 0x00010100;
|
|
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
|
|
|
|
/* setup memory base, memory limit */
|
|
membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
|
|
memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000;
|
|
val = memlimit | membase;
|
|
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
|
|
|
|
/* setup command register */
|
|
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
|
|
val &= 0xffff0000;
|
|
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
|
|
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
|
|
MODULE_DESCRIPTION("Designware PCIe host controller driver");
|
|
MODULE_LICENSE("GPL v2");
|