linux/arch/powerpc/boot/dts/bsc9131rdb.dtsi

143 lines
3.7 KiB
Plaintext

/*
* BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_ifc {
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x4000>;
partition@0 {
/* This location must not be altered */
/* 3MB for u-boot Bootloader Image */
reg = <0x0 0x00300000>;
label = "NAND U-Boot Image";
read-only;
};
partition@300000 {
/* 1MB for DTB Image */
reg = <0x00300000 0x00100000>;
label = "NAND DTB Image";
};
partition@400000 {
/* 8MB for Linux Kernel Image */
reg = <0x00400000 0x00800000>;
label = "NAND Linux Kernel Image";
};
partition@c00000 {
/* Rest space for Root file System Image */
reg = <0x00c00000 0x07400000>;
label = "NAND RFS Image";
};
};
};
&board_soc {
/* BSC9131RDB does not have any device on i2c@3100 */
i2c@3100 {
status = "disabled";
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
/* 512KB for u-boot Bootloader Image */
partition@0 {
reg = <0x0 0x00080000>;
label = "SPI Flash U-Boot Image";
read-only;
};
/* 512KB for DTB Image */
partition@80000 {
reg = <0x00080000 0x00080000>;
label = "SPI Flash DTB Image";
};
/* 4MB for Linux Kernel Image */
partition@100000 {
reg = <0x00100000 0x00400000>;
label = "SPI Flash Kernel Image";
};
/*11MB for RFS Image */
partition@500000 {
reg = <0x00500000 0x00B00000>;
label = "SPI Flash RFS Image";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x3>;
};
};
sdhc@2e000 {
status = "disabled";
};
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};