16c1020362
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
1917 lines
52 KiB
Plaintext
1917 lines
52 KiB
Plaintext
config ARM
|
|
bool
|
|
default y
|
|
select HAVE_AOUT
|
|
select HAVE_DMA_API_DEBUG
|
|
select HAVE_IDE
|
|
select HAVE_MEMBLOCK
|
|
select RTC_LIB
|
|
select SYS_SUPPORTS_APM_EMULATION
|
|
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
|
|
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
|
|
select HAVE_ARCH_KGDB
|
|
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
|
|
select HAVE_KRETPROBES if (HAVE_KPROBES)
|
|
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
|
|
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
|
|
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
|
|
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
|
|
select HAVE_GENERIC_DMA_COHERENT
|
|
select HAVE_KERNEL_GZIP
|
|
select HAVE_KERNEL_LZO
|
|
select HAVE_KERNEL_LZMA
|
|
select HAVE_IRQ_WORK
|
|
select HAVE_PERF_EVENTS
|
|
select PERF_USE_VMALLOC
|
|
select HAVE_REGS_AND_STACK_ACCESS_API
|
|
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
|
|
select HAVE_C_RECORDMCOUNT
|
|
select HAVE_GENERIC_HARDIRQS
|
|
select HAVE_SPARSE_IRQ
|
|
help
|
|
The ARM series is a line of low-power-consumption RISC chip designs
|
|
licensed by ARM Ltd and targeted at embedded applications and
|
|
handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
|
|
manufactured, but legacy ARM-based PC hardware remains popular in
|
|
Europe. There is an ARM Linux project with a web page at
|
|
<http://www.arm.linux.org.uk/>.
|
|
|
|
config HAVE_PWM
|
|
bool
|
|
|
|
config MIGHT_HAVE_PCI
|
|
bool
|
|
|
|
config SYS_SUPPORTS_APM_EMULATION
|
|
bool
|
|
|
|
config HAVE_SCHED_CLOCK
|
|
bool
|
|
|
|
config GENERIC_GPIO
|
|
bool
|
|
|
|
config ARCH_USES_GETTIMEOFFSET
|
|
bool
|
|
default n
|
|
|
|
config GENERIC_CLOCKEVENTS
|
|
bool
|
|
|
|
config GENERIC_CLOCKEVENTS_BROADCAST
|
|
bool
|
|
depends on GENERIC_CLOCKEVENTS
|
|
default y if SMP
|
|
|
|
config HAVE_TCM
|
|
bool
|
|
select GENERIC_ALLOCATOR
|
|
|
|
config HAVE_PROC_CPU
|
|
bool
|
|
|
|
config NO_IOPORT
|
|
bool
|
|
|
|
config EISA
|
|
bool
|
|
---help---
|
|
The Extended Industry Standard Architecture (EISA) bus was
|
|
developed as an open alternative to the IBM MicroChannel bus.
|
|
|
|
The EISA bus provided some of the features of the IBM MicroChannel
|
|
bus while maintaining backward compatibility with cards made for
|
|
the older ISA bus. The EISA bus saw limited use between 1988 and
|
|
1995 when it was made obsolete by the PCI bus.
|
|
|
|
Say Y here if you are building a kernel for an EISA-based machine.
|
|
|
|
Otherwise, say N.
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
config MCA
|
|
bool
|
|
help
|
|
MicroChannel Architecture is found in some IBM PS/2 machines and
|
|
laptops. It is a bus system similar to PCI or ISA. See
|
|
<file:Documentation/mca.txt> (and especially the web page given
|
|
there) before attempting to build an MCA bus kernel.
|
|
|
|
config STACKTRACE_SUPPORT
|
|
bool
|
|
default y
|
|
|
|
config HAVE_LATENCYTOP_SUPPORT
|
|
bool
|
|
depends on !SMP
|
|
default y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
bool
|
|
default y
|
|
|
|
config TRACE_IRQFLAGS_SUPPORT
|
|
bool
|
|
default y
|
|
|
|
config HARDIRQS_SW_RESEND
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_LOCKBREAK
|
|
bool
|
|
default y
|
|
depends on SMP && PREEMPT
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
|
|
config ARCH_HAS_ILOG2_U32
|
|
bool
|
|
|
|
config ARCH_HAS_ILOG2_U64
|
|
bool
|
|
|
|
config ARCH_HAS_CPUFREQ
|
|
bool
|
|
help
|
|
Internal node to signify that the ARCH has CPUFREQ support
|
|
and that the relevant menu configurations are displayed for
|
|
it.
|
|
|
|
config ARCH_HAS_CPU_IDLE_WAIT
|
|
def_bool y
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
bool
|
|
|
|
config ZONE_DMA
|
|
bool
|
|
|
|
config NEED_DMA_MAP_STATE
|
|
def_bool y
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
|
|
config FIQ
|
|
bool
|
|
|
|
config ARCH_MTD_XIP
|
|
bool
|
|
|
|
config ARM_L1_CACHE_SHIFT_6
|
|
bool
|
|
help
|
|
Setting ARM L1 cache line size to 64 Bytes.
|
|
|
|
config VECTORS_BASE
|
|
hex
|
|
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
|
|
default DRAM_BASE if REMAP_VECTORS_TO_RAM
|
|
default 0x00000000
|
|
help
|
|
The base address of exception vectors.
|
|
|
|
source "init/Kconfig"
|
|
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "System Type"
|
|
|
|
config MMU
|
|
bool "MMU-based Paged Memory Management Support"
|
|
default y
|
|
help
|
|
Select if you want MMU-based virtualised addressing space
|
|
support by paged memory management. If unsure, say 'Y'.
|
|
|
|
#
|
|
# The "ARM system type" choice list is ordered alphabetically by option
|
|
# text. Please add new entries in the option alphabetic order.
|
|
#
|
|
choice
|
|
prompt "ARM system type"
|
|
default ARCH_VERSATILE
|
|
|
|
config ARCH_AAEC2000
|
|
bool "Agilent AAEC-2000 based"
|
|
select CPU_ARM920T
|
|
select ARM_AMBA
|
|
select HAVE_CLK
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
This enables support for systems based on the Agilent AAEC-2000
|
|
|
|
config ARCH_INTEGRATOR
|
|
bool "ARM Ltd. Integrator family"
|
|
select ARM_AMBA
|
|
select ARCH_HAS_CPUFREQ
|
|
select CLKDEV_LOOKUP
|
|
select ICST
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_VERSATILE
|
|
help
|
|
Support for ARM's Integrator platform.
|
|
|
|
config ARCH_REALVIEW
|
|
bool "ARM Ltd. RealView family"
|
|
select ARM_AMBA
|
|
select CLKDEV_LOOKUP
|
|
select HAVE_SCHED_CLOCK
|
|
select ICST
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
select PLAT_VERSATILE
|
|
select ARM_TIMER_SP804
|
|
select GPIO_PL061 if GPIOLIB
|
|
help
|
|
This enables support for ARM Ltd RealView boards.
|
|
|
|
config ARCH_VERSATILE
|
|
bool "ARM Ltd. Versatile family"
|
|
select ARM_AMBA
|
|
select ARM_VIC
|
|
select CLKDEV_LOOKUP
|
|
select HAVE_SCHED_CLOCK
|
|
select ICST
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
select PLAT_VERSATILE
|
|
select ARM_TIMER_SP804
|
|
help
|
|
This enables support for ARM Ltd Versatile board.
|
|
|
|
config ARCH_VEXPRESS
|
|
bool "ARM Ltd. Versatile Express family"
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
select ARM_AMBA
|
|
select ARM_TIMER_SP804
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_CLK
|
|
select HAVE_SCHED_CLOCK
|
|
select ICST
|
|
select PLAT_VERSATILE
|
|
help
|
|
This enables support for the ARM Ltd Versatile Express boards.
|
|
|
|
config ARCH_AT91
|
|
bool "Atmel AT91"
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select HAVE_CLK
|
|
help
|
|
This enables support for systems based on the Atmel AT91RM9200,
|
|
AT91SAM9 and AT91CAP9 processors.
|
|
|
|
config ARCH_BCMRING
|
|
bool "Broadcom BCMRING"
|
|
depends on MMU
|
|
select CPU_V6
|
|
select ARM_AMBA
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
help
|
|
Support for Broadcom's BCMRing platform.
|
|
|
|
config ARCH_CLPS711X
|
|
bool "Cirrus Logic CLPS711x/EP721x-based"
|
|
select CPU_ARM720T
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for Cirrus Logic 711x/721x based boards.
|
|
|
|
config ARCH_CNS3XXX
|
|
bool "Cavium Networks CNS3XXX family"
|
|
select CPU_V6
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARM_GIC
|
|
select MIGHT_HAVE_PCI
|
|
select PCI_DOMAINS if PCI
|
|
help
|
|
Support for Cavium Networks CNS3XXX platform.
|
|
|
|
config ARCH_GEMINI
|
|
bool "Cortina Systems Gemini"
|
|
select CPU_FA526
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for the Cortina Systems Gemini family SoCs
|
|
|
|
config ARCH_EBSA110
|
|
bool "EBSA-110"
|
|
select CPU_SA110
|
|
select ISA
|
|
select NO_IOPORT
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
This is an evaluation board for the StrongARM processor available
|
|
from Digital. It has limited hardware on-board, including an
|
|
Ethernet interface, two PCMCIA sockets, two serial ports and a
|
|
parallel port.
|
|
|
|
config ARCH_EP93XX
|
|
bool "EP93xx-based"
|
|
select CPU_ARM920T
|
|
select ARM_AMBA
|
|
select ARM_VIC
|
|
select CLKDEV_LOOKUP
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARCH_HAS_HOLES_MEMORYMODEL
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
This enables support for the Cirrus EP93xx series of CPUs.
|
|
|
|
config ARCH_FOOTBRIDGE
|
|
bool "FootBridge"
|
|
select CPU_SA110
|
|
select FOOTBRIDGE
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for systems based on the DC21285 companion chip
|
|
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
|
|
|
|
config ARCH_MXC
|
|
bool "Freescale MXC/iMX-based"
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select CLKDEV_LOOKUP
|
|
help
|
|
Support for Freescale MXC/iMX-based family of processors
|
|
|
|
config ARCH_MXS
|
|
bool "Freescale MXS-based"
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select CLKDEV_LOOKUP
|
|
help
|
|
Support for Freescale MXS-based family of processors
|
|
|
|
config ARCH_STMP3XXX
|
|
bool "Freescale STMP3xxx"
|
|
select CPU_ARM926T
|
|
select CLKDEV_LOOKUP
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select USB_ARCH_HAS_EHCI
|
|
help
|
|
Support for systems based on the Freescale 3xxx CPUs.
|
|
|
|
config ARCH_NETX
|
|
bool "Hilscher NetX based"
|
|
select CPU_ARM926T
|
|
select ARM_VIC
|
|
select GENERIC_CLOCKEVENTS
|
|
help
|
|
This enables support for systems based on the Hilscher NetX Soc
|
|
|
|
config ARCH_H720X
|
|
bool "Hynix HMS720x-based"
|
|
select CPU_ARM720T
|
|
select ISA_DMA_API
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
This enables support for systems based on the Hynix HMS720x
|
|
|
|
config ARCH_IOP13XX
|
|
bool "IOP13xx-based"
|
|
depends on MMU
|
|
select CPU_XSC3
|
|
select PLAT_IOP
|
|
select PCI
|
|
select ARCH_SUPPORTS_MSI
|
|
select VMSPLIT_1G
|
|
help
|
|
Support for Intel's IOP13XX (XScale) family of processors.
|
|
|
|
config ARCH_IOP32X
|
|
bool "IOP32x-based"
|
|
depends on MMU
|
|
select CPU_XSCALE
|
|
select PLAT_IOP
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for Intel's 80219 and IOP32X (XScale) family of
|
|
processors.
|
|
|
|
config ARCH_IOP33X
|
|
bool "IOP33x-based"
|
|
depends on MMU
|
|
select CPU_XSCALE
|
|
select PLAT_IOP
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for Intel's IOP33X (XScale) family of processors.
|
|
|
|
config ARCH_IXP23XX
|
|
bool "IXP23XX-based"
|
|
depends on MMU
|
|
select CPU_XSC3
|
|
select PCI
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for Intel's IXP23xx (XScale) family of processors.
|
|
|
|
config ARCH_IXP2000
|
|
bool "IXP2400/2800-based"
|
|
depends on MMU
|
|
select CPU_XSCALE
|
|
select PCI
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for Intel's IXP2400/2800 (XScale) family of processors.
|
|
|
|
config ARCH_IXP4XX
|
|
bool "IXP4xx-based"
|
|
depends on MMU
|
|
select CPU_XSCALE
|
|
select GENERIC_GPIO
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_SCHED_CLOCK
|
|
select MIGHT_HAVE_PCI
|
|
select DMABOUNCE if PCI
|
|
help
|
|
Support for Intel's IXP4XX (XScale) family of processors.
|
|
|
|
config ARCH_DOVE
|
|
bool "Marvell Dove"
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_ORION
|
|
help
|
|
Support for the Marvell Dove SoC 88AP510
|
|
|
|
config ARCH_KIRKWOOD
|
|
bool "Marvell Kirkwood"
|
|
select CPU_FEROCEON
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_ORION
|
|
help
|
|
Support for the following Marvell Kirkwood series SoCs:
|
|
88F6180, 88F6192 and 88F6281.
|
|
|
|
config ARCH_LOKI
|
|
bool "Marvell Loki (88RC8480)"
|
|
select CPU_FEROCEON
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_ORION
|
|
help
|
|
Support for the Marvell Loki (88RC8480) SoC.
|
|
|
|
config ARCH_LPC32XX
|
|
bool "NXP LPC32XX"
|
|
select CPU_ARM926T
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select HAVE_IDE
|
|
select ARM_AMBA
|
|
select USB_ARCH_HAS_OHCI
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_TIME
|
|
select GENERIC_CLOCKEVENTS
|
|
help
|
|
Support for the NXP LPC32XX family of processors
|
|
|
|
config ARCH_MV78XX0
|
|
bool "Marvell MV78xx0"
|
|
select CPU_FEROCEON
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_ORION
|
|
help
|
|
Support for the following Marvell MV78xx0 series SoCs:
|
|
MV781x0, MV782x0.
|
|
|
|
config ARCH_ORION5X
|
|
bool "Marvell Orion"
|
|
depends on MMU
|
|
select CPU_FEROCEON
|
|
select PCI
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select PLAT_ORION
|
|
help
|
|
Support for the following Marvell Orion 5x series SoCs:
|
|
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
|
|
Orion-2 (5281), Orion-1-90 (6183).
|
|
|
|
config ARCH_MMP
|
|
bool "Marvell PXA168/910/MMP2"
|
|
depends on MMU
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_SCHED_CLOCK
|
|
select TICK_ONESHOT
|
|
select PLAT_PXA
|
|
select SPARSE_IRQ
|
|
help
|
|
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
|
|
|
|
config ARCH_KS8695
|
|
bool "Micrel/Kendin KS8695"
|
|
select CPU_ARM922T
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
|
|
System-on-Chip devices.
|
|
|
|
config ARCH_NS9XXX
|
|
bool "NetSilicon NS9xxx"
|
|
select CPU_ARM926T
|
|
select GENERIC_GPIO
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_CLK
|
|
help
|
|
Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
|
|
System.
|
|
|
|
<http://www.digi.com/products/microprocessors/index.jsp>
|
|
|
|
config ARCH_W90X900
|
|
bool "Nuvoton W90X900 CPU"
|
|
select CPU_ARM926T
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
help
|
|
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
|
|
At present, the w90x900 has been renamed nuc900, regarding
|
|
the ARM series product line, you can login the following
|
|
link address to know more.
|
|
|
|
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
|
|
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
|
|
|
|
config ARCH_NUC93X
|
|
bool "Nuvoton NUC93X CPU"
|
|
select CPU_ARM926T
|
|
select CLKDEV_LOOKUP
|
|
help
|
|
Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
|
|
low-power and high performance MPEG-4/JPEG multimedia controller chip.
|
|
|
|
config ARCH_TEGRA
|
|
bool "NVIDIA Tegra"
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_TIME
|
|
select GENERIC_CLOCKEVENTS
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select HAVE_SCHED_CLOCK
|
|
select ARCH_HAS_BARRIERS if CACHE_L2X0
|
|
select ARCH_HAS_CPUFREQ
|
|
help
|
|
This enables support for NVIDIA Tegra based systems (Tegra APX,
|
|
Tegra 6xx and Tegra 2 series).
|
|
|
|
config ARCH_PNX4008
|
|
bool "Philips Nexperia PNX4008 Mobile"
|
|
select CPU_ARM926T
|
|
select CLKDEV_LOOKUP
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
This enables support for Philips PNX4008 mobile platform.
|
|
|
|
config ARCH_PXA
|
|
bool "PXA2xx/PXA3xx-based"
|
|
depends on MMU
|
|
select ARCH_MTD_XIP
|
|
select ARCH_HAS_CPUFREQ
|
|
select CLKDEV_LOOKUP
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_SCHED_CLOCK
|
|
select TICK_ONESHOT
|
|
select PLAT_PXA
|
|
select SPARSE_IRQ
|
|
help
|
|
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
|
|
|
|
config ARCH_MSM
|
|
bool "Qualcomm MSM"
|
|
select HAVE_CLK
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for Qualcomm MSM/QSD based systems. This runs on the
|
|
apps processor of the MSM/QSD and depends on a shared memory
|
|
interface to the modem processor which runs the baseband
|
|
stack and controls some vital subsystems
|
|
(clock and power control, etc).
|
|
|
|
config ARCH_SHMOBILE
|
|
bool "Renesas SH-Mobile / R-Mobile"
|
|
select HAVE_CLK
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select NO_IOPORT
|
|
select SPARSE_IRQ
|
|
select MULTI_IRQ_HANDLER
|
|
help
|
|
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
|
|
|
|
config ARCH_RPC
|
|
bool "RiscPC"
|
|
select ARCH_ACORN
|
|
select FIQ
|
|
select TIMER_ACORN
|
|
select ARCH_MAY_HAVE_PC_FDC
|
|
select HAVE_PATA_PLATFORM
|
|
select ISA_DMA_API
|
|
select NO_IOPORT
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
On the Acorn Risc-PC, Linux can support the internal IDE disk and
|
|
CD-ROM interface, serial and parallel port, and the floppy drive.
|
|
|
|
config ARCH_SA1100
|
|
bool "SA1100-based"
|
|
select CPU_SA1100
|
|
select ISA
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select ARCH_MTD_XIP
|
|
select ARCH_HAS_CPUFREQ
|
|
select CPU_FREQ
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_CLK
|
|
select HAVE_SCHED_CLOCK
|
|
select TICK_ONESHOT
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for StrongARM 11x0 based boards.
|
|
|
|
config ARCH_S3C2410
|
|
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
|
|
select GENERIC_GPIO
|
|
select ARCH_HAS_CPUFREQ
|
|
select HAVE_CLK
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select HAVE_S3C2410_I2C if I2C
|
|
help
|
|
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
|
|
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
|
|
the Samsung SMDK2410 development board (and derivatives).
|
|
|
|
Note, the S3C2416 and the S3C2450 are so close that they even share
|
|
the same SoC ID code. This means that there is no seperate machine
|
|
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
|
|
|
|
config ARCH_S3C64XX
|
|
bool "Samsung S3C64XX"
|
|
select PLAT_SAMSUNG
|
|
select CPU_V6
|
|
select ARM_VIC
|
|
select HAVE_CLK
|
|
select NO_IOPORT
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select SAMSUNG_CLKSRC
|
|
select SAMSUNG_IRQ_VIC_TIMER
|
|
select SAMSUNG_IRQ_UART
|
|
select S3C_GPIO_TRACK
|
|
select S3C_GPIO_PULL_UPDOWN
|
|
select S3C_GPIO_CFG_S3C24XX
|
|
select S3C_GPIO_CFG_S3C64XX
|
|
select S3C_DEV_NAND
|
|
select USB_ARCH_HAS_OHCI
|
|
select SAMSUNG_GPIOLIB_4BIT
|
|
select HAVE_S3C2410_I2C if I2C
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
help
|
|
Samsung S3C64XX series based systems
|
|
|
|
config ARCH_S5P64X0
|
|
bool "Samsung S5P6440 S5P6450"
|
|
select CPU_V6
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select HAVE_S3C2410_I2C if I2C
|
|
select HAVE_S3C_RTC if RTC_CLASS
|
|
help
|
|
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
|
|
SMDK6450.
|
|
|
|
config ARCH_S5P6442
|
|
bool "Samsung S5P6442"
|
|
select CPU_V6
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
help
|
|
Samsung S5P6442 CPU based systems
|
|
|
|
config ARCH_S5PC100
|
|
bool "Samsung S5PC100"
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select CPU_V7
|
|
select ARM_L1_CACHE_SHIFT_6
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select HAVE_S3C2410_I2C if I2C
|
|
select HAVE_S3C_RTC if RTC_CLASS
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
help
|
|
Samsung S5PC100 series based systems
|
|
|
|
config ARCH_S5PV210
|
|
bool "Samsung S5PV210/S5PC110"
|
|
select CPU_V7
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select ARM_L1_CACHE_SHIFT_6
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
select HAVE_S3C2410_I2C if I2C
|
|
select HAVE_S3C_RTC if RTC_CLASS
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
help
|
|
Samsung S5PV210/S5PC110 series based systems
|
|
|
|
config ARCH_S5PV310
|
|
bool "Samsung S5PV310/S5PC210"
|
|
select CPU_V7
|
|
select ARCH_SPARSEMEM_ENABLE
|
|
select GENERIC_GPIO
|
|
select HAVE_CLK
|
|
select ARCH_HAS_CPUFREQ
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_S3C_RTC if RTC_CLASS
|
|
select HAVE_S3C2410_I2C if I2C
|
|
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
|
help
|
|
Samsung S5PV310 series based systems
|
|
|
|
config ARCH_SHARK
|
|
bool "Shark"
|
|
select CPU_SA110
|
|
select ISA
|
|
select ISA_DMA
|
|
select ZONE_DMA
|
|
select PCI
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Support for the StrongARM based Digital DNARD machine, also known
|
|
as "Shark" (<http://www.shark-linux.de/shark.html>).
|
|
|
|
config ARCH_TCC_926
|
|
bool "Telechips TCC ARM926-based systems"
|
|
select CPU_ARM926T
|
|
select HAVE_CLK
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
help
|
|
Support for Telechips TCC ARM926-based systems.
|
|
|
|
config ARCH_LH7A40X
|
|
bool "Sharp LH7A40X"
|
|
select CPU_ARM922T
|
|
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
|
|
select ARCH_USES_GETTIMEOFFSET
|
|
help
|
|
Say Y here for systems based on one of the Sharp LH7A40X
|
|
System on a Chip processors. These CPUs include an ARM922T
|
|
core with a wide array of integrated devices for
|
|
hand-held and low-power applications.
|
|
|
|
config ARCH_U300
|
|
bool "ST-Ericsson U300 Series"
|
|
depends on MMU
|
|
select CPU_ARM926T
|
|
select HAVE_SCHED_CLOCK
|
|
select HAVE_TCM
|
|
select ARM_AMBA
|
|
select ARM_VIC
|
|
select GENERIC_CLOCKEVENTS
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_GPIO
|
|
help
|
|
Support for ST-Ericsson U300 series mobile platforms.
|
|
|
|
config ARCH_U8500
|
|
bool "ST-Ericsson U8500 Series"
|
|
select CPU_V7
|
|
select ARM_AMBA
|
|
select GENERIC_CLOCKEVENTS
|
|
select CLKDEV_LOOKUP
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARCH_HAS_CPUFREQ
|
|
help
|
|
Support for ST-Ericsson's Ux500 architecture
|
|
|
|
config ARCH_NOMADIK
|
|
bool "STMicroelectronics Nomadik"
|
|
select ARM_AMBA
|
|
select ARM_VIC
|
|
select CPU_ARM926T
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for the Nomadik platform by ST-Ericsson
|
|
|
|
config ARCH_DAVINCI
|
|
bool "TI DaVinci"
|
|
select GENERIC_CLOCKEVENTS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ZONE_DMA
|
|
select HAVE_IDE
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_ALLOCATOR
|
|
select ARCH_HAS_HOLES_MEMORYMODEL
|
|
help
|
|
Support for TI's DaVinci platform.
|
|
|
|
config ARCH_OMAP
|
|
bool "TI OMAP"
|
|
select HAVE_CLK
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARCH_HAS_CPUFREQ
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_SCHED_CLOCK
|
|
select ARCH_HAS_HOLES_MEMORYMODEL
|
|
help
|
|
Support for TI's OMAP platform (OMAP1/2/3/4).
|
|
|
|
config PLAT_SPEAR
|
|
bool "ST SPEAr"
|
|
select ARM_AMBA
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select CLKDEV_LOOKUP
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_CLK
|
|
help
|
|
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
|
|
|
|
endchoice
|
|
|
|
#
|
|
# This is sorted alphabetically by mach-* pathname. However, plat-*
|
|
# Kconfigs may be included either alphabetically (according to the
|
|
# plat- suffix) or along side the corresponding mach-* source.
|
|
#
|
|
source "arch/arm/mach-aaec2000/Kconfig"
|
|
|
|
source "arch/arm/mach-at91/Kconfig"
|
|
|
|
source "arch/arm/mach-bcmring/Kconfig"
|
|
|
|
source "arch/arm/mach-clps711x/Kconfig"
|
|
|
|
source "arch/arm/mach-cns3xxx/Kconfig"
|
|
|
|
source "arch/arm/mach-davinci/Kconfig"
|
|
|
|
source "arch/arm/mach-dove/Kconfig"
|
|
|
|
source "arch/arm/mach-ep93xx/Kconfig"
|
|
|
|
source "arch/arm/mach-footbridge/Kconfig"
|
|
|
|
source "arch/arm/mach-gemini/Kconfig"
|
|
|
|
source "arch/arm/mach-h720x/Kconfig"
|
|
|
|
source "arch/arm/mach-integrator/Kconfig"
|
|
|
|
source "arch/arm/mach-iop32x/Kconfig"
|
|
|
|
source "arch/arm/mach-iop33x/Kconfig"
|
|
|
|
source "arch/arm/mach-iop13xx/Kconfig"
|
|
|
|
source "arch/arm/mach-ixp4xx/Kconfig"
|
|
|
|
source "arch/arm/mach-ixp2000/Kconfig"
|
|
|
|
source "arch/arm/mach-ixp23xx/Kconfig"
|
|
|
|
source "arch/arm/mach-kirkwood/Kconfig"
|
|
|
|
source "arch/arm/mach-ks8695/Kconfig"
|
|
|
|
source "arch/arm/mach-lh7a40x/Kconfig"
|
|
|
|
source "arch/arm/mach-loki/Kconfig"
|
|
|
|
source "arch/arm/mach-lpc32xx/Kconfig"
|
|
|
|
source "arch/arm/mach-msm/Kconfig"
|
|
|
|
source "arch/arm/mach-mv78xx0/Kconfig"
|
|
|
|
source "arch/arm/plat-mxc/Kconfig"
|
|
|
|
source "arch/arm/mach-mxs/Kconfig"
|
|
|
|
source "arch/arm/mach-netx/Kconfig"
|
|
|
|
source "arch/arm/mach-nomadik/Kconfig"
|
|
source "arch/arm/plat-nomadik/Kconfig"
|
|
|
|
source "arch/arm/mach-ns9xxx/Kconfig"
|
|
|
|
source "arch/arm/mach-nuc93x/Kconfig"
|
|
|
|
source "arch/arm/plat-omap/Kconfig"
|
|
|
|
source "arch/arm/mach-omap1/Kconfig"
|
|
|
|
source "arch/arm/mach-omap2/Kconfig"
|
|
|
|
source "arch/arm/mach-orion5x/Kconfig"
|
|
|
|
source "arch/arm/mach-pxa/Kconfig"
|
|
source "arch/arm/plat-pxa/Kconfig"
|
|
|
|
source "arch/arm/mach-mmp/Kconfig"
|
|
|
|
source "arch/arm/mach-realview/Kconfig"
|
|
|
|
source "arch/arm/mach-sa1100/Kconfig"
|
|
|
|
source "arch/arm/plat-samsung/Kconfig"
|
|
source "arch/arm/plat-s3c24xx/Kconfig"
|
|
source "arch/arm/plat-s5p/Kconfig"
|
|
|
|
source "arch/arm/plat-spear/Kconfig"
|
|
|
|
source "arch/arm/plat-tcc/Kconfig"
|
|
|
|
if ARCH_S3C2410
|
|
source "arch/arm/mach-s3c2400/Kconfig"
|
|
source "arch/arm/mach-s3c2410/Kconfig"
|
|
source "arch/arm/mach-s3c2412/Kconfig"
|
|
source "arch/arm/mach-s3c2416/Kconfig"
|
|
source "arch/arm/mach-s3c2440/Kconfig"
|
|
source "arch/arm/mach-s3c2443/Kconfig"
|
|
endif
|
|
|
|
if ARCH_S3C64XX
|
|
source "arch/arm/mach-s3c64xx/Kconfig"
|
|
endif
|
|
|
|
source "arch/arm/mach-s5p64x0/Kconfig"
|
|
|
|
source "arch/arm/mach-s5p6442/Kconfig"
|
|
|
|
source "arch/arm/mach-s5pc100/Kconfig"
|
|
|
|
source "arch/arm/mach-s5pv210/Kconfig"
|
|
|
|
source "arch/arm/mach-s5pv310/Kconfig"
|
|
|
|
source "arch/arm/mach-shmobile/Kconfig"
|
|
|
|
source "arch/arm/plat-stmp3xxx/Kconfig"
|
|
|
|
source "arch/arm/mach-tegra/Kconfig"
|
|
|
|
source "arch/arm/mach-u300/Kconfig"
|
|
|
|
source "arch/arm/mach-ux500/Kconfig"
|
|
|
|
source "arch/arm/mach-versatile/Kconfig"
|
|
|
|
source "arch/arm/mach-vexpress/Kconfig"
|
|
|
|
source "arch/arm/mach-w90x900/Kconfig"
|
|
|
|
# Definitions to make life easier
|
|
config ARCH_ACORN
|
|
bool
|
|
|
|
config PLAT_IOP
|
|
bool
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_SCHED_CLOCK
|
|
|
|
config PLAT_ORION
|
|
bool
|
|
select HAVE_SCHED_CLOCK
|
|
|
|
config PLAT_PXA
|
|
bool
|
|
|
|
config PLAT_VERSATILE
|
|
bool
|
|
|
|
config ARM_TIMER_SP804
|
|
bool
|
|
|
|
source arch/arm/mm/Kconfig
|
|
|
|
config IWMMXT
|
|
bool "Enable iWMMXt support"
|
|
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
|
|
default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
|
|
help
|
|
Enable support for iWMMXt context switching at run time if
|
|
running on a CPU that supports it.
|
|
|
|
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
|
|
config XSCALE_PMU
|
|
bool
|
|
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
|
|
default y
|
|
|
|
config CPU_HAS_PMU
|
|
depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
|
|
(!ARCH_OMAP3 || OMAP3_EMU)
|
|
default y
|
|
bool
|
|
|
|
config MULTI_IRQ_HANDLER
|
|
bool
|
|
help
|
|
Allow each machine to specify it's own IRQ handler at run time.
|
|
|
|
if !MMU
|
|
source "arch/arm/Kconfig-nommu"
|
|
endif
|
|
|
|
config ARM_ERRATA_411920
|
|
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
|
|
depends on CPU_V6
|
|
help
|
|
Invalidation of the Instruction Cache operation can
|
|
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
|
|
It does not affect the MPCore. This option enables the ARM Ltd.
|
|
recommended workaround.
|
|
|
|
config ARM_ERRATA_430973
|
|
bool "ARM errata: Stale prediction on replaced interworking branch"
|
|
depends on CPU_V7
|
|
help
|
|
This option enables the workaround for the 430973 Cortex-A8
|
|
(r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
|
|
interworking branch is replaced with another code sequence at the
|
|
same virtual address, whether due to self-modifying code or virtual
|
|
to physical address re-mapping, Cortex-A8 does not recover from the
|
|
stale interworking branch prediction. This results in Cortex-A8
|
|
executing the new code sequence in the incorrect ARM or Thumb state.
|
|
The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
|
|
and also flushes the branch target cache at every context switch.
|
|
Note that setting specific bits in the ACTLR register may not be
|
|
available in non-secure mode.
|
|
|
|
config ARM_ERRATA_458693
|
|
bool "ARM errata: Processor deadlock when a false hazard is created"
|
|
depends on CPU_V7
|
|
help
|
|
This option enables the workaround for the 458693 Cortex-A8 (r2p0)
|
|
erratum. For very specific sequences of memory operations, it is
|
|
possible for a hazard condition intended for a cache line to instead
|
|
be incorrectly associated with a different cache line. This false
|
|
hazard might then cause a processor deadlock. The workaround enables
|
|
the L1 caching of the NEON accesses and disables the PLD instruction
|
|
in the ACTLR register. Note that setting specific bits in the ACTLR
|
|
register may not be available in non-secure mode.
|
|
|
|
config ARM_ERRATA_460075
|
|
bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
|
|
depends on CPU_V7
|
|
help
|
|
This option enables the workaround for the 460075 Cortex-A8 (r2p0)
|
|
erratum. Any asynchronous access to the L2 cache may encounter a
|
|
situation in which recent store transactions to the L2 cache are lost
|
|
and overwritten with stale memory contents from external memory. The
|
|
workaround disables the write-allocate mode for the L2 cache via the
|
|
ACTLR register. Note that setting specific bits in the ACTLR register
|
|
may not be available in non-secure mode.
|
|
|
|
config ARM_ERRATA_742230
|
|
bool "ARM errata: DMB operation may be faulty"
|
|
depends on CPU_V7 && SMP
|
|
help
|
|
This option enables the workaround for the 742230 Cortex-A9
|
|
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
|
|
between two write operations may not ensure the correct visibility
|
|
ordering of the two writes. This workaround sets a specific bit in
|
|
the diagnostic register of the Cortex-A9 which causes the DMB
|
|
instruction to behave as a DSB, ensuring the correct behaviour of
|
|
the two writes.
|
|
|
|
config ARM_ERRATA_742231
|
|
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
|
|
depends on CPU_V7 && SMP
|
|
help
|
|
This option enables the workaround for the 742231 Cortex-A9
|
|
(r2p0..r2p2) erratum. Under certain conditions, specific to the
|
|
Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
|
|
accessing some data located in the same cache line, may get corrupted
|
|
data due to bad handling of the address hazard when the line gets
|
|
replaced from one of the CPUs at the same time as another CPU is
|
|
accessing it. This workaround sets specific bits in the diagnostic
|
|
register of the Cortex-A9 which reduces the linefill issuing
|
|
capabilities of the processor.
|
|
|
|
config PL310_ERRATA_588369
|
|
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
|
|
depends on CACHE_L2X0 && ARCH_OMAP4
|
|
help
|
|
The PL310 L2 cache controller implements three types of Clean &
|
|
Invalidate maintenance operations: by Physical Address
|
|
(offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
|
|
They are architecturally defined to behave as the execution of a
|
|
clean operation followed immediately by an invalidate operation,
|
|
both performing to the same memory location. This functionality
|
|
is not correctly implemented in PL310 as clean lines are not
|
|
invalidated as a result of these operations. Note that this errata
|
|
uses Texas Instrument's secure monitor api.
|
|
|
|
config ARM_ERRATA_720789
|
|
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
|
|
depends on CPU_V7 && SMP
|
|
help
|
|
This option enables the workaround for the 720789 Cortex-A9 (prior to
|
|
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
|
|
broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
|
|
As a consequence of this erratum, some TLB entries which should be
|
|
invalidated are not, resulting in an incoherency in the system page
|
|
tables. The workaround changes the TLB flushing routines to invalidate
|
|
entries regardless of the ASID.
|
|
|
|
config ARM_ERRATA_743622
|
|
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
|
|
depends on CPU_V7
|
|
help
|
|
This option enables the workaround for the 743622 Cortex-A9
|
|
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
|
|
optimisation in the Cortex-A9 Store Buffer may lead to data
|
|
corruption. This workaround sets a specific bit in the diagnostic
|
|
register of the Cortex-A9 which disables the Store Buffer
|
|
optimisation, preventing the defect from occurring. This has no
|
|
visible impact on the overall performance or power consumption of the
|
|
processor.
|
|
|
|
endmenu
|
|
|
|
source "arch/arm/common/Kconfig"
|
|
|
|
menu "Bus support"
|
|
|
|
config ARM_AMBA
|
|
bool
|
|
|
|
config ISA
|
|
bool
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. Other bus systems are PCI, EISA, MicroChannel
|
|
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
|
|
newer boards don't support it. If you have ISA, say Y, otherwise N.
|
|
|
|
# Select ISA DMA controller support
|
|
config ISA_DMA
|
|
bool
|
|
select ISA_DMA_API
|
|
|
|
# Select ISA DMA interface
|
|
config ISA_DMA_API
|
|
bool
|
|
|
|
config PCI
|
|
bool "PCI support" if MIGHT_HAVE_PCI
|
|
help
|
|
Find out whether you have a PCI motherboard. PCI is the name of a
|
|
bus system, i.e. the way the CPU talks to the other stuff inside
|
|
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
|
|
VESA. If you have PCI, say Y, otherwise N.
|
|
|
|
config PCI_DOMAINS
|
|
bool
|
|
depends on PCI
|
|
|
|
config PCI_NANOENGINE
|
|
bool "BSE nanoEngine PCI support"
|
|
depends on SA1100_NANOENGINE
|
|
help
|
|
Enable PCI on the BSE nanoEngine board.
|
|
|
|
config PCI_SYSCALL
|
|
def_bool PCI
|
|
|
|
# Select the host bridge type
|
|
config PCI_HOST_VIA82C505
|
|
bool
|
|
depends on PCI && ARCH_SHARK
|
|
default y
|
|
|
|
config PCI_HOST_ITE8152
|
|
bool
|
|
depends on PCI && MACH_ARMCORE
|
|
default y
|
|
select DMABOUNCE
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Kernel Features"
|
|
|
|
source "kernel/time/Kconfig"
|
|
|
|
config SMP
|
|
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
depends on GENERIC_CLOCKEVENTS
|
|
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
|
|
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
|
|
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
|
|
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
|
|
select USE_GENERIC_SMP_HELPERS
|
|
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
|
|
help
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, like most personal computers, say N. If
|
|
you have a system with more than one CPU, say Y.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on many, but not all, single
|
|
processor machines. On a single processor machine, the kernel will
|
|
run faster if you say N here.
|
|
|
|
See also <file:Documentation/i386/IO-APIC.txt>,
|
|
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
|
|
<http://tldp.org/HOWTO/SMP-HOWTO.html>.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config SMP_ON_UP
|
|
bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
depends on SMP && !XIP_KERNEL
|
|
default y
|
|
help
|
|
SMP kernels contain instructions which fail on non-SMP processors.
|
|
Enabling this option allows the kernel to modify itself to make
|
|
these instructions safe. Disabling it allows about 1K of space
|
|
savings.
|
|
|
|
If you don't know what to do here, say Y.
|
|
|
|
config HAVE_ARM_SCU
|
|
bool
|
|
depends on SMP
|
|
help
|
|
This option enables support for the ARM system coherency unit
|
|
|
|
config HAVE_ARM_TWD
|
|
bool
|
|
depends on SMP
|
|
select TICK_ONESHOT
|
|
help
|
|
This options enables support for the ARM timer and watchdog unit
|
|
|
|
choice
|
|
prompt "Memory split"
|
|
default VMSPLIT_3G
|
|
help
|
|
Select the desired split between kernel and user memory.
|
|
|
|
If you are not absolutely sure what you are doing, leave this
|
|
option alone!
|
|
|
|
config VMSPLIT_3G
|
|
bool "3G/1G user/kernel split"
|
|
config VMSPLIT_2G
|
|
bool "2G/2G user/kernel split"
|
|
config VMSPLIT_1G
|
|
bool "1G/3G user/kernel split"
|
|
endchoice
|
|
|
|
config PAGE_OFFSET
|
|
hex
|
|
default 0x40000000 if VMSPLIT_1G
|
|
default 0x80000000 if VMSPLIT_2G
|
|
default 0xC0000000
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-32)"
|
|
range 2 32
|
|
depends on SMP
|
|
default "4"
|
|
|
|
config HOTPLUG_CPU
|
|
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
|
|
depends on SMP && HOTPLUG && EXPERIMENTAL
|
|
depends on !ARCH_MSM
|
|
help
|
|
Say Y here to experiment with turning CPUs off and on. CPUs
|
|
can be controlled through /sys/devices/system/cpu.
|
|
|
|
config LOCAL_TIMERS
|
|
bool "Use local timer interrupts"
|
|
depends on SMP
|
|
default y
|
|
select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
|
|
help
|
|
Enable support for local timers on SMP platforms, rather then the
|
|
legacy IPI broadcast method. Local timers allows the system
|
|
accounting to be spread across the timer interval, preventing a
|
|
"thundering herd" at every timer tick.
|
|
|
|
source kernel/Kconfig.preempt
|
|
|
|
config HZ
|
|
int
|
|
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
|
|
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
|
|
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
|
|
default AT91_TIMER_HZ if ARCH_AT91
|
|
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
|
|
default 100
|
|
|
|
config THUMB2_KERNEL
|
|
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
|
|
depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
|
|
select AEABI
|
|
select ARM_ASM_UNIFIED
|
|
help
|
|
By enabling this option, the kernel will be compiled in
|
|
Thumb-2 mode. A compiler/assembler that understand the unified
|
|
ARM-Thumb syntax is needed.
|
|
|
|
If unsure, say N.
|
|
|
|
config ARM_ASM_UNIFIED
|
|
bool
|
|
|
|
config AEABI
|
|
bool "Use the ARM EABI to compile the kernel"
|
|
help
|
|
This option allows for the kernel to be compiled using the latest
|
|
ARM ABI (aka EABI). This is only useful if you are using a user
|
|
space environment that is also compiled with EABI.
|
|
|
|
Since there are major incompatibilities between the legacy ABI and
|
|
EABI, especially with regard to structure member alignment, this
|
|
option also changes the kernel syscall calling convention to
|
|
disambiguate both ABIs and allow for backward compatibility support
|
|
(selected with CONFIG_OABI_COMPAT).
|
|
|
|
To use this you need GCC version 4.0.0 or later.
|
|
|
|
config OABI_COMPAT
|
|
bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
|
|
depends on AEABI && EXPERIMENTAL
|
|
default y
|
|
help
|
|
This option preserves the old syscall interface along with the
|
|
new (ARM EABI) one. It also provides a compatibility layer to
|
|
intercept syscalls that have structure arguments which layout
|
|
in memory differs between the legacy ABI and the new ARM EABI
|
|
(only for non "thumb" binaries). This option adds a tiny
|
|
overhead to all syscalls and produces a slightly larger kernel.
|
|
If you know you'll be using only pure EABI user space then you
|
|
can say N here. If this option is not selected and you attempt
|
|
to execute a legacy ABI binary then the result will be
|
|
UNPREDICTABLE (in fact it can be predicted that it won't work
|
|
at all). If in doubt say Y.
|
|
|
|
config ARCH_HAS_HOLES_MEMORYMODEL
|
|
bool
|
|
|
|
config ARCH_SPARSEMEM_ENABLE
|
|
bool
|
|
|
|
config ARCH_SPARSEMEM_DEFAULT
|
|
def_bool ARCH_SPARSEMEM_ENABLE
|
|
|
|
config ARCH_SELECT_MEMORY_MODEL
|
|
def_bool ARCH_SPARSEMEM_ENABLE
|
|
|
|
config HIGHMEM
|
|
bool "High Memory Support (EXPERIMENTAL)"
|
|
depends on MMU && EXPERIMENTAL
|
|
help
|
|
The address space of ARM processors is only 4 Gigabytes large
|
|
and it has to accommodate user address space, kernel address
|
|
space as well as some memory mapped IO. That means that, if you
|
|
have a large amount of physical memory and/or IO, not all of the
|
|
memory can be "permanently mapped" by the kernel. The physical
|
|
memory that is not permanently mapped is called "high memory".
|
|
|
|
Depending on the selected kernel/user memory split, minimum
|
|
vmalloc space and actual amount of RAM, you may not need this
|
|
option which should result in a slightly faster kernel.
|
|
|
|
If unsure, say n.
|
|
|
|
config HIGHPTE
|
|
bool "Allocate 2nd-level pagetables from highmem"
|
|
depends on HIGHMEM
|
|
depends on !OUTER_CACHE
|
|
|
|
config HW_PERF_EVENTS
|
|
bool "Enable hardware performance counter support for perf events"
|
|
depends on PERF_EVENTS && CPU_HAS_PMU
|
|
default y
|
|
help
|
|
Enable hardware performance counter support for perf events. If
|
|
disabled, perf events will use software events only.
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config FORCE_MAX_ZONEORDER
|
|
int "Maximum zone order" if ARCH_SHMOBILE
|
|
range 11 64 if ARCH_SHMOBILE
|
|
default "9" if SA1111
|
|
default "11"
|
|
help
|
|
The kernel memory allocator divides physically contiguous memory
|
|
blocks into "zones", where each zone is a power of two number of
|
|
pages. This option selects the largest power of two that the kernel
|
|
keeps in the memory allocator. If you need to allocate very large
|
|
blocks of physically contiguous memory, then you may need to
|
|
increase this value.
|
|
|
|
This config option is actually maximum order plus one. For example,
|
|
a value of 11 means that the largest free memory block is 2^10 pages.
|
|
|
|
config LEDS
|
|
bool "Timer and CPU usage LEDs"
|
|
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
|
|
ARCH_EBSA285 || ARCH_INTEGRATOR || \
|
|
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
|
|
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
|
|
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
|
|
ARCH_AT91 || ARCH_DAVINCI || \
|
|
ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
|
|
help
|
|
If you say Y here, the LEDs on your machine will be used
|
|
to provide useful information about your current system status.
|
|
|
|
If you are compiling a kernel for a NetWinder or EBSA-285, you will
|
|
be able to select which LEDs are active using the options below. If
|
|
you are compiling a kernel for the EBSA-110 or the LART however, the
|
|
red LED will simply flash regularly to indicate that the system is
|
|
still functional. It is safe to say Y here if you have a CATS
|
|
system, but the driver will do nothing.
|
|
|
|
config LEDS_TIMER
|
|
bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
|
|
OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
|
|
|| MACH_OMAP_PERSEUS2
|
|
depends on LEDS
|
|
depends on !GENERIC_CLOCKEVENTS
|
|
default y if ARCH_EBSA110
|
|
help
|
|
If you say Y here, one of the system LEDs (the green one on the
|
|
NetWinder, the amber one on the EBSA285, or the red one on the LART)
|
|
will flash regularly to indicate that the system is still
|
|
operational. This is mainly useful to kernel hackers who are
|
|
debugging unstable kernels.
|
|
|
|
The LART uses the same LED for both Timer LED and CPU usage LED
|
|
functions. You may choose to use both, but the Timer LED function
|
|
will overrule the CPU usage LED.
|
|
|
|
config LEDS_CPU
|
|
bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
|
|
!ARCH_OMAP) \
|
|
|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
|
|
|| MACH_OMAP_PERSEUS2
|
|
depends on LEDS
|
|
help
|
|
If you say Y here, the red LED will be used to give a good real
|
|
time indication of CPU usage, by lighting whenever the idle task
|
|
is not currently executing.
|
|
|
|
The LART uses the same LED for both Timer LED and CPU usage LED
|
|
functions. You may choose to use both, but the Timer LED function
|
|
will overrule the CPU usage LED.
|
|
|
|
config ALIGNMENT_TRAP
|
|
bool
|
|
depends on CPU_CP15_MMU
|
|
default y if !ARCH_EBSA110
|
|
select HAVE_PROC_CPU if PROC_FS
|
|
help
|
|
ARM processors cannot fetch/store information which is not
|
|
naturally aligned on the bus, i.e., a 4 byte fetch must start at an
|
|
address divisible by 4. On 32-bit ARM processors, these non-aligned
|
|
fetch/store instructions will be emulated in software if you say
|
|
here, which has a severe performance impact. This is necessary for
|
|
correct operation of some network protocols. With an IP-only
|
|
configuration it is safe to say N, otherwise say Y.
|
|
|
|
config UACCESS_WITH_MEMCPY
|
|
bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
|
|
depends on MMU && EXPERIMENTAL
|
|
default y if CPU_FEROCEON
|
|
help
|
|
Implement faster copy_to_user and clear_user methods for CPU
|
|
cores where a 8-word STM instruction give significantly higher
|
|
memory write throughput than a sequence of individual 32bit stores.
|
|
|
|
A possible side effect is a slight increase in scheduling latency
|
|
between threads sharing the same address space if they invoke
|
|
such copy operations with large buffers.
|
|
|
|
However, if the CPU data cache is using a write-allocate mode,
|
|
this option is unlikely to provide any performance gain.
|
|
|
|
config SECCOMP
|
|
bool
|
|
prompt "Enable seccomp to safely compute untrusted bytecode"
|
|
---help---
|
|
This kernel feature is useful for number crunching applications
|
|
that may need to compute untrusted bytecode during their
|
|
execution. By using pipes or other transports made available to
|
|
the process as file descriptors supporting the read/write
|
|
syscalls, it's possible to isolate those applications in
|
|
their own address space using seccomp. Once seccomp is
|
|
enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
|
|
and the task is only allowed to execute a few safe syscalls
|
|
defined by each seccomp mode.
|
|
|
|
config CC_STACKPROTECTOR
|
|
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
This option turns on the -fstack-protector GCC feature. This
|
|
feature puts, at the beginning of functions, a canary value on
|
|
the stack just before the return address, and validates
|
|
the value just before actually returning. Stack based buffer
|
|
overflows (that need to overwrite this return address) now also
|
|
overwrite the canary, which gets detected and the attack is then
|
|
neutralized via a kernel panic.
|
|
This feature requires gcc version 4.2 or above.
|
|
|
|
config DEPRECATED_PARAM_STRUCT
|
|
bool "Provide old way to pass kernel parameters"
|
|
help
|
|
This was deprecated in 2001 and announced to live on for 5 years.
|
|
Some old boot loaders still use this way.
|
|
|
|
endmenu
|
|
|
|
menu "Boot options"
|
|
|
|
# Compressed boot loader in ROM. Yes, we really want to ask about
|
|
# TEXT and BSS so we preserve their values in the config files.
|
|
config ZBOOT_ROM_TEXT
|
|
hex "Compressed ROM boot loader base address"
|
|
default "0"
|
|
help
|
|
The physical address at which the ROM-able zImage is to be
|
|
placed in the target. Platforms which normally make use of
|
|
ROM-able zImage formats normally set this to a suitable
|
|
value in their defconfig file.
|
|
|
|
If ZBOOT_ROM is not enabled, this has no effect.
|
|
|
|
config ZBOOT_ROM_BSS
|
|
hex "Compressed ROM boot loader BSS address"
|
|
default "0"
|
|
help
|
|
The base address of an area of read/write memory in the target
|
|
for the ROM-able zImage which must be available while the
|
|
decompressor is running. It must be large enough to hold the
|
|
entire decompressed kernel plus an additional 128 KiB.
|
|
Platforms which normally make use of ROM-able zImage formats
|
|
normally set this to a suitable value in their defconfig file.
|
|
|
|
If ZBOOT_ROM is not enabled, this has no effect.
|
|
|
|
config ZBOOT_ROM
|
|
bool "Compressed boot loader in ROM/flash"
|
|
depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
|
|
help
|
|
Say Y here if you intend to execute your compressed kernel image
|
|
(zImage) directly from ROM or flash. If unsure, say N.
|
|
|
|
config CMDLINE
|
|
string "Default kernel command string"
|
|
default ""
|
|
help
|
|
On some architectures (EBSA110 and CATS), there is currently no way
|
|
for the boot loader to pass arguments to the kernel. For these
|
|
architectures, you should supply some command-line options at build
|
|
time by entering them here. As a minimum, you should specify the
|
|
memory size and the root device (e.g., mem=64M root=/dev/nfs).
|
|
|
|
config CMDLINE_FORCE
|
|
bool "Always use the default kernel command string"
|
|
depends on CMDLINE != ""
|
|
help
|
|
Always use the default kernel command string, even if the boot
|
|
loader passes other arguments to the kernel.
|
|
This is useful if you cannot or don't want to change the
|
|
command-line options your boot loader passes to the kernel.
|
|
|
|
If unsure, say N.
|
|
|
|
config XIP_KERNEL
|
|
bool "Kernel Execute-In-Place from ROM"
|
|
depends on !ZBOOT_ROM
|
|
help
|
|
Execute-In-Place allows the kernel to run from non-volatile storage
|
|
directly addressable by the CPU, such as NOR flash. This saves RAM
|
|
space since the text section of the kernel is not loaded from flash
|
|
to RAM. Read-write sections, such as the data section and stack,
|
|
are still copied to RAM. The XIP kernel is not compressed since
|
|
it has to run directly from flash, so it will take more space to
|
|
store it. The flash address used to link the kernel object files,
|
|
and for storing it, is configuration dependent. Therefore, if you
|
|
say Y here, you must know the proper physical address where to
|
|
store the kernel image depending on your own flash memory usage.
|
|
|
|
Also note that the make target becomes "make xipImage" rather than
|
|
"make zImage" or "make Image". The final kernel binary to put in
|
|
ROM memory will be arch/arm/boot/xipImage.
|
|
|
|
If unsure, say N.
|
|
|
|
config XIP_PHYS_ADDR
|
|
hex "XIP Kernel Physical Location"
|
|
depends on XIP_KERNEL
|
|
default "0x00080000"
|
|
help
|
|
This is the physical address in your flash memory the kernel will
|
|
be linked for and stored to. This address is dependent on your
|
|
own flash usage.
|
|
|
|
config KEXEC
|
|
bool "Kexec system call (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
kexec is a system call that implements the ability to shutdown your
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
but it is independent of the system firmware. And like a reboot
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
initially work for you. It may help to enable device hotplugging
|
|
support.
|
|
|
|
config ATAGS_PROC
|
|
bool "Export atags in procfs"
|
|
depends on KEXEC
|
|
default y
|
|
help
|
|
Should the atags used to boot the kernel be exported in an "atags"
|
|
file in procfs. Useful with kexec.
|
|
|
|
config CRASH_DUMP
|
|
bool "Build kdump crash kernel (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
Generate crash dump after being started by kexec. This should
|
|
be normally only set in special crash dump kernels which are
|
|
loaded in the main kernel with kexec-tools into a specially
|
|
reserved region and then later executed after a crash by
|
|
kdump/kexec. The crash dump kernel must be compiled to a
|
|
memory address not used by the main kernel
|
|
|
|
For more details see Documentation/kdump/kdump.txt
|
|
|
|
config AUTO_ZRELADDR
|
|
bool "Auto calculation of the decompressed kernel image address"
|
|
depends on !ZBOOT_ROM && !ARCH_U300
|
|
help
|
|
ZRELADDR is the physical address where the decompressed kernel
|
|
image will be placed. If AUTO_ZRELADDR is selected, the address
|
|
will be determined at run-time by masking the current IP with
|
|
0xf8000000. This assumes the zImage being placed in the first 128MB
|
|
from start of memory.
|
|
|
|
endmenu
|
|
|
|
menu "CPU Power Management"
|
|
|
|
if ARCH_HAS_CPUFREQ
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config CPU_FREQ_IMX
|
|
tristate "CPUfreq driver for i.MX CPUs"
|
|
depends on ARCH_MXC && CPU_FREQ
|
|
help
|
|
This enables the CPUfreq driver for i.MX CPUs.
|
|
|
|
config CPU_FREQ_SA1100
|
|
bool
|
|
|
|
config CPU_FREQ_SA1110
|
|
bool
|
|
|
|
config CPU_FREQ_INTEGRATOR
|
|
tristate "CPUfreq driver for ARM Integrator CPUs"
|
|
depends on ARCH_INTEGRATOR && CPU_FREQ
|
|
default y
|
|
help
|
|
This enables the CPUfreq driver for ARM Integrator CPUs.
|
|
|
|
For details, take a look at <file:Documentation/cpu-freq>.
|
|
|
|
If in doubt, say Y.
|
|
|
|
config CPU_FREQ_PXA
|
|
bool
|
|
depends on CPU_FREQ && ARCH_PXA && PXA25x
|
|
default y
|
|
select CPU_FREQ_DEFAULT_GOV_USERSPACE
|
|
|
|
config CPU_FREQ_S3C64XX
|
|
bool "CPUfreq support for Samsung S3C64XX CPUs"
|
|
depends on CPU_FREQ && CPU_S3C6410
|
|
|
|
config CPU_FREQ_S3C
|
|
bool
|
|
help
|
|
Internal configuration node for common cpufreq on Samsung SoC
|
|
|
|
config CPU_FREQ_S3C24XX
|
|
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
|
|
depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
|
|
select CPU_FREQ_S3C
|
|
help
|
|
This enables the CPUfreq driver for the Samsung S3C24XX family
|
|
of CPUs.
|
|
|
|
For details, take a look at <file:Documentation/cpu-freq>.
|
|
|
|
If in doubt, say N.
|
|
|
|
config CPU_FREQ_S3C24XX_PLL
|
|
bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
|
|
depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
|
|
help
|
|
Compile in support for changing the PLL frequency from the
|
|
S3C24XX series CPUfreq driver. The PLL takes time to settle
|
|
after a frequency change, so by default it is not enabled.
|
|
|
|
This also means that the PLL tables for the selected CPU(s) will
|
|
be built which may increase the size of the kernel image.
|
|
|
|
config CPU_FREQ_S3C24XX_DEBUG
|
|
bool "Debug CPUfreq Samsung driver core"
|
|
depends on CPU_FREQ_S3C24XX
|
|
help
|
|
Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
|
|
|
|
config CPU_FREQ_S3C24XX_IODEBUG
|
|
bool "Debug CPUfreq Samsung driver IO timing"
|
|
depends on CPU_FREQ_S3C24XX
|
|
help
|
|
Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
|
|
|
|
config CPU_FREQ_S3C24XX_DEBUGFS
|
|
bool "Export debugfs for CPUFreq"
|
|
depends on CPU_FREQ_S3C24XX && DEBUG_FS
|
|
help
|
|
Export status information via debugfs.
|
|
|
|
endif
|
|
|
|
source "drivers/cpuidle/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Floating point emulation"
|
|
|
|
comment "At least one emulation must be selected"
|
|
|
|
config FPE_NWFPE
|
|
bool "NWFPE math emulation"
|
|
depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
|
|
---help---
|
|
Say Y to include the NWFPE floating point emulator in the kernel.
|
|
This is necessary to run most binaries. Linux does not currently
|
|
support floating point hardware so you need to say Y here even if
|
|
your machine has an FPA or floating point co-processor podule.
|
|
|
|
You may say N here if you are going to load the Acorn FPEmulator
|
|
early in the bootup.
|
|
|
|
config FPE_NWFPE_XP
|
|
bool "Support extended precision"
|
|
depends on FPE_NWFPE
|
|
help
|
|
Say Y to include 80-bit support in the kernel floating-point
|
|
emulator. Otherwise, only 32 and 64-bit support is compiled in.
|
|
Note that gcc does not generate 80-bit operations by default,
|
|
so in most cases this option only enlarges the size of the
|
|
floating point emulator without any good reason.
|
|
|
|
You almost surely want to say N here.
|
|
|
|
config FPE_FASTFPE
|
|
bool "FastFPE math emulation (EXPERIMENTAL)"
|
|
depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
|
|
---help---
|
|
Say Y here to include the FAST floating point emulator in the kernel.
|
|
This is an experimental much faster emulator which now also has full
|
|
precision for the mantissa. It does not support any exceptions.
|
|
It is very simple, and approximately 3-6 times faster than NWFPE.
|
|
|
|
It should be sufficient for most programs. It may be not suitable
|
|
for scientific calculations, but you have to check this for yourself.
|
|
If you do not feel you need a faster FP emulation you should better
|
|
choose NWFPE.
|
|
|
|
config VFP
|
|
bool "VFP-format floating point maths"
|
|
depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
|
|
help
|
|
Say Y to include VFP support code in the kernel. This is needed
|
|
if your hardware includes a VFP unit.
|
|
|
|
Please see <file:Documentation/arm/VFP/release-notes.txt> for
|
|
release notes and additional status information.
|
|
|
|
Say N if your target does not have VFP hardware.
|
|
|
|
config VFPv3
|
|
bool
|
|
depends on VFP
|
|
default y if CPU_V7
|
|
|
|
config NEON
|
|
bool "Advanced SIMD (NEON) Extension support"
|
|
depends on VFPv3 && CPU_V7
|
|
help
|
|
Say Y to include support code for NEON, the ARMv7 Advanced SIMD
|
|
Extension.
|
|
|
|
endmenu
|
|
|
|
menu "Userspace binary formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
config ARTHUR
|
|
tristate "RISC OS personality"
|
|
depends on !AEABI
|
|
help
|
|
Say Y here to include the kernel code necessary if you want to run
|
|
Acorn RISC OS/Arthur binaries under Linux. This code is still very
|
|
experimental; if this sounds frightening, say N and sleep in peace.
|
|
You can also say M here to compile this support as a module (which
|
|
will be called arthur).
|
|
|
|
endmenu
|
|
|
|
menu "Power management options"
|
|
|
|
source "kernel/power/Kconfig"
|
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
def_bool y
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/arm/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|