linux/arch/s390/kernel/ftrace.c

245 lines
6.9 KiB
C

/*
* Dynamic function tracer architecture backend.
*
* Copyright IBM Corp. 2009,2014
*
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#include <linux/moduleloader.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/kprobes.h>
#include <trace/syscall.h>
#include <asm/asm-offsets.h>
#include <asm/cacheflush.h>
#include "entry.h"
/*
* The mcount code looks like this:
* stg %r14,8(%r15) # offset 0
* larl %r1,<&counter> # offset 6
* brasl %r14,_mcount # offset 12
* lg %r14,8(%r15) # offset 18
* Total length is 24 bytes. Only the first instruction will be patched
* by ftrace_make_call / ftrace_make_nop.
* The enabled ftrace code block looks like this:
* > brasl %r0,ftrace_caller # offset 0
* larl %r1,<&counter> # offset 6
* brasl %r14,_mcount # offset 12
* lg %r14,8(%r15) # offset 18
* The ftrace function gets called with a non-standard C function call ABI
* where r0 contains the return address. It is also expected that the called
* function only clobbers r0 and r1, but restores r2-r15.
* For module code we can't directly jump to ftrace caller, but need a
* trampoline (ftrace_plt), which clobbers also r1.
* The return point of the ftrace function has offset 24, so execution
* continues behind the mcount block.
* The disabled ftrace code block looks like this:
* > jg .+24 # offset 0
* larl %r1,<&counter> # offset 6
* brasl %r14,_mcount # offset 12
* lg %r14,8(%r15) # offset 18
* The jg instruction branches to offset 24 to skip as many instructions
* as possible.
* In case we use gcc's hotpatch feature the original and also the disabled
* function prologue contains only a single six byte instruction and looks
* like this:
* > brcl 0,0 # offset 0
* To enable ftrace the code gets patched like above and afterwards looks
* like this:
* > brasl %r0,ftrace_caller # offset 0
*/
unsigned long ftrace_plt;
static inline void ftrace_generate_orig_insn(struct ftrace_insn *insn)
{
#ifdef CC_USING_HOTPATCH
/* brcl 0,0 */
insn->opc = 0xc004;
insn->disp = 0;
#else
/* stg r14,8(r15) */
insn->opc = 0xe3e0;
insn->disp = 0xf0080024;
#endif
}
static inline int is_kprobe_on_ftrace(struct ftrace_insn *insn)
{
#ifdef CONFIG_KPROBES
if (insn->opc == BREAKPOINT_INSTRUCTION)
return 1;
#endif
return 0;
}
static inline void ftrace_generate_kprobe_nop_insn(struct ftrace_insn *insn)
{
#ifdef CONFIG_KPROBES
insn->opc = BREAKPOINT_INSTRUCTION;
insn->disp = KPROBE_ON_FTRACE_NOP;
#endif
}
static inline void ftrace_generate_kprobe_call_insn(struct ftrace_insn *insn)
{
#ifdef CONFIG_KPROBES
insn->opc = BREAKPOINT_INSTRUCTION;
insn->disp = KPROBE_ON_FTRACE_CALL;
#endif
}
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
return 0;
}
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
struct ftrace_insn orig, new, old;
if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old)))
return -EFAULT;
if (addr == MCOUNT_ADDR) {
/* Initial code replacement */
ftrace_generate_orig_insn(&orig);
ftrace_generate_nop_insn(&new);
} else if (is_kprobe_on_ftrace(&old)) {
/*
* If we find a breakpoint instruction, a kprobe has been
* placed at the beginning of the function. We write the
* constant KPROBE_ON_FTRACE_NOP into the remaining four
* bytes of the original instruction so that the kprobes
* handler can execute a nop, if it reaches this breakpoint.
*/
ftrace_generate_kprobe_call_insn(&orig);
ftrace_generate_kprobe_nop_insn(&new);
} else {
/* Replace ftrace call with a nop. */
ftrace_generate_call_insn(&orig, rec->ip);
ftrace_generate_nop_insn(&new);
}
/* Verify that the to be replaced code matches what we expect. */
if (memcmp(&orig, &old, sizeof(old)))
return -EINVAL;
s390_kernel_write((void *) rec->ip, &new, sizeof(new));
return 0;
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
struct ftrace_insn orig, new, old;
if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old)))
return -EFAULT;
if (is_kprobe_on_ftrace(&old)) {
/*
* If we find a breakpoint instruction, a kprobe has been
* placed at the beginning of the function. We write the
* constant KPROBE_ON_FTRACE_CALL into the remaining four
* bytes of the original instruction so that the kprobes
* handler can execute a brasl if it reaches this breakpoint.
*/
ftrace_generate_kprobe_nop_insn(&orig);
ftrace_generate_kprobe_call_insn(&new);
} else {
/* Replace nop with an ftrace call. */
ftrace_generate_nop_insn(&orig);
ftrace_generate_call_insn(&new, rec->ip);
}
/* Verify that the to be replaced code matches what we expect. */
if (memcmp(&orig, &old, sizeof(old)))
return -EINVAL;
s390_kernel_write((void *) rec->ip, &new, sizeof(new));
return 0;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
return 0;
}
int __init ftrace_dyn_arch_init(void)
{
return 0;
}
static int __init ftrace_plt_init(void)
{
unsigned int *ip;
ftrace_plt = (unsigned long) module_alloc(PAGE_SIZE);
if (!ftrace_plt)
panic("cannot allocate ftrace plt\n");
ip = (unsigned int *) ftrace_plt;
ip[0] = 0x0d10e310; /* basr 1,0; lg 1,10(1); br 1 */
ip[1] = 0x100a0004;
ip[2] = 0x07f10000;
ip[3] = FTRACE_ADDR >> 32;
ip[4] = FTRACE_ADDR & 0xffffffff;
set_memory_ro(ftrace_plt, 1);
return 0;
}
device_initcall(ftrace_plt_init);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
* Hook the return address and push it in the stack of return addresses
* in current thread info.
*/
unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
{
struct ftrace_graph_ent trace;
if (unlikely(ftrace_graph_is_dead()))
goto out;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
goto out;
ip -= MCOUNT_INSN_SIZE;
trace.func = ip;
trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to. */
if (!ftrace_graph_entry(&trace))
goto out;
if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
goto out;
parent = (unsigned long) return_to_handler;
out:
return parent;
}
NOKPROBE_SYMBOL(prepare_ftrace_return);
/*
* Patch the kernel code at ftrace_graph_caller location. The instruction
* there is branch relative on condition. To enable the ftrace graph code
* block, we simply patch the mask field of the instruction to zero and
* turn the instruction into a nop.
* To disable the ftrace graph code the mask field will be patched to
* all ones, which turns the instruction into an unconditional branch.
*/
int ftrace_enable_ftrace_graph_caller(void)
{
u8 op = 0x04; /* set mask field to zero */
s390_kernel_write(__va(ftrace_graph_caller)+1, &op, sizeof(op));
return 0;
}
int ftrace_disable_ftrace_graph_caller(void)
{
u8 op = 0xf4; /* set mask field to all ones */
s390_kernel_write(__va(ftrace_graph_caller)+1, &op, sizeof(op));
return 0;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */