b13d1f0f9a
This patch adds the erase capability to OMAP1/OMAP2420 MMC driver. Idea is the same than in commit 93caf8e ("omap_hsmmc: add erase capability") that we disable the data timeout interrupt for erases. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
1507 lines
37 KiB
C
1507 lines
37 KiB
C
/*
|
|
* linux/drivers/mmc/host/omap.c
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com>
|
|
* Misc hacks here and there by Tony Lindgren <tony@atomide.com>
|
|
* Other hacks (DMA, SD, etc) by David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/omap-dma.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_data/mmc-omap.h>
|
|
|
|
|
|
#define OMAP_MMC_REG_CMD 0x00
|
|
#define OMAP_MMC_REG_ARGL 0x01
|
|
#define OMAP_MMC_REG_ARGH 0x02
|
|
#define OMAP_MMC_REG_CON 0x03
|
|
#define OMAP_MMC_REG_STAT 0x04
|
|
#define OMAP_MMC_REG_IE 0x05
|
|
#define OMAP_MMC_REG_CTO 0x06
|
|
#define OMAP_MMC_REG_DTO 0x07
|
|
#define OMAP_MMC_REG_DATA 0x08
|
|
#define OMAP_MMC_REG_BLEN 0x09
|
|
#define OMAP_MMC_REG_NBLK 0x0a
|
|
#define OMAP_MMC_REG_BUF 0x0b
|
|
#define OMAP_MMC_REG_SDIO 0x0d
|
|
#define OMAP_MMC_REG_REV 0x0f
|
|
#define OMAP_MMC_REG_RSP0 0x10
|
|
#define OMAP_MMC_REG_RSP1 0x11
|
|
#define OMAP_MMC_REG_RSP2 0x12
|
|
#define OMAP_MMC_REG_RSP3 0x13
|
|
#define OMAP_MMC_REG_RSP4 0x14
|
|
#define OMAP_MMC_REG_RSP5 0x15
|
|
#define OMAP_MMC_REG_RSP6 0x16
|
|
#define OMAP_MMC_REG_RSP7 0x17
|
|
#define OMAP_MMC_REG_IOSR 0x18
|
|
#define OMAP_MMC_REG_SYSC 0x19
|
|
#define OMAP_MMC_REG_SYSS 0x1a
|
|
|
|
#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
|
|
#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
|
|
#define OMAP_MMC_STAT_OCR_BUSY (1 << 12)
|
|
#define OMAP_MMC_STAT_A_EMPTY (1 << 11)
|
|
#define OMAP_MMC_STAT_A_FULL (1 << 10)
|
|
#define OMAP_MMC_STAT_CMD_CRC (1 << 8)
|
|
#define OMAP_MMC_STAT_CMD_TOUT (1 << 7)
|
|
#define OMAP_MMC_STAT_DATA_CRC (1 << 6)
|
|
#define OMAP_MMC_STAT_DATA_TOUT (1 << 5)
|
|
#define OMAP_MMC_STAT_END_BUSY (1 << 4)
|
|
#define OMAP_MMC_STAT_END_OF_DATA (1 << 3)
|
|
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
|
|
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
|
|
|
|
#define mmc_omap7xx() (host->features & MMC_OMAP7XX)
|
|
#define mmc_omap15xx() (host->features & MMC_OMAP15XX)
|
|
#define mmc_omap16xx() (host->features & MMC_OMAP16XX)
|
|
#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
|
|
#define mmc_omap1() (host->features & MMC_OMAP1_MASK)
|
|
#define mmc_omap2() (!mmc_omap1())
|
|
|
|
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
|
|
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
|
|
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
|
|
|
|
/*
|
|
* Command types
|
|
*/
|
|
#define OMAP_MMC_CMDTYPE_BC 0
|
|
#define OMAP_MMC_CMDTYPE_BCR 1
|
|
#define OMAP_MMC_CMDTYPE_AC 2
|
|
#define OMAP_MMC_CMDTYPE_ADTC 3
|
|
|
|
#define DRIVER_NAME "mmci-omap"
|
|
|
|
/* Specifies how often in millisecs to poll for card status changes
|
|
* when the cover switch is open */
|
|
#define OMAP_MMC_COVER_POLL_DELAY 500
|
|
|
|
struct mmc_omap_host;
|
|
|
|
struct mmc_omap_slot {
|
|
int id;
|
|
unsigned int vdd;
|
|
u16 saved_con;
|
|
u16 bus_mode;
|
|
unsigned int fclk_freq;
|
|
|
|
struct tasklet_struct cover_tasklet;
|
|
struct timer_list cover_timer;
|
|
unsigned cover_open;
|
|
|
|
struct mmc_request *mrq;
|
|
struct mmc_omap_host *host;
|
|
struct mmc_host *mmc;
|
|
struct omap_mmc_slot_data *pdata;
|
|
};
|
|
|
|
struct mmc_omap_host {
|
|
int initialized;
|
|
struct mmc_request * mrq;
|
|
struct mmc_command * cmd;
|
|
struct mmc_data * data;
|
|
struct mmc_host * mmc;
|
|
struct device * dev;
|
|
unsigned char id; /* 16xx chips have 2 MMC blocks */
|
|
struct clk * iclk;
|
|
struct clk * fclk;
|
|
struct dma_chan *dma_rx;
|
|
u32 dma_rx_burst;
|
|
struct dma_chan *dma_tx;
|
|
u32 dma_tx_burst;
|
|
void __iomem *virt_base;
|
|
unsigned int phys_base;
|
|
int irq;
|
|
unsigned char bus_mode;
|
|
unsigned int reg_shift;
|
|
|
|
struct work_struct cmd_abort_work;
|
|
unsigned abort:1;
|
|
struct timer_list cmd_abort_timer;
|
|
|
|
struct work_struct slot_release_work;
|
|
struct mmc_omap_slot *next_slot;
|
|
struct work_struct send_stop_work;
|
|
struct mmc_data *stop_data;
|
|
|
|
unsigned int sg_len;
|
|
int sg_idx;
|
|
u16 * buffer;
|
|
u32 buffer_bytes_left;
|
|
u32 total_bytes_left;
|
|
|
|
unsigned features;
|
|
unsigned brs_received:1, dma_done:1;
|
|
unsigned dma_in_use:1;
|
|
spinlock_t dma_lock;
|
|
|
|
struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS];
|
|
struct mmc_omap_slot *current_slot;
|
|
spinlock_t slot_lock;
|
|
wait_queue_head_t slot_wq;
|
|
int nr_slots;
|
|
|
|
struct timer_list clk_timer;
|
|
spinlock_t clk_lock; /* for changing enabled state */
|
|
unsigned int fclk_enabled:1;
|
|
struct workqueue_struct *mmc_omap_wq;
|
|
|
|
struct omap_mmc_platform_data *pdata;
|
|
};
|
|
|
|
|
|
static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
|
|
{
|
|
unsigned long tick_ns;
|
|
|
|
if (slot != NULL && slot->host->fclk_enabled && slot->fclk_freq > 0) {
|
|
tick_ns = (1000000000 + slot->fclk_freq - 1) / slot->fclk_freq;
|
|
ndelay(8 * tick_ns);
|
|
}
|
|
}
|
|
|
|
static void mmc_omap_fclk_enable(struct mmc_omap_host *host, unsigned int enable)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->clk_lock, flags);
|
|
if (host->fclk_enabled != enable) {
|
|
host->fclk_enabled = enable;
|
|
if (enable)
|
|
clk_enable(host->fclk);
|
|
else
|
|
clk_disable(host->fclk);
|
|
}
|
|
spin_unlock_irqrestore(&host->clk_lock, flags);
|
|
}
|
|
|
|
static void mmc_omap_select_slot(struct mmc_omap_slot *slot, int claimed)
|
|
{
|
|
struct mmc_omap_host *host = slot->host;
|
|
unsigned long flags;
|
|
|
|
if (claimed)
|
|
goto no_claim;
|
|
spin_lock_irqsave(&host->slot_lock, flags);
|
|
while (host->mmc != NULL) {
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
wait_event(host->slot_wq, host->mmc == NULL);
|
|
spin_lock_irqsave(&host->slot_lock, flags);
|
|
}
|
|
host->mmc = slot->mmc;
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
no_claim:
|
|
del_timer(&host->clk_timer);
|
|
if (host->current_slot != slot || !claimed)
|
|
mmc_omap_fclk_offdelay(host->current_slot);
|
|
|
|
if (host->current_slot != slot) {
|
|
OMAP_MMC_WRITE(host, CON, slot->saved_con & 0xFC00);
|
|
if (host->pdata->switch_slot != NULL)
|
|
host->pdata->switch_slot(mmc_dev(slot->mmc), slot->id);
|
|
host->current_slot = slot;
|
|
}
|
|
|
|
if (claimed) {
|
|
mmc_omap_fclk_enable(host, 1);
|
|
|
|
/* Doing the dummy read here seems to work around some bug
|
|
* at least in OMAP24xx silicon where the command would not
|
|
* start after writing the CMD register. Sigh. */
|
|
OMAP_MMC_READ(host, CON);
|
|
|
|
OMAP_MMC_WRITE(host, CON, slot->saved_con);
|
|
} else
|
|
mmc_omap_fclk_enable(host, 0);
|
|
}
|
|
|
|
static void mmc_omap_start_request(struct mmc_omap_host *host,
|
|
struct mmc_request *req);
|
|
|
|
static void mmc_omap_slot_release_work(struct work_struct *work)
|
|
{
|
|
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
|
|
slot_release_work);
|
|
struct mmc_omap_slot *next_slot = host->next_slot;
|
|
struct mmc_request *rq;
|
|
|
|
host->next_slot = NULL;
|
|
mmc_omap_select_slot(next_slot, 1);
|
|
|
|
rq = next_slot->mrq;
|
|
next_slot->mrq = NULL;
|
|
mmc_omap_start_request(host, rq);
|
|
}
|
|
|
|
static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
|
|
{
|
|
struct mmc_omap_host *host = slot->host;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
BUG_ON(slot == NULL || host->mmc == NULL);
|
|
|
|
if (clk_enabled)
|
|
/* Keeps clock running for at least 8 cycles on valid freq */
|
|
mod_timer(&host->clk_timer, jiffies + HZ/10);
|
|
else {
|
|
del_timer(&host->clk_timer);
|
|
mmc_omap_fclk_offdelay(slot);
|
|
mmc_omap_fclk_enable(host, 0);
|
|
}
|
|
|
|
spin_lock_irqsave(&host->slot_lock, flags);
|
|
/* Check for any pending requests */
|
|
for (i = 0; i < host->nr_slots; i++) {
|
|
struct mmc_omap_slot *new_slot;
|
|
|
|
if (host->slots[i] == NULL || host->slots[i]->mrq == NULL)
|
|
continue;
|
|
|
|
BUG_ON(host->next_slot != NULL);
|
|
new_slot = host->slots[i];
|
|
/* The current slot should not have a request in queue */
|
|
BUG_ON(new_slot == host->current_slot);
|
|
|
|
host->next_slot = new_slot;
|
|
host->mmc = new_slot->mmc;
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
queue_work(host->mmc_omap_wq, &host->slot_release_work);
|
|
return;
|
|
}
|
|
|
|
host->mmc = NULL;
|
|
wake_up(&host->slot_wq);
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
}
|
|
|
|
static inline
|
|
int mmc_omap_cover_is_open(struct mmc_omap_slot *slot)
|
|
{
|
|
if (slot->pdata->get_cover_state)
|
|
return slot->pdata->get_cover_state(mmc_dev(slot->mmc),
|
|
slot->id);
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t
|
|
mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct mmc_omap_slot *slot = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n", mmc_omap_cover_is_open(slot) ? "open" :
|
|
"closed");
|
|
}
|
|
|
|
static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
|
|
|
|
static ssize_t
|
|
mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct mmc_omap_slot *slot = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n", slot->pdata->name);
|
|
}
|
|
|
|
static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
|
|
|
|
static void
|
|
mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
|
|
{
|
|
u32 cmdreg;
|
|
u32 resptype;
|
|
u32 cmdtype;
|
|
u16 irq_mask;
|
|
|
|
host->cmd = cmd;
|
|
|
|
resptype = 0;
|
|
cmdtype = 0;
|
|
|
|
/* Our hardware needs to know exact type */
|
|
switch (mmc_resp_type(cmd)) {
|
|
case MMC_RSP_NONE:
|
|
break;
|
|
case MMC_RSP_R1:
|
|
case MMC_RSP_R1B:
|
|
/* resp 1, 1b, 6, 7 */
|
|
resptype = 1;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
resptype = 2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
resptype = 3;
|
|
break;
|
|
default:
|
|
dev_err(mmc_dev(host->mmc), "Invalid response type: %04x\n", mmc_resp_type(cmd));
|
|
break;
|
|
}
|
|
|
|
if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) {
|
|
cmdtype = OMAP_MMC_CMDTYPE_ADTC;
|
|
} else if (mmc_cmd_type(cmd) == MMC_CMD_BC) {
|
|
cmdtype = OMAP_MMC_CMDTYPE_BC;
|
|
} else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) {
|
|
cmdtype = OMAP_MMC_CMDTYPE_BCR;
|
|
} else {
|
|
cmdtype = OMAP_MMC_CMDTYPE_AC;
|
|
}
|
|
|
|
cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
|
|
|
|
if (host->current_slot->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
cmdreg |= 1 << 6;
|
|
|
|
if (cmd->flags & MMC_RSP_BUSY)
|
|
cmdreg |= 1 << 11;
|
|
|
|
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
|
|
cmdreg |= 1 << 15;
|
|
|
|
mod_timer(&host->cmd_abort_timer, jiffies + HZ/2);
|
|
|
|
OMAP_MMC_WRITE(host, CTO, 200);
|
|
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
|
|
OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
|
|
irq_mask = OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
|
|
OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
|
|
OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
|
|
OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
|
|
OMAP_MMC_STAT_END_OF_DATA;
|
|
if (cmd->opcode == MMC_ERASE)
|
|
irq_mask &= ~OMAP_MMC_STAT_DATA_TOUT;
|
|
OMAP_MMC_WRITE(host, IE, irq_mask);
|
|
OMAP_MMC_WRITE(host, CMD, cmdreg);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_release_dma(struct mmc_omap_host *host, struct mmc_data *data,
|
|
int abort)
|
|
{
|
|
enum dma_data_direction dma_data_dir;
|
|
struct device *dev = mmc_dev(host->mmc);
|
|
struct dma_chan *c;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
dma_data_dir = DMA_TO_DEVICE;
|
|
c = host->dma_tx;
|
|
} else {
|
|
dma_data_dir = DMA_FROM_DEVICE;
|
|
c = host->dma_rx;
|
|
}
|
|
if (c) {
|
|
if (data->error) {
|
|
dmaengine_terminate_all(c);
|
|
/* Claim nothing transferred on error... */
|
|
data->bytes_xfered = 0;
|
|
}
|
|
dev = c->device->dev;
|
|
}
|
|
dma_unmap_sg(dev, data->sg, host->sg_len, dma_data_dir);
|
|
}
|
|
|
|
static void mmc_omap_send_stop_work(struct work_struct *work)
|
|
{
|
|
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
|
|
send_stop_work);
|
|
struct mmc_omap_slot *slot = host->current_slot;
|
|
struct mmc_data *data = host->stop_data;
|
|
unsigned long tick_ns;
|
|
|
|
tick_ns = (1000000000 + slot->fclk_freq - 1)/slot->fclk_freq;
|
|
ndelay(8*tick_ns);
|
|
|
|
mmc_omap_start_command(host, data->stop);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
|
|
{
|
|
if (host->dma_in_use)
|
|
mmc_omap_release_dma(host, data, data->error);
|
|
|
|
host->data = NULL;
|
|
host->sg_len = 0;
|
|
|
|
/* NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
|
|
* dozens of requests until the card finishes writing data.
|
|
* It'd be cheaper to just wait till an EOFB interrupt arrives...
|
|
*/
|
|
|
|
if (!data->stop) {
|
|
struct mmc_host *mmc;
|
|
|
|
host->mrq = NULL;
|
|
mmc = host->mmc;
|
|
mmc_omap_release_slot(host->current_slot, 1);
|
|
mmc_request_done(mmc, data->mrq);
|
|
return;
|
|
}
|
|
|
|
host->stop_data = data;
|
|
queue_work(host->mmc_omap_wq, &host->send_stop_work);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_send_abort(struct mmc_omap_host *host, int maxloops)
|
|
{
|
|
struct mmc_omap_slot *slot = host->current_slot;
|
|
unsigned int restarts, passes, timeout;
|
|
u16 stat = 0;
|
|
|
|
/* Sending abort takes 80 clocks. Have some extra and round up */
|
|
timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
|
|
restarts = 0;
|
|
while (restarts < maxloops) {
|
|
OMAP_MMC_WRITE(host, STAT, 0xFFFF);
|
|
OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
|
|
|
|
passes = 0;
|
|
while (passes < timeout) {
|
|
stat = OMAP_MMC_READ(host, STAT);
|
|
if (stat & OMAP_MMC_STAT_END_OF_CMD)
|
|
goto out;
|
|
udelay(1);
|
|
passes++;
|
|
}
|
|
|
|
restarts++;
|
|
}
|
|
out:
|
|
OMAP_MMC_WRITE(host, STAT, stat);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
|
|
{
|
|
if (host->dma_in_use)
|
|
mmc_omap_release_dma(host, data, 1);
|
|
|
|
host->data = NULL;
|
|
host->sg_len = 0;
|
|
|
|
mmc_omap_send_abort(host, 10000);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned long flags;
|
|
int done;
|
|
|
|
if (!host->dma_in_use) {
|
|
mmc_omap_xfer_done(host, data);
|
|
return;
|
|
}
|
|
done = 0;
|
|
spin_lock_irqsave(&host->dma_lock, flags);
|
|
if (host->dma_done)
|
|
done = 1;
|
|
else
|
|
host->brs_received = 1;
|
|
spin_unlock_irqrestore(&host->dma_lock, flags);
|
|
if (done)
|
|
mmc_omap_xfer_done(host, data);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned long flags;
|
|
int done;
|
|
|
|
done = 0;
|
|
spin_lock_irqsave(&host->dma_lock, flags);
|
|
if (host->brs_received)
|
|
done = 1;
|
|
else
|
|
host->dma_done = 1;
|
|
spin_unlock_irqrestore(&host->dma_lock, flags);
|
|
if (done)
|
|
mmc_omap_xfer_done(host, data);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
|
|
{
|
|
host->cmd = NULL;
|
|
|
|
del_timer(&host->cmd_abort_timer);
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
/* response type 2 */
|
|
cmd->resp[3] =
|
|
OMAP_MMC_READ(host, RSP0) |
|
|
(OMAP_MMC_READ(host, RSP1) << 16);
|
|
cmd->resp[2] =
|
|
OMAP_MMC_READ(host, RSP2) |
|
|
(OMAP_MMC_READ(host, RSP3) << 16);
|
|
cmd->resp[1] =
|
|
OMAP_MMC_READ(host, RSP4) |
|
|
(OMAP_MMC_READ(host, RSP5) << 16);
|
|
cmd->resp[0] =
|
|
OMAP_MMC_READ(host, RSP6) |
|
|
(OMAP_MMC_READ(host, RSP7) << 16);
|
|
} else {
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
cmd->resp[0] =
|
|
OMAP_MMC_READ(host, RSP6) |
|
|
(OMAP_MMC_READ(host, RSP7) << 16);
|
|
}
|
|
}
|
|
|
|
if (host->data == NULL || cmd->error) {
|
|
struct mmc_host *mmc;
|
|
|
|
if (host->data != NULL)
|
|
mmc_omap_abort_xfer(host, host->data);
|
|
host->mrq = NULL;
|
|
mmc = host->mmc;
|
|
mmc_omap_release_slot(host->current_slot, 1);
|
|
mmc_request_done(mmc, cmd->mrq);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Abort stuck command. Can occur when card is removed while it is being
|
|
* read.
|
|
*/
|
|
static void mmc_omap_abort_command(struct work_struct *work)
|
|
{
|
|
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
|
|
cmd_abort_work);
|
|
BUG_ON(!host->cmd);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
|
|
host->cmd->opcode);
|
|
|
|
if (host->cmd->error == 0)
|
|
host->cmd->error = -ETIMEDOUT;
|
|
|
|
if (host->data == NULL) {
|
|
struct mmc_command *cmd;
|
|
struct mmc_host *mmc;
|
|
|
|
cmd = host->cmd;
|
|
host->cmd = NULL;
|
|
mmc_omap_send_abort(host, 10000);
|
|
|
|
host->mrq = NULL;
|
|
mmc = host->mmc;
|
|
mmc_omap_release_slot(host->current_slot, 1);
|
|
mmc_request_done(mmc, cmd->mrq);
|
|
} else
|
|
mmc_omap_cmd_done(host, host->cmd);
|
|
|
|
host->abort = 0;
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_cmd_timer(unsigned long data)
|
|
{
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->slot_lock, flags);
|
|
if (host->cmd != NULL && !host->abort) {
|
|
OMAP_MMC_WRITE(host, IE, 0);
|
|
disable_irq(host->irq);
|
|
host->abort = 1;
|
|
queue_work(host->mmc_omap_wq, &host->cmd_abort_work);
|
|
}
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
}
|
|
|
|
/* PIO only */
|
|
static void
|
|
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
|
|
{
|
|
struct scatterlist *sg;
|
|
|
|
sg = host->data->sg + host->sg_idx;
|
|
host->buffer_bytes_left = sg->length;
|
|
host->buffer = sg_virt(sg);
|
|
if (host->buffer_bytes_left > host->total_bytes_left)
|
|
host->buffer_bytes_left = host->total_bytes_left;
|
|
}
|
|
|
|
static void
|
|
mmc_omap_clk_timer(unsigned long data)
|
|
{
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
|
|
|
|
mmc_omap_fclk_enable(host, 0);
|
|
}
|
|
|
|
/* PIO only */
|
|
static void
|
|
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
|
|
{
|
|
int n, nwords;
|
|
|
|
if (host->buffer_bytes_left == 0) {
|
|
host->sg_idx++;
|
|
BUG_ON(host->sg_idx == host->sg_len);
|
|
mmc_omap_sg_to_buf(host);
|
|
}
|
|
n = 64;
|
|
if (n > host->buffer_bytes_left)
|
|
n = host->buffer_bytes_left;
|
|
|
|
nwords = n / 2;
|
|
nwords += n & 1; /* handle odd number of bytes to transfer */
|
|
|
|
host->buffer_bytes_left -= n;
|
|
host->total_bytes_left -= n;
|
|
host->data->bytes_xfered += n;
|
|
|
|
if (write) {
|
|
__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA),
|
|
host->buffer, nwords);
|
|
} else {
|
|
__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA),
|
|
host->buffer, nwords);
|
|
}
|
|
|
|
host->buffer += nwords;
|
|
}
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status)
|
|
{
|
|
static const char *mmc_omap_status_bits[] = {
|
|
"EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
|
|
"CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
|
|
};
|
|
int i;
|
|
char res[64], *buf = res;
|
|
|
|
buf += sprintf(buf, "MMC IRQ 0x%x:", status);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
|
|
if (status & (1 << i))
|
|
buf += sprintf(buf, " %s", mmc_omap_status_bits[i]);
|
|
dev_vdbg(mmc_dev(host->mmc), "%s\n", res);
|
|
}
|
|
#else
|
|
static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
|
|
static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
|
|
{
|
|
struct mmc_omap_host * host = (struct mmc_omap_host *)dev_id;
|
|
u16 status;
|
|
int end_command;
|
|
int end_transfer;
|
|
int transfer_error, cmd_error;
|
|
|
|
if (host->cmd == NULL && host->data == NULL) {
|
|
status = OMAP_MMC_READ(host, STAT);
|
|
dev_info(mmc_dev(host->slots[0]->mmc),
|
|
"Spurious IRQ 0x%04x\n", status);
|
|
if (status != 0) {
|
|
OMAP_MMC_WRITE(host, STAT, status);
|
|
OMAP_MMC_WRITE(host, IE, 0);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
end_command = 0;
|
|
end_transfer = 0;
|
|
transfer_error = 0;
|
|
cmd_error = 0;
|
|
|
|
while ((status = OMAP_MMC_READ(host, STAT)) != 0) {
|
|
int cmd;
|
|
|
|
OMAP_MMC_WRITE(host, STAT, status);
|
|
if (host->cmd != NULL)
|
|
cmd = host->cmd->opcode;
|
|
else
|
|
cmd = -1;
|
|
dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
|
|
status, cmd);
|
|
mmc_omap_report_irq(host, status);
|
|
|
|
if (host->total_bytes_left) {
|
|
if ((status & OMAP_MMC_STAT_A_FULL) ||
|
|
(status & OMAP_MMC_STAT_END_OF_DATA))
|
|
mmc_omap_xfer_data(host, 0);
|
|
if (status & OMAP_MMC_STAT_A_EMPTY)
|
|
mmc_omap_xfer_data(host, 1);
|
|
}
|
|
|
|
if (status & OMAP_MMC_STAT_END_OF_DATA)
|
|
end_transfer = 1;
|
|
|
|
if (status & OMAP_MMC_STAT_DATA_TOUT) {
|
|
dev_dbg(mmc_dev(host->mmc), "data timeout (CMD%d)\n",
|
|
cmd);
|
|
if (host->data) {
|
|
host->data->error = -ETIMEDOUT;
|
|
transfer_error = 1;
|
|
}
|
|
}
|
|
|
|
if (status & OMAP_MMC_STAT_DATA_CRC) {
|
|
if (host->data) {
|
|
host->data->error = -EILSEQ;
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"data CRC error, bytes left %d\n",
|
|
host->total_bytes_left);
|
|
transfer_error = 1;
|
|
} else {
|
|
dev_dbg(mmc_dev(host->mmc), "data CRC error\n");
|
|
}
|
|
}
|
|
|
|
if (status & OMAP_MMC_STAT_CMD_TOUT) {
|
|
/* Timeouts are routine with some commands */
|
|
if (host->cmd) {
|
|
struct mmc_omap_slot *slot =
|
|
host->current_slot;
|
|
if (slot == NULL ||
|
|
!mmc_omap_cover_is_open(slot))
|
|
dev_err(mmc_dev(host->mmc),
|
|
"command timeout (CMD%d)\n",
|
|
cmd);
|
|
host->cmd->error = -ETIMEDOUT;
|
|
end_command = 1;
|
|
cmd_error = 1;
|
|
}
|
|
}
|
|
|
|
if (status & OMAP_MMC_STAT_CMD_CRC) {
|
|
if (host->cmd) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"command CRC error (CMD%d, arg 0x%08x)\n",
|
|
cmd, host->cmd->arg);
|
|
host->cmd->error = -EILSEQ;
|
|
end_command = 1;
|
|
cmd_error = 1;
|
|
} else
|
|
dev_err(mmc_dev(host->mmc),
|
|
"command CRC error without cmd?\n");
|
|
}
|
|
|
|
if (status & OMAP_MMC_STAT_CARD_ERR) {
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"ignoring card status error (CMD%d)\n",
|
|
cmd);
|
|
end_command = 1;
|
|
}
|
|
|
|
/*
|
|
* NOTE: On 1610 the END_OF_CMD may come too early when
|
|
* starting a write
|
|
*/
|
|
if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
|
|
(!(status & OMAP_MMC_STAT_A_EMPTY))) {
|
|
end_command = 1;
|
|
}
|
|
}
|
|
|
|
if (cmd_error && host->data) {
|
|
del_timer(&host->cmd_abort_timer);
|
|
host->abort = 1;
|
|
OMAP_MMC_WRITE(host, IE, 0);
|
|
disable_irq_nosync(host->irq);
|
|
queue_work(host->mmc_omap_wq, &host->cmd_abort_work);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (end_command && host->cmd)
|
|
mmc_omap_cmd_done(host, host->cmd);
|
|
if (host->data != NULL) {
|
|
if (transfer_error)
|
|
mmc_omap_xfer_done(host, host->data);
|
|
else if (end_transfer)
|
|
mmc_omap_end_of_data(host, host->data);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
void omap_mmc_notify_cover_event(struct device *dev, int num, int is_closed)
|
|
{
|
|
int cover_open;
|
|
struct mmc_omap_host *host = dev_get_drvdata(dev);
|
|
struct mmc_omap_slot *slot = host->slots[num];
|
|
|
|
BUG_ON(num >= host->nr_slots);
|
|
|
|
/* Other subsystems can call in here before we're initialised. */
|
|
if (host->nr_slots == 0 || !host->slots[num])
|
|
return;
|
|
|
|
cover_open = mmc_omap_cover_is_open(slot);
|
|
if (cover_open != slot->cover_open) {
|
|
slot->cover_open = cover_open;
|
|
sysfs_notify(&slot->mmc->class_dev.kobj, NULL, "cover_switch");
|
|
}
|
|
|
|
tasklet_hi_schedule(&slot->cover_tasklet);
|
|
}
|
|
|
|
static void mmc_omap_cover_timer(unsigned long arg)
|
|
{
|
|
struct mmc_omap_slot *slot = (struct mmc_omap_slot *) arg;
|
|
tasklet_schedule(&slot->cover_tasklet);
|
|
}
|
|
|
|
static void mmc_omap_cover_handler(unsigned long param)
|
|
{
|
|
struct mmc_omap_slot *slot = (struct mmc_omap_slot *)param;
|
|
int cover_open = mmc_omap_cover_is_open(slot);
|
|
|
|
mmc_detect_change(slot->mmc, 0);
|
|
if (!cover_open)
|
|
return;
|
|
|
|
/*
|
|
* If no card is inserted, we postpone polling until
|
|
* the cover has been closed.
|
|
*/
|
|
if (slot->mmc->card == NULL || !mmc_card_present(slot->mmc->card))
|
|
return;
|
|
|
|
mod_timer(&slot->cover_timer,
|
|
jiffies + msecs_to_jiffies(OMAP_MMC_COVER_POLL_DELAY));
|
|
}
|
|
|
|
static void mmc_omap_dma_callback(void *priv)
|
|
{
|
|
struct mmc_omap_host *host = priv;
|
|
struct mmc_data *data = host->data;
|
|
|
|
/* If we got to the end of DMA, assume everything went well */
|
|
data->bytes_xfered += data->blocks * data->blksz;
|
|
|
|
mmc_omap_dma_done(host, data);
|
|
}
|
|
|
|
static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req)
|
|
{
|
|
u16 reg;
|
|
|
|
reg = OMAP_MMC_READ(host, SDIO);
|
|
reg &= ~(1 << 5);
|
|
OMAP_MMC_WRITE(host, SDIO, reg);
|
|
/* Set maximum timeout */
|
|
OMAP_MMC_WRITE(host, CTO, 0xff);
|
|
}
|
|
|
|
static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
|
|
{
|
|
unsigned int timeout, cycle_ns;
|
|
u16 reg;
|
|
|
|
cycle_ns = 1000000000 / host->current_slot->fclk_freq;
|
|
timeout = req->data->timeout_ns / cycle_ns;
|
|
timeout += req->data->timeout_clks;
|
|
|
|
/* Check if we need to use timeout multiplier register */
|
|
reg = OMAP_MMC_READ(host, SDIO);
|
|
if (timeout > 0xffff) {
|
|
reg |= (1 << 5);
|
|
timeout /= 1024;
|
|
} else
|
|
reg &= ~(1 << 5);
|
|
OMAP_MMC_WRITE(host, SDIO, reg);
|
|
OMAP_MMC_WRITE(host, DTO, timeout);
|
|
}
|
|
|
|
static void
|
|
mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
|
|
{
|
|
struct mmc_data *data = req->data;
|
|
int i, use_dma = 1, block_size;
|
|
unsigned sg_len;
|
|
|
|
host->data = data;
|
|
if (data == NULL) {
|
|
OMAP_MMC_WRITE(host, BLEN, 0);
|
|
OMAP_MMC_WRITE(host, NBLK, 0);
|
|
OMAP_MMC_WRITE(host, BUF, 0);
|
|
host->dma_in_use = 0;
|
|
set_cmd_timeout(host, req);
|
|
return;
|
|
}
|
|
|
|
block_size = data->blksz;
|
|
|
|
OMAP_MMC_WRITE(host, NBLK, data->blocks - 1);
|
|
OMAP_MMC_WRITE(host, BLEN, block_size - 1);
|
|
set_data_timeout(host, req);
|
|
|
|
/* cope with calling layer confusion; it issues "single
|
|
* block" writes using multi-block scatterlists.
|
|
*/
|
|
sg_len = (data->blocks == 1) ? 1 : data->sg_len;
|
|
|
|
/* Only do DMA for entire blocks */
|
|
for (i = 0; i < sg_len; i++) {
|
|
if ((data->sg[i].length % block_size) != 0) {
|
|
use_dma = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
host->sg_idx = 0;
|
|
if (use_dma) {
|
|
enum dma_data_direction dma_data_dir;
|
|
struct dma_async_tx_descriptor *tx;
|
|
struct dma_chan *c;
|
|
u32 burst, *bp;
|
|
u16 buf;
|
|
|
|
/*
|
|
* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx
|
|
* and 24xx. Use 16 or 32 word frames when the
|
|
* blocksize is at least that large. Blocksize is
|
|
* usually 512 bytes; but not for some SD reads.
|
|
*/
|
|
burst = mmc_omap15xx() ? 32 : 64;
|
|
if (burst > data->blksz)
|
|
burst = data->blksz;
|
|
|
|
burst >>= 1;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
c = host->dma_tx;
|
|
bp = &host->dma_tx_burst;
|
|
buf = 0x0f80 | (burst - 1) << 0;
|
|
dma_data_dir = DMA_TO_DEVICE;
|
|
} else {
|
|
c = host->dma_rx;
|
|
bp = &host->dma_rx_burst;
|
|
buf = 0x800f | (burst - 1) << 8;
|
|
dma_data_dir = DMA_FROM_DEVICE;
|
|
}
|
|
|
|
if (!c)
|
|
goto use_pio;
|
|
|
|
/* Only reconfigure if we have a different burst size */
|
|
if (*bp != burst) {
|
|
struct dma_slave_config cfg;
|
|
|
|
cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
|
|
cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
|
|
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
cfg.src_maxburst = burst;
|
|
cfg.dst_maxburst = burst;
|
|
|
|
if (dmaengine_slave_config(c, &cfg))
|
|
goto use_pio;
|
|
|
|
*bp = burst;
|
|
}
|
|
|
|
host->sg_len = dma_map_sg(c->device->dev, data->sg, sg_len,
|
|
dma_data_dir);
|
|
if (host->sg_len == 0)
|
|
goto use_pio;
|
|
|
|
tx = dmaengine_prep_slave_sg(c, data->sg, host->sg_len,
|
|
data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!tx)
|
|
goto use_pio;
|
|
|
|
OMAP_MMC_WRITE(host, BUF, buf);
|
|
|
|
tx->callback = mmc_omap_dma_callback;
|
|
tx->callback_param = host;
|
|
dmaengine_submit(tx);
|
|
host->brs_received = 0;
|
|
host->dma_done = 0;
|
|
host->dma_in_use = 1;
|
|
return;
|
|
}
|
|
use_pio:
|
|
|
|
/* Revert to PIO? */
|
|
OMAP_MMC_WRITE(host, BUF, 0x1f1f);
|
|
host->total_bytes_left = data->blocks * block_size;
|
|
host->sg_len = sg_len;
|
|
mmc_omap_sg_to_buf(host);
|
|
host->dma_in_use = 0;
|
|
}
|
|
|
|
static void mmc_omap_start_request(struct mmc_omap_host *host,
|
|
struct mmc_request *req)
|
|
{
|
|
BUG_ON(host->mrq != NULL);
|
|
|
|
host->mrq = req;
|
|
|
|
/* only touch fifo AFTER the controller readies it */
|
|
mmc_omap_prepare_data(host, req);
|
|
mmc_omap_start_command(host, req->cmd);
|
|
if (host->dma_in_use) {
|
|
struct dma_chan *c = host->data->flags & MMC_DATA_WRITE ?
|
|
host->dma_tx : host->dma_rx;
|
|
|
|
dma_async_issue_pending(c);
|
|
}
|
|
}
|
|
|
|
static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct mmc_omap_slot *slot = mmc_priv(mmc);
|
|
struct mmc_omap_host *host = slot->host;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->slot_lock, flags);
|
|
if (host->mmc != NULL) {
|
|
BUG_ON(slot->mrq != NULL);
|
|
slot->mrq = req;
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
return;
|
|
} else
|
|
host->mmc = mmc;
|
|
spin_unlock_irqrestore(&host->slot_lock, flags);
|
|
mmc_omap_select_slot(slot, 1);
|
|
mmc_omap_start_request(host, req);
|
|
}
|
|
|
|
static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
|
|
int vdd)
|
|
{
|
|
struct mmc_omap_host *host;
|
|
|
|
host = slot->host;
|
|
|
|
if (slot->pdata->set_power != NULL)
|
|
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
|
|
vdd);
|
|
if (mmc_omap2()) {
|
|
u16 w;
|
|
|
|
if (power_on) {
|
|
w = OMAP_MMC_READ(host, CON);
|
|
OMAP_MMC_WRITE(host, CON, w | (1 << 11));
|
|
} else {
|
|
w = OMAP_MMC_READ(host, CON);
|
|
OMAP_MMC_WRITE(host, CON, w & ~(1 << 11));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mmc_omap_calc_divisor(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct mmc_omap_slot *slot = mmc_priv(mmc);
|
|
struct mmc_omap_host *host = slot->host;
|
|
int func_clk_rate = clk_get_rate(host->fclk);
|
|
int dsor;
|
|
|
|
if (ios->clock == 0)
|
|
return 0;
|
|
|
|
dsor = func_clk_rate / ios->clock;
|
|
if (dsor < 1)
|
|
dsor = 1;
|
|
|
|
if (func_clk_rate / dsor > ios->clock)
|
|
dsor++;
|
|
|
|
if (dsor > 250)
|
|
dsor = 250;
|
|
|
|
slot->fclk_freq = func_clk_rate / dsor;
|
|
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
dsor |= 1 << 15;
|
|
|
|
return dsor;
|
|
}
|
|
|
|
static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct mmc_omap_slot *slot = mmc_priv(mmc);
|
|
struct mmc_omap_host *host = slot->host;
|
|
int i, dsor;
|
|
int clk_enabled;
|
|
|
|
mmc_omap_select_slot(slot, 0);
|
|
|
|
dsor = mmc_omap_calc_divisor(mmc, ios);
|
|
|
|
if (ios->vdd != slot->vdd)
|
|
slot->vdd = ios->vdd;
|
|
|
|
clk_enabled = 0;
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
mmc_omap_set_power(slot, 0, ios->vdd);
|
|
break;
|
|
case MMC_POWER_UP:
|
|
/* Cannot touch dsor yet, just power up MMC */
|
|
mmc_omap_set_power(slot, 1, ios->vdd);
|
|
goto exit;
|
|
case MMC_POWER_ON:
|
|
mmc_omap_fclk_enable(host, 1);
|
|
clk_enabled = 1;
|
|
dsor |= 1 << 11;
|
|
break;
|
|
}
|
|
|
|
if (slot->bus_mode != ios->bus_mode) {
|
|
if (slot->pdata->set_bus_mode != NULL)
|
|
slot->pdata->set_bus_mode(mmc_dev(mmc), slot->id,
|
|
ios->bus_mode);
|
|
slot->bus_mode = ios->bus_mode;
|
|
}
|
|
|
|
/* On insanely high arm_per frequencies something sometimes
|
|
* goes somehow out of sync, and the POW bit is not being set,
|
|
* which results in the while loop below getting stuck.
|
|
* Writing to the CON register twice seems to do the trick. */
|
|
for (i = 0; i < 2; i++)
|
|
OMAP_MMC_WRITE(host, CON, dsor);
|
|
slot->saved_con = dsor;
|
|
if (ios->power_mode == MMC_POWER_ON) {
|
|
/* worst case at 400kHz, 80 cycles makes 200 microsecs */
|
|
int usecs = 250;
|
|
|
|
/* Send clock cycles, poll completion */
|
|
OMAP_MMC_WRITE(host, IE, 0);
|
|
OMAP_MMC_WRITE(host, STAT, 0xffff);
|
|
OMAP_MMC_WRITE(host, CMD, 1 << 7);
|
|
while (usecs > 0 && (OMAP_MMC_READ(host, STAT) & 1) == 0) {
|
|
udelay(1);
|
|
usecs--;
|
|
}
|
|
OMAP_MMC_WRITE(host, STAT, 1);
|
|
}
|
|
|
|
exit:
|
|
mmc_omap_release_slot(slot, clk_enabled);
|
|
}
|
|
|
|
static const struct mmc_host_ops mmc_omap_ops = {
|
|
.request = mmc_omap_request,
|
|
.set_ios = mmc_omap_set_ios,
|
|
};
|
|
|
|
static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
|
|
{
|
|
struct mmc_omap_slot *slot = NULL;
|
|
struct mmc_host *mmc;
|
|
int r;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct mmc_omap_slot), host->dev);
|
|
if (mmc == NULL)
|
|
return -ENOMEM;
|
|
|
|
slot = mmc_priv(mmc);
|
|
slot->host = host;
|
|
slot->mmc = mmc;
|
|
slot->id = id;
|
|
slot->pdata = &host->pdata->slots[id];
|
|
|
|
host->slots[id] = slot;
|
|
|
|
mmc->caps = 0;
|
|
if (host->pdata->slots[id].wires >= 4)
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE;
|
|
|
|
mmc->ops = &mmc_omap_ops;
|
|
mmc->f_min = 400000;
|
|
|
|
if (mmc_omap2())
|
|
mmc->f_max = 48000000;
|
|
else
|
|
mmc->f_max = 24000000;
|
|
if (host->pdata->max_freq)
|
|
mmc->f_max = min(host->pdata->max_freq, mmc->f_max);
|
|
mmc->ocr_avail = slot->pdata->ocr_mask;
|
|
|
|
/* Use scatterlist DMA to reduce per-transfer costs.
|
|
* NOTE max_seg_size assumption that small blocks aren't
|
|
* normally used (except e.g. for reading SD registers).
|
|
*/
|
|
mmc->max_segs = 32;
|
|
mmc->max_blk_size = 2048; /* BLEN is 11 bits (+1) */
|
|
mmc->max_blk_count = 2048; /* NBLK is 11 bits (+1) */
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
if (slot->pdata->get_cover_state != NULL) {
|
|
setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
|
|
(unsigned long)slot);
|
|
tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
|
|
(unsigned long)slot);
|
|
}
|
|
|
|
r = mmc_add_host(mmc);
|
|
if (r < 0)
|
|
goto err_remove_host;
|
|
|
|
if (slot->pdata->name != NULL) {
|
|
r = device_create_file(&mmc->class_dev,
|
|
&dev_attr_slot_name);
|
|
if (r < 0)
|
|
goto err_remove_host;
|
|
}
|
|
|
|
if (slot->pdata->get_cover_state != NULL) {
|
|
r = device_create_file(&mmc->class_dev,
|
|
&dev_attr_cover_switch);
|
|
if (r < 0)
|
|
goto err_remove_slot_name;
|
|
tasklet_schedule(&slot->cover_tasklet);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_remove_slot_name:
|
|
if (slot->pdata->name != NULL)
|
|
device_remove_file(&mmc->class_dev, &dev_attr_slot_name);
|
|
err_remove_host:
|
|
mmc_remove_host(mmc);
|
|
mmc_free_host(mmc);
|
|
return r;
|
|
}
|
|
|
|
static void mmc_omap_remove_slot(struct mmc_omap_slot *slot)
|
|
{
|
|
struct mmc_host *mmc = slot->mmc;
|
|
|
|
if (slot->pdata->name != NULL)
|
|
device_remove_file(&mmc->class_dev, &dev_attr_slot_name);
|
|
if (slot->pdata->get_cover_state != NULL)
|
|
device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
|
|
|
|
tasklet_kill(&slot->cover_tasklet);
|
|
del_timer_sync(&slot->cover_timer);
|
|
flush_workqueue(slot->host->mmc_omap_wq);
|
|
|
|
mmc_remove_host(mmc);
|
|
mmc_free_host(mmc);
|
|
}
|
|
|
|
static int mmc_omap_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
|
|
struct mmc_omap_host *host = NULL;
|
|
struct resource *res;
|
|
dma_cap_mask_t mask;
|
|
unsigned sig = 0;
|
|
int i, ret = 0;
|
|
int irq;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&pdev->dev, "platform data missing\n");
|
|
return -ENXIO;
|
|
}
|
|
if (pdata->nr_slots == 0) {
|
|
dev_err(&pdev->dev, "no slots\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
host = devm_kzalloc(&pdev->dev, sizeof(struct mmc_omap_host),
|
|
GFP_KERNEL);
|
|
if (host == NULL)
|
|
return -ENOMEM;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->virt_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->virt_base))
|
|
return PTR_ERR(host->virt_base);
|
|
|
|
INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
|
|
INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
|
|
|
|
INIT_WORK(&host->cmd_abort_work, mmc_omap_abort_command);
|
|
setup_timer(&host->cmd_abort_timer, mmc_omap_cmd_timer,
|
|
(unsigned long) host);
|
|
|
|
spin_lock_init(&host->clk_lock);
|
|
setup_timer(&host->clk_timer, mmc_omap_clk_timer, (unsigned long) host);
|
|
|
|
spin_lock_init(&host->dma_lock);
|
|
spin_lock_init(&host->slot_lock);
|
|
init_waitqueue_head(&host->slot_wq);
|
|
|
|
host->pdata = pdata;
|
|
host->features = host->pdata->slots[0].features;
|
|
host->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
host->id = pdev->id;
|
|
host->irq = irq;
|
|
host->phys_base = res->start;
|
|
host->iclk = clk_get(&pdev->dev, "ick");
|
|
if (IS_ERR(host->iclk))
|
|
return PTR_ERR(host->iclk);
|
|
clk_enable(host->iclk);
|
|
|
|
host->fclk = clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(host->fclk)) {
|
|
ret = PTR_ERR(host->fclk);
|
|
goto err_free_iclk;
|
|
}
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
host->dma_tx_burst = -1;
|
|
host->dma_rx_burst = -1;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
|
|
if (res)
|
|
sig = res->start;
|
|
host->dma_tx = dma_request_slave_channel_compat(mask,
|
|
omap_dma_filter_fn, &sig, &pdev->dev, "tx");
|
|
if (!host->dma_tx)
|
|
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
|
|
sig);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
|
|
if (res)
|
|
sig = res->start;
|
|
host->dma_rx = dma_request_slave_channel_compat(mask,
|
|
omap_dma_filter_fn, &sig, &pdev->dev, "rx");
|
|
if (!host->dma_rx)
|
|
dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n",
|
|
sig);
|
|
|
|
ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host);
|
|
if (ret)
|
|
goto err_free_dma;
|
|
|
|
if (pdata->init != NULL) {
|
|
ret = pdata->init(&pdev->dev);
|
|
if (ret < 0)
|
|
goto err_free_irq;
|
|
}
|
|
|
|
host->nr_slots = pdata->nr_slots;
|
|
host->reg_shift = (mmc_omap7xx() ? 1 : 2);
|
|
|
|
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
|
|
if (!host->mmc_omap_wq)
|
|
goto err_plat_cleanup;
|
|
|
|
for (i = 0; i < pdata->nr_slots; i++) {
|
|
ret = mmc_omap_new_slot(host, i);
|
|
if (ret < 0) {
|
|
while (--i >= 0)
|
|
mmc_omap_remove_slot(host->slots[i]);
|
|
|
|
goto err_destroy_wq;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_destroy_wq:
|
|
destroy_workqueue(host->mmc_omap_wq);
|
|
err_plat_cleanup:
|
|
if (pdata->cleanup)
|
|
pdata->cleanup(&pdev->dev);
|
|
err_free_irq:
|
|
free_irq(host->irq, host);
|
|
err_free_dma:
|
|
if (host->dma_tx)
|
|
dma_release_channel(host->dma_tx);
|
|
if (host->dma_rx)
|
|
dma_release_channel(host->dma_rx);
|
|
clk_put(host->fclk);
|
|
err_free_iclk:
|
|
clk_disable(host->iclk);
|
|
clk_put(host->iclk);
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_omap_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
BUG_ON(host == NULL);
|
|
|
|
for (i = 0; i < host->nr_slots; i++)
|
|
mmc_omap_remove_slot(host->slots[i]);
|
|
|
|
if (host->pdata->cleanup)
|
|
host->pdata->cleanup(&pdev->dev);
|
|
|
|
mmc_omap_fclk_enable(host, 0);
|
|
free_irq(host->irq, host);
|
|
clk_put(host->fclk);
|
|
clk_disable(host->iclk);
|
|
clk_put(host->iclk);
|
|
|
|
if (host->dma_tx)
|
|
dma_release_channel(host->dma_tx);
|
|
if (host->dma_rx)
|
|
dma_release_channel(host->dma_rx);
|
|
|
|
destroy_workqueue(host->mmc_omap_wq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_BUILTIN(CONFIG_OF)
|
|
static const struct of_device_id mmc_omap_match[] = {
|
|
{ .compatible = "ti,omap2420-mmc", },
|
|
{ },
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver mmc_omap_driver = {
|
|
.probe = mmc_omap_probe,
|
|
.remove = mmc_omap_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(mmc_omap_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mmc_omap_driver);
|
|
MODULE_DESCRIPTION("OMAP Multimedia Card driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
MODULE_AUTHOR("Juha Yrjölä");
|