linux/drivers/media/dvb/b2c2/flexcop.c
Adrian Bunk 6fce7fcd6d V4L/DVB (6573): unexport flexcop_reset_block_300
This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:02:04 -02:00

311 lines
8.4 KiB
C

/*
* flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
*
* based on the skystar2-driver
* Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
*
* Acknowledgements:
* John Jurrius from BBTI, Inc. for extensive support with
* code examples and data books
*
* Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
*
* Contributions to the skystar2-driver have been done by
* Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
* Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
* Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "flexcop.h"
#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define DEBSTATUS ""
#else
#define DEBSTATUS " (debugging is not enabled)"
#endif
int b2c2_flexcop_debug;
module_param_named(debug, b2c2_flexcop_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS);
#undef DEBSTATUS
/* global zero for ibi values */
flexcop_ibi_value ibi_zero;
static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
}
static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
}
static int flexcop_dvb_init(struct flexcop_device *fc)
{
int ret;
if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner,fc->dev)) < 0) {
err("error registering DVB adapter");
return ret;
}
fc->dvb_adapter.priv = fc;
fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
fc->demux.priv = fc;
fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
fc->demux.start_feed = flexcop_dvb_start_feed;
fc->demux.stop_feed = flexcop_dvb_stop_feed;
fc->demux.write_to_decoder = NULL;
if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
err("dvb_dmx failed: error %d",ret);
goto err_dmx;
}
fc->hw_frontend.source = DMX_FRONTEND_0;
fc->dmxdev.filternum = fc->demux.feednum;
fc->dmxdev.demux = &fc->demux.dmx;
fc->dmxdev.capabilities = 0;
if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
err("dvb_dmxdev_init failed: error %d",ret);
goto err_dmx_dev;
}
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
err("adding hw_frontend to dmx failed: error %d",ret);
goto err_dmx_add_hw_frontend;
}
fc->mem_frontend.source = DMX_MEMORY_FE;
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
err("adding mem_frontend to dmx failed: error %d",ret);
goto err_dmx_add_mem_frontend;
}
if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
err("connect frontend failed: error %d",ret);
goto err_connect_frontend;
}
dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
fc->init_state |= FC_STATE_DVB_INIT;
return 0;
err_connect_frontend:
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
err_dmx_add_mem_frontend:
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
err_dmx_add_hw_frontend:
dvb_dmxdev_release(&fc->dmxdev);
err_dmx_dev:
dvb_dmx_release(&fc->demux);
err_dmx:
dvb_unregister_adapter(&fc->dvb_adapter);
return ret;
}
static void flexcop_dvb_exit(struct flexcop_device *fc)
{
if (fc->init_state & FC_STATE_DVB_INIT) {
dvb_net_release(&fc->dvbnet);
fc->demux.dmx.close(&fc->demux.dmx);
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
dvb_dmxdev_release(&fc->dmxdev);
dvb_dmx_release(&fc->demux);
dvb_unregister_adapter(&fc->dvb_adapter);
deb_info("deinitialized dvb stuff\n");
}
fc->init_state &= ~FC_STATE_DVB_INIT;
}
/* these methods are necessary to achieve the long-term-goal of hiding the
* struct flexcop_device from the bus-parts */
void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
{
dvb_dmx_swfilter(&fc->demux, buf, len);
}
EXPORT_SYMBOL(flexcop_pass_dmx_data);
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
{
dvb_dmx_swfilter_packets(&fc->demux, buf, no);
}
EXPORT_SYMBOL(flexcop_pass_dmx_packets);
static void flexcop_reset(struct flexcop_device *fc)
{
flexcop_ibi_value v210,v204;
/* reset the flexcop itself */
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
v210.raw = 0;
v210.sw_reset_210.reset_block_000 = 1;
v210.sw_reset_210.reset_block_100 = 1;
v210.sw_reset_210.reset_block_200 = 1;
v210.sw_reset_210.reset_block_300 = 1;
v210.sw_reset_210.reset_block_400 = 1;
v210.sw_reset_210.reset_block_500 = 1;
v210.sw_reset_210.reset_block_600 = 1;
v210.sw_reset_210.reset_block_700 = 1;
v210.sw_reset_210.Block_reset_enable = 0xb2;
v210.sw_reset_210.Special_controls = 0xc259;
fc->write_ibi_reg(fc,sw_reset_210,v210);
msleep(1);
/* reset the periphical devices */
v204 = fc->read_ibi_reg(fc,misc_204);
v204.misc_204.Per_reset_sig = 0;
fc->write_ibi_reg(fc,misc_204,v204);
msleep(1);
v204.misc_204.Per_reset_sig = 1;
fc->write_ibi_reg(fc,misc_204,v204);
}
void flexcop_reset_block_300(struct flexcop_device *fc)
{
flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208),
v210 = fc->read_ibi_reg(fc,sw_reset_210);
deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw);
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
v210.sw_reset_210.reset_block_300 = 1;
v210.sw_reset_210.Block_reset_enable = 0xb2;
fc->write_ibi_reg(fc,sw_reset_210,v210);
msleep(1);
fc->write_ibi_reg(fc,ctrl_208,v208_save);
}
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
{
void *bus;
struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), GFP_KERNEL);
if (!fc) {
err("no memory");
return NULL;
}
bus = kzalloc(bus_specific_len, GFP_KERNEL);
if (!bus) {
err("no memory");
kfree(fc);
return NULL;
}
fc->bus_specific = bus;
return fc;
}
EXPORT_SYMBOL(flexcop_device_kmalloc);
void flexcop_device_kfree(struct flexcop_device *fc)
{
kfree(fc->bus_specific);
kfree(fc);
}
EXPORT_SYMBOL(flexcop_device_kfree);
int flexcop_device_initialize(struct flexcop_device *fc)
{
int ret;
ibi_zero.raw = 0;
flexcop_reset(fc);
flexcop_determine_revision(fc);
flexcop_sram_init(fc);
flexcop_hw_filter_init(fc);
flexcop_smc_ctrl(fc, 0);
if ((ret = flexcop_dvb_init(fc)))
goto error;
/* do the MAC address reading after initializing the dvb_adapter */
if (fc->get_mac_addr(fc, 0) == 0) {
u8 *b = fc->dvb_adapter.proposed_mac;
info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]);
flexcop_set_mac_filter(fc,b);
flexcop_mac_filter_ctrl(fc,1);
} else
warn("reading of MAC address failed.\n");
if ((ret = flexcop_i2c_init(fc)))
goto error;
if ((ret = flexcop_frontend_init(fc)))
goto error;
flexcop_device_name(fc,"initialization of","complete");
return 0;
error:
flexcop_device_exit(fc);
return ret;
}
EXPORT_SYMBOL(flexcop_device_initialize);
void flexcop_device_exit(struct flexcop_device *fc)
{
flexcop_frontend_exit(fc);
flexcop_i2c_exit(fc);
flexcop_dvb_exit(fc);
}
EXPORT_SYMBOL(flexcop_device_exit);
static int flexcop_module_init(void)
{
info(DRIVER_NAME " loaded successfully");
return 0;
}
static void flexcop_module_cleanup(void)
{
info(DRIVER_NAME " unloaded successfully");
}
module_init(flexcop_module_init);
module_exit(flexcop_module_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_NAME);
MODULE_LICENSE("GPL");