OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
2bf2154c6b
linux/arch/mips/au1000/common/au1xxx_irqmap.c
Pete Popov e3ad1c23ba Base Au1200 2.6 support. 
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:47 +01:00

225 lines
9.2 KiB
C
Raw Blame History

/*
* BRIEF MODULE DESCRIPTION
* Au1xxx processor specific IRQ tables
*
* Copyright 2004 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
/* The IC0 interrupt table. This is processor, rather than
* board dependent, so no reason to keep this info in the board
* dependent files.
*
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
au1xxx_irq_map_t au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
{ AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
{ AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
/*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
{ AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#elif defined(CONFIG_SOC_AU1200)
{ AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
#else
#error "Error: Unknown Alchemy SOC"
#endif
};
int au1xxx_ic0_nr_irqs = sizeof(au1xxx_ic0_map)/sizeof(au1xxx_irq_map_t);
Reference in New Issue View Git Blame Copy Permalink