Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit |
||
---|---|---|
.. | ||
netfilter | ||
Kconfig | ||
Makefile | ||
br.c | ||
br_device.c | ||
br_fdb.c | ||
br_forward.c | ||
br_if.c | ||
br_input.c | ||
br_ioctl.c | ||
br_mdb.c | ||
br_multicast.c | ||
br_netfilter_hooks.c | ||
br_netfilter_ipv6.c | ||
br_netlink.c | ||
br_nf_core.c | ||
br_private.h | ||
br_private_stp.h | ||
br_stp.c | ||
br_stp_bpdu.c | ||
br_stp_if.c | ||
br_stp_timer.c | ||
br_switchdev.c | ||
br_sysfs_br.c | ||
br_sysfs_if.c | ||
br_vlan.c |