linux/net/mac80211
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
..
Kconfig Driver core patches for 3.9-rc1 2013-02-21 12:05:51 -08:00
Makefile mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
aes_ccm.c
aes_ccm.h
aes_cmac.c
aes_cmac.h
agg-rx.c mac80211: improve aggregation debug messages 2013-01-18 21:55:15 +01:00
agg-tx.c mac80211: fix aggregation state with current drivers 2013-01-24 15:43:51 +01:00
cfg.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
cfg.h
chan.c mac80211: add ieee80211_vif_change_bandwidth 2013-02-15 09:41:36 +01:00
debug.h mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs.c mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE 2013-02-11 18:45:01 +01:00
debugfs.h
debugfs_key.c mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
debugfs_key.h
debugfs_netdev.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_netdev.h
debugfs_sta.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_sta.h
driver-ops.h mac80211: don't call bss_info_changed on p2p-device/monitor 2013-02-15 09:41:11 +01:00
event.c
ht.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
ibss.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
ieee80211_i.h mac80211: cache mesh beacon 2013-02-15 09:41:40 +01:00
iface.c mac80211: fix harmless station flush warning 2013-02-18 13:48:40 +01:00
key.c mac80211: add op to configure default key id 2013-01-18 13:30:21 +01:00
key.h mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
led.c
led.h
main.c mac80211: convert to idr_alloc() 2013-02-27 19:10:20 -08:00
mesh.c mac80211: don't spam mesh probe response messages 2013-02-18 15:31:24 +01:00
mesh.h mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_hwmp.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_pathtbl.c hlist: drop the node parameter from iterators 2013-02-27 19:10:24 -08:00
mesh_plink.c mac80211: stringify mesh peering events 2013-02-18 15:31:23 +01:00
mesh_ps.c mac80211: consolidate MBSS change notification 2013-02-15 09:41:09 +01:00
mesh_sync.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
michael.c
michael.h
mlme.c mac80211: prevent spurious HT/VHT downgrade message 2013-02-15 09:41:45 +01:00
offchannel.c mac80211: Add flushes before going off-channel 2013-02-11 22:52:21 +01:00
pm.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
rate.c mac80211: convert to channel definition struct 2012-11-26 12:42:59 +01:00
rate.h mac80211: track number of spatial streams 2013-02-15 09:41:31 +01:00
rc80211_minstrel.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_debugfs.c
rc80211_minstrel_ht.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
rc80211_minstrel_ht.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_ht_debugfs.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_pid.h
rc80211_pid_algo.c
rc80211_pid_debugfs.c
rx.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
scan.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
spectmgmt.c
sta_info.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
sta_info.h mac80211: clean up mesh HT operation 2013-02-18 15:31:23 +01:00
status.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
tkip.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
tkip.h
trace.c
trace.h mac80211: Fix incorrect use of STA_PR_FMT in trace points 2013-02-15 20:25:11 +01:00
tx.c mac80211: convert to idr_alloc() 2013-02-27 19:10:20 -08:00
util.c mac80211: constify IE parsing 2013-02-15 09:41:39 +01:00
vht.c mac80211: constify IE parsing 2013-02-15 09:41:39 +01:00
wep.c
wep.h
wme.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
wme.h
wpa.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
wpa.h