linux/arch/arm/mach-mxs/mach-tx28.c

185 lines
5.0 KiB
C

/*
* Copyright (C) 2010 <LW@KARO-electronics.de>
*
* based on: mach-mx28_evk.c
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#include "module-tx28.h"
#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10)
static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
/* LED */
MX28_PAD_ENET0_RXD3__GPIO_4_10 |
MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
/* framebuffer */
#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
MX28_PAD_PWM0__PWM_0 | LCD_MODE,
/* UART1 */
MX28_PAD_AUART0_CTS__DUART_RX,
MX28_PAD_AUART0_RTS__DUART_TX,
MX28_PAD_AUART0_TX__DUART_RTS,
MX28_PAD_AUART0_RX__DUART_CTS,
/* UART2 */
MX28_PAD_AUART1_RX__AUART1_RX,
MX28_PAD_AUART1_TX__AUART1_TX,
MX28_PAD_AUART1_RTS__AUART1_RTS,
MX28_PAD_AUART1_CTS__AUART1_CTS,
/* CAN */
MX28_PAD_GPMI_RDY2__CAN0_TX,
MX28_PAD_GPMI_RDY3__CAN0_RX,
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
/* TSC2007 */
MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
/* MMC0 */
MX28_PAD_SSP0_DATA0__SSP0_D0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA1__SSP0_D1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA2__SSP0_D2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA3__SSP0_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_CMD__SSP0_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
{
.name = "GPIO-LED",
.default_trigger = "heartbeat",
.gpio = TX28_STK5_GPIO_LED,
},
};
static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
.leds = tx28_stk5v3_leds,
.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
};
static struct spi_board_info tx28_spi_board_info[] = {
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
.mode = SPI_MODE_0,
},
};
static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
{
I2C_BOARD_INFO("ds1339", 0x68),
},
};
static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
.wp_gpio = -EINVAL,
.flags = SLOTF_4_BIT_CAPABLE,
};
static void __init tx28_stk5v3_init(void)
{
mx28_soc_init();
mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
ARRAY_SIZE(tx28_stk5v3_pads));
mx28_add_duart(); /* UART1 */
mx28_add_auart(1); /* UART2 */
tx28_add_fec0();
/* spi via ssp will be added when available */
spi_register_board_info(tx28_spi_board_info,
ARRAY_SIZE(tx28_spi_board_info));
gpio_led_register_device(0, &tx28_stk5v3_led_data);
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
mx28_add_rtc_stmp3xxx();
}
static void __init tx28_timer_init(void)
{
mx28_clocks_init();
}
static struct sys_timer tx28_timer = {
.init = tx28_timer_init,
};
MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.timer = &tx28_timer,
.init_machine = tx28_stk5v3_init,
.restart = mxs_restart,
MACHINE_END