linux/arch/arm/mach-pnx4008/include/mach/clock.h

63 lines
2.2 KiB
C

/*
* arch/arm/mach-pnx4008/include/mach/clock.h
*
* Clock control driver for PNX4008 - header file
*
* Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __PNX4008_CLOCK_H__
#define __PNX4008_CLOCK_H__
struct module;
struct clk;
#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40)
#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44)
#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48)
#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c)
#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50)
#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58)
#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64)
#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68)
#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80)
#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84)
#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90)
#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac)
#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0)
#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4)
#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8)
#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc)
#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4)
#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8)
#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0)
#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4)
#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8)
#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec)
#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc)
#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60)
#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64)
#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68)
#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C)
#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE)
#define CLK_RATE_13MHZ 13000
#define CLK_RATE_1MHZ 1000
#define CLK_RATE_208MHZ 208000
#define CLK_RATE_48MHZ 48000
#define CLK_RATE_32KHZ 32
#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
#endif