1406 lines
33 KiB
C
1406 lines
33 KiB
C
/*
|
|
* DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
|
|
*
|
|
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* TODO:
|
|
* - add smart card reader support for Conditional Access (CA)
|
|
*
|
|
* Card reader in Anysee is nothing more than ISO 7816 card reader.
|
|
* There is no hardware CAM in any Anysee device sold.
|
|
* In my understanding it should be implemented by making own module
|
|
* for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
|
|
* module registers serial interface that can be used to communicate
|
|
* with any ISO 7816 smart card.
|
|
*
|
|
* Any help according to implement serial smart card reader support
|
|
* is highly welcome!
|
|
*/
|
|
|
|
#include "anysee.h"
|
|
#include "tda1002x.h"
|
|
#include "mt352.h"
|
|
#include "mt352_priv.h"
|
|
#include "zl10353.h"
|
|
#include "tda18212.h"
|
|
#include "cx24116.h"
|
|
#include "stv0900.h"
|
|
#include "stv6110.h"
|
|
#include "isl6423.h"
|
|
#include "cxd2820r.h"
|
|
|
|
/* debug */
|
|
static int dvb_usb_anysee_debug;
|
|
module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
|
|
static int dvb_usb_anysee_delsys;
|
|
module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
|
|
MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
static DEFINE_MUTEX(anysee_usb_mutex);
|
|
|
|
static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
|
|
u8 *rbuf, u8 rlen)
|
|
{
|
|
struct anysee_state *state = d->priv;
|
|
int act_len, ret;
|
|
u8 buf[64];
|
|
|
|
memcpy(&buf[0], sbuf, slen);
|
|
buf[60] = state->seq++;
|
|
|
|
if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
deb_xfer(">>> ");
|
|
debug_dump(buf, slen, deb_xfer);
|
|
|
|
/* We need receive one message more after dvb_usb_generic_rw due
|
|
to weird transaction flow, which is 1 x send + 2 x receive. */
|
|
ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
|
|
if (!ret) {
|
|
/* receive 2nd answer */
|
|
ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
|
|
d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
|
|
&act_len, 2000);
|
|
if (ret)
|
|
err("%s: recv bulk message failed: %d", __func__, ret);
|
|
else {
|
|
deb_xfer("<<< ");
|
|
debug_dump(buf, rlen, deb_xfer);
|
|
|
|
if (buf[63] != 0x4f)
|
|
deb_info("%s: cmd failed\n", __func__);
|
|
}
|
|
}
|
|
|
|
/* read request, copy returned data to return buf */
|
|
if (!ret && rbuf && rlen)
|
|
memcpy(rbuf, buf, rlen);
|
|
|
|
mutex_unlock(&anysee_usb_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
|
|
{
|
|
u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
|
|
int ret;
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
|
|
deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
|
|
{
|
|
u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
|
|
deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
|
|
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
|
}
|
|
|
|
/* write single register with mask */
|
|
static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
|
|
u8 mask)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
/* no need for read if whole reg is written */
|
|
if (mask != 0xff) {
|
|
ret = anysee_read_reg(d, reg, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
|
|
return anysee_write_reg(d, reg, val);
|
|
}
|
|
|
|
/* read single register with mask */
|
|
static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
|
|
u8 mask)
|
|
{
|
|
int ret, i;
|
|
u8 tmp;
|
|
|
|
ret = anysee_read_reg(d, reg, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp &= mask;
|
|
|
|
/* find position of the first bit */
|
|
for (i = 0; i < 8; i++) {
|
|
if ((mask >> i) & 0x01)
|
|
break;
|
|
}
|
|
*val = tmp >> i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
|
|
{
|
|
u8 buf[] = {CMD_GET_HW_INFO};
|
|
return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
|
|
}
|
|
|
|
static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
|
|
deb_info("%s: onoff:%02x\n", __func__, onoff);
|
|
return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
|
|
}
|
|
|
|
static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
|
|
{
|
|
u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
|
|
deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
|
|
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
|
}
|
|
|
|
static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
|
|
{
|
|
u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
|
|
deb_info("%s: onoff:%02x\n", __func__, onoff);
|
|
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
|
}
|
|
|
|
/* I2C */
|
|
static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int ret = 0, inc, i = 0;
|
|
u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
|
|
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
while (i < num) {
|
|
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
|
|
if (msg[i].len > 2 || msg[i+1].len > 60) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
buf[0] = CMD_I2C_READ;
|
|
buf[1] = (msg[i].addr << 1) | 0x01;
|
|
buf[2] = msg[i].buf[0];
|
|
buf[3] = msg[i].buf[1];
|
|
buf[4] = msg[i].len-1;
|
|
buf[5] = msg[i+1].len;
|
|
ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
|
|
msg[i+1].len);
|
|
inc = 2;
|
|
} else {
|
|
if (msg[i].len > 48) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
buf[0] = CMD_I2C_WRITE;
|
|
buf[1] = (msg[i].addr << 1);
|
|
buf[2] = msg[i].len;
|
|
buf[3] = 0x01;
|
|
memcpy(&buf[4], msg[i].buf, msg[i].len);
|
|
ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
|
|
inc = 1;
|
|
}
|
|
if (ret)
|
|
break;
|
|
|
|
i += inc;
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
|
|
return ret ? ret : i;
|
|
}
|
|
|
|
static u32 anysee_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm anysee_i2c_algo = {
|
|
.master_xfer = anysee_master_xfer,
|
|
.functionality = anysee_i2c_func,
|
|
};
|
|
|
|
static int anysee_mt352_demod_init(struct dvb_frontend *fe)
|
|
{
|
|
static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 };
|
|
static u8 reset[] = { RESET, 0x80 };
|
|
static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
|
|
static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 };
|
|
static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 };
|
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
|
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config));
|
|
udelay(200);
|
|
mt352_write(fe, reset, sizeof(reset));
|
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
|
|
|
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
|
|
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
|
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Callbacks for DVB USB */
|
|
static struct tda10023_config anysee_tda10023_config = {
|
|
.demod_address = (0x1a >> 1),
|
|
.invert = 0,
|
|
.xtal = 16000000,
|
|
.pll_m = 11,
|
|
.pll_p = 3,
|
|
.pll_n = 1,
|
|
.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
|
|
.deltaf = 0xfeeb,
|
|
};
|
|
|
|
static struct mt352_config anysee_mt352_config = {
|
|
.demod_address = (0x1e >> 1),
|
|
.demod_init = anysee_mt352_demod_init,
|
|
};
|
|
|
|
static struct zl10353_config anysee_zl10353_config = {
|
|
.demod_address = (0x1e >> 1),
|
|
.parallel_ts = 1,
|
|
};
|
|
|
|
static struct zl10353_config anysee_zl10353_tda18212_config2 = {
|
|
.demod_address = (0x1e >> 1),
|
|
.parallel_ts = 1,
|
|
.disable_i2c_gate_ctrl = 1,
|
|
.no_tuner = 1,
|
|
.if2 = 41500,
|
|
};
|
|
|
|
static struct zl10353_config anysee_zl10353_tda18212_config = {
|
|
.demod_address = (0x18 >> 1),
|
|
.parallel_ts = 1,
|
|
.disable_i2c_gate_ctrl = 1,
|
|
.no_tuner = 1,
|
|
.if2 = 41500,
|
|
};
|
|
|
|
static struct tda10023_config anysee_tda10023_tda18212_config = {
|
|
.demod_address = (0x1a >> 1),
|
|
.xtal = 16000000,
|
|
.pll_m = 12,
|
|
.pll_p = 3,
|
|
.pll_n = 1,
|
|
.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
|
|
.deltaf = 0xba02,
|
|
};
|
|
|
|
static struct tda18212_config anysee_tda18212_config = {
|
|
.i2c_address = (0xc0 >> 1),
|
|
.if_dvbt_6 = 4150,
|
|
.if_dvbt_7 = 4150,
|
|
.if_dvbt_8 = 4150,
|
|
.if_dvbc = 5000,
|
|
};
|
|
|
|
static struct tda18212_config anysee_tda18212_config2 = {
|
|
.i2c_address = 0x60 /* (0xc0 >> 1) */,
|
|
.if_dvbt_6 = 3550,
|
|
.if_dvbt_7 = 3700,
|
|
.if_dvbt_8 = 4150,
|
|
.if_dvbt2_6 = 3250,
|
|
.if_dvbt2_7 = 4000,
|
|
.if_dvbt2_8 = 4000,
|
|
.if_dvbc = 5000,
|
|
};
|
|
|
|
static struct cx24116_config anysee_cx24116_config = {
|
|
.demod_address = (0xaa >> 1),
|
|
.mpg_clk_pos_pol = 0x00,
|
|
.i2c_wr_max = 48,
|
|
};
|
|
|
|
static struct stv0900_config anysee_stv0900_config = {
|
|
.demod_address = (0xd0 >> 1),
|
|
.demod_mode = 0,
|
|
.xtal = 8000000,
|
|
.clkmode = 3,
|
|
.diseqc_mode = 2,
|
|
.tun1_maddress = 0,
|
|
.tun1_adc = 1, /* 1 Vpp */
|
|
.path1_mode = 3,
|
|
};
|
|
|
|
static struct stv6110_config anysee_stv6110_config = {
|
|
.i2c_address = (0xc0 >> 1),
|
|
.mclk = 16000000,
|
|
.clk_div = 1,
|
|
};
|
|
|
|
static struct isl6423_config anysee_isl6423_config = {
|
|
.current_max = SEC_CURRENT_800m,
|
|
.curlim = SEC_CURRENT_LIM_OFF,
|
|
.mod_extern = 1,
|
|
.addr = (0x10 >> 1),
|
|
};
|
|
|
|
static struct cxd2820r_config anysee_cxd2820r_config = {
|
|
.i2c_address = 0x6d, /* (0xda >> 1) */
|
|
.ts_mode = 0x38,
|
|
.if_dvbt_6 = 3550,
|
|
.if_dvbt_7 = 3700,
|
|
.if_dvbt_8 = 4150,
|
|
.if_dvbt2_6 = 3250,
|
|
.if_dvbt2_7 = 4000,
|
|
.if_dvbt2_8 = 4000,
|
|
.if_dvbc = 5000,
|
|
};
|
|
|
|
/*
|
|
* New USB device strings: Mfr=1, Product=2, SerialNumber=0
|
|
* Manufacturer: AMT.CO.KR
|
|
*
|
|
* E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
|
|
* PCB: ?
|
|
* parts: DNOS404ZH102A(MT352, DTT7579(?))
|
|
*
|
|
* E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
|
|
* PCB: PCB 507T (rev1.61)
|
|
* parts: DNOS404ZH103A(ZL10353, DTT7579(?))
|
|
* OEA=0a OEB=00 OEC=00 OED=ff OEE=00
|
|
* IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
|
|
*
|
|
* E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
|
|
* PCB: 507CD (rev1.1)
|
|
* parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
|
|
* OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
|
|
* IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
|
|
* IOD[0] ZL10353 1=enabled
|
|
* IOA[7] TS 0=enabled
|
|
* tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
|
|
*
|
|
* E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
|
|
* PCB: 507DC (rev0.2)
|
|
* parts: TDA10023, DTOS403IH102B TM, CST56I01
|
|
* OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
|
|
* IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
|
|
* IOD[0] TDA10023 1=enabled
|
|
*
|
|
* E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
|
|
* PCB: 507SI (rev2.1)
|
|
* parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
|
|
* OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
|
|
* IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
|
|
* IOD[0] CX24116 1=enabled
|
|
*
|
|
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
|
|
* PCB: 507FA (rev0.4)
|
|
* parts: TDA10023, DTOS403IH102B TM, TDA8024
|
|
* OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
|
|
* IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
|
|
* IOD[5] TDA10023 1=enabled
|
|
* IOE[0] tuner 1=enabled
|
|
*
|
|
* E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
|
|
* PCB: 507FA (rev1.1)
|
|
* parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
|
|
* OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
|
|
* IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
|
|
* DVB-C:
|
|
* IOD[5] TDA10023 1=enabled
|
|
* IOE[0] tuner 1=enabled
|
|
* DVB-T:
|
|
* IOD[0] ZL10353 1=enabled
|
|
* IOE[0] tuner 0=enabled
|
|
* tuner is behind ZL10353 I2C-gate
|
|
*
|
|
* E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
|
|
* PCB: 508TC (rev0.6)
|
|
* parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
|
|
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
|
|
* IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
|
|
* IOA[7] TS 1=enabled
|
|
* IOE[4] TDA18212 1=enabled
|
|
* DVB-C:
|
|
* IOD[6] ZL10353 0=disabled
|
|
* IOD[5] TDA10023 1=enabled
|
|
* IOE[0] IF 1=enabled
|
|
* DVB-T:
|
|
* IOD[5] TDA10023 0=disabled
|
|
* IOD[6] ZL10353 1=enabled
|
|
* IOE[0] IF 0=enabled
|
|
*
|
|
* E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
|
|
* PCB: 508S2 (rev0.7)
|
|
* parts: DNBU10512IST(STV0903, STV6110), ISL6423
|
|
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
|
|
* IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
|
|
* IOA[7] TS 1=enabled
|
|
* IOE[5] STV0903 1=enabled
|
|
*
|
|
* E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
|
|
* PCB: 508T2C (rev0.3)
|
|
* parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
|
|
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
|
|
* IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
|
|
* IOA[7] TS 1=enabled
|
|
* IOE[5] CXD2820R 1=enabled
|
|
*
|
|
* E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
|
|
* PCB: 508PTC (rev0.5)
|
|
* parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
|
|
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
|
|
* IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
|
|
* IOA[7] TS 1=enabled
|
|
* IOE[4] TDA18212 1=enabled
|
|
* DVB-C:
|
|
* IOD[6] ZL10353 0=disabled
|
|
* IOD[5] TDA10023 1=enabled
|
|
* IOE[0] IF 1=enabled
|
|
* DVB-T:
|
|
* IOD[5] TDA10023 0=disabled
|
|
* IOD[6] ZL10353 1=enabled
|
|
* IOE[0] IF 0=enabled
|
|
*
|
|
* E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
|
|
* PCB: 508PS2 (rev0.4)
|
|
* parts: DNBU10512IST(STV0903, STV6110), ISL6423
|
|
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
|
|
* IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
|
|
* IOA[7] TS 1=enabled
|
|
* IOE[5] STV0903 1=enabled
|
|
*/
|
|
|
|
|
|
/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
|
|
static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
|
|
/* enable / disable tuner access on IOE[4] */
|
|
return anysee_wr_reg_mask(adap->dev, REG_IOE, (enable << 4), 0x10);
|
|
}
|
|
|
|
static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct anysee_state *state = adap->dev->priv;
|
|
int ret;
|
|
|
|
deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
|
|
|
|
/* no frontend sleep control */
|
|
if (onoff == 0)
|
|
return 0;
|
|
|
|
switch (state->hw) {
|
|
case ANYSEE_HW_507FA: /* 15 */
|
|
/* E30 Combo Plus */
|
|
/* E30 C Plus */
|
|
|
|
if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
|
|
/* disable DVB-T demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-C tuner on IOE[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
} else {
|
|
/* disable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-T demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-T tuner on IOE[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
break;
|
|
case ANYSEE_HW_508TC: /* 18 */
|
|
case ANYSEE_HW_508PTC: /* 21 */
|
|
/* E7 TC */
|
|
/* E7 PTC */
|
|
|
|
if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
|
|
/* disable DVB-T demod on IOD[6] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
|
|
0x40);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable IF route on IOE[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
} else {
|
|
/* disable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-T demod on IOD[6] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
|
|
0x40);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable IF route on IOE[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
break;
|
|
default:
|
|
ret = 0;
|
|
}
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
int ret;
|
|
struct anysee_state *state = adap->dev->priv;
|
|
u8 hw_info[3];
|
|
u8 tmp;
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = anysee_tda18212_config.i2c_address,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = "\x00",
|
|
}, {
|
|
.addr = anysee_tda18212_config.i2c_address,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &tmp,
|
|
}
|
|
};
|
|
|
|
/* detect hardware only once */
|
|
if (adap->fe_adap[0].fe == NULL) {
|
|
/* Check which hardware we have.
|
|
* We must do this call two times to get reliable values
|
|
* (hw/fw bug).
|
|
*/
|
|
ret = anysee_get_hw_info(adap->dev, hw_info);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = anysee_get_hw_info(adap->dev, hw_info);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* Meaning of these info bytes are guessed. */
|
|
info("firmware version:%d.%d hardware id:%d",
|
|
hw_info[1], hw_info[2], hw_info[0]);
|
|
|
|
state->hw = hw_info[0];
|
|
}
|
|
|
|
/* set current frondend ID for devices having two frondends */
|
|
if (adap->fe_adap[0].fe)
|
|
state->fe_id++;
|
|
|
|
switch (state->hw) {
|
|
case ANYSEE_HW_507T: /* 2 */
|
|
/* E30 */
|
|
|
|
if (state->fe_id)
|
|
break;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(mt352_attach,
|
|
&anysee_mt352_config, &adap->dev->i2c_adap);
|
|
if (adap->fe_adap[0].fe)
|
|
break;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
|
|
&anysee_zl10353_config, &adap->dev->i2c_adap);
|
|
|
|
break;
|
|
case ANYSEE_HW_507CD: /* 6 */
|
|
/* E30 Plus */
|
|
|
|
if (state->fe_id)
|
|
break;
|
|
|
|
/* enable DVB-T demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable transport stream on IOA[7] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
|
|
&anysee_zl10353_config, &adap->dev->i2c_adap);
|
|
|
|
break;
|
|
case ANYSEE_HW_507DC: /* 10 */
|
|
/* E30 C Plus */
|
|
|
|
if (state->fe_id)
|
|
break;
|
|
|
|
/* enable DVB-C demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
|
|
&anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
|
|
|
|
break;
|
|
case ANYSEE_HW_507SI: /* 11 */
|
|
/* E30 S2 Plus */
|
|
|
|
if (state->fe_id)
|
|
break;
|
|
|
|
/* enable DVB-S/S2 demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(cx24116_attach,
|
|
&anysee_cx24116_config, &adap->dev->i2c_adap);
|
|
|
|
break;
|
|
case ANYSEE_HW_507FA: /* 15 */
|
|
/* E30 Combo Plus */
|
|
/* E30 C Plus */
|
|
|
|
/* enable tuner on IOE[4] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* probe TDA18212 */
|
|
tmp = 0;
|
|
ret = i2c_transfer(&adap->dev->i2c_adap, msg, 2);
|
|
if (ret == 2 && tmp == 0xc7)
|
|
deb_info("%s: TDA18212 found\n", __func__);
|
|
else
|
|
tmp = 0;
|
|
|
|
/* disable tuner on IOE[4] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
|
|
/* disable DVB-T demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
if (tmp == 0xc7) {
|
|
/* TDA18212 config */
|
|
adap->fe_adap[state->fe_id].fe = dvb_attach(
|
|
tda10023_attach,
|
|
&anysee_tda10023_tda18212_config,
|
|
&adap->dev->i2c_adap, 0x48);
|
|
} else {
|
|
/* PLL config */
|
|
adap->fe_adap[state->fe_id].fe = dvb_attach(
|
|
tda10023_attach,
|
|
&anysee_tda10023_config,
|
|
&adap->dev->i2c_adap, 0x48);
|
|
}
|
|
} else {
|
|
/* disable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-T demod on IOD[0] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
|
|
0x01);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
if (tmp == 0xc7) {
|
|
/* TDA18212 config */
|
|
adap->fe_adap[state->fe_id].fe = dvb_attach(
|
|
zl10353_attach,
|
|
&anysee_zl10353_tda18212_config2,
|
|
&adap->dev->i2c_adap);
|
|
} else {
|
|
/* PLL config */
|
|
adap->fe_adap[state->fe_id].fe = dvb_attach(
|
|
zl10353_attach,
|
|
&anysee_zl10353_config,
|
|
&adap->dev->i2c_adap);
|
|
}
|
|
}
|
|
|
|
/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
|
|
if (tmp == 0xc7) {
|
|
if (adap->fe_adap[state->fe_id].fe)
|
|
adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
|
|
anysee_i2c_gate_ctrl;
|
|
}
|
|
|
|
break;
|
|
case ANYSEE_HW_508TC: /* 18 */
|
|
case ANYSEE_HW_508PTC: /* 21 */
|
|
/* E7 TC */
|
|
/* E7 PTC */
|
|
|
|
if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
|
|
/* disable DVB-T demod on IOD[6] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
|
|
0x40);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[state->fe_id].fe =
|
|
dvb_attach(tda10023_attach,
|
|
&anysee_tda10023_tda18212_config,
|
|
&adap->dev->i2c_adap, 0x48);
|
|
} else {
|
|
/* disable DVB-C demod on IOD[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
|
|
0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* enable DVB-T demod on IOD[6] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
|
|
0x40);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[state->fe_id].fe =
|
|
dvb_attach(zl10353_attach,
|
|
&anysee_zl10353_tda18212_config,
|
|
&adap->dev->i2c_adap);
|
|
}
|
|
|
|
/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
|
|
if (adap->fe_adap[state->fe_id].fe)
|
|
adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
|
|
anysee_i2c_gate_ctrl;
|
|
|
|
state->has_ci = true;
|
|
|
|
break;
|
|
case ANYSEE_HW_508S2: /* 19 */
|
|
case ANYSEE_HW_508PS2: /* 22 */
|
|
/* E7 S2 */
|
|
/* E7 PS2 */
|
|
|
|
if (state->fe_id)
|
|
break;
|
|
|
|
/* enable DVB-S/S2 demod on IOE[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* attach demod */
|
|
adap->fe_adap[0].fe = dvb_attach(stv0900_attach,
|
|
&anysee_stv0900_config, &adap->dev->i2c_adap, 0);
|
|
|
|
state->has_ci = true;
|
|
|
|
break;
|
|
case ANYSEE_HW_508T2C: /* 20 */
|
|
/* E7 T2C */
|
|
|
|
/* enable DVB-T/T2/C demod on IOE[5] */
|
|
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (state->fe_id == 0) {
|
|
/* DVB-T/T2 */
|
|
adap->fe_adap[state->fe_id].fe =
|
|
dvb_attach(cxd2820r_attach,
|
|
&anysee_cxd2820r_config,
|
|
&adap->dev->i2c_adap, NULL);
|
|
} else {
|
|
/* DVB-C */
|
|
adap->fe_adap[state->fe_id].fe =
|
|
dvb_attach(cxd2820r_attach,
|
|
&anysee_cxd2820r_config,
|
|
&adap->dev->i2c_adap, adap->fe_adap[0].fe);
|
|
}
|
|
|
|
state->has_ci = true;
|
|
|
|
break;
|
|
}
|
|
|
|
if (!adap->fe_adap[0].fe) {
|
|
/* we have no frontend :-( */
|
|
ret = -ENODEV;
|
|
err("Unsupported Anysee version. " \
|
|
"Please report the <linux-media@vger.kernel.org>.");
|
|
}
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct anysee_state *state = adap->dev->priv;
|
|
struct dvb_frontend *fe;
|
|
int ret;
|
|
deb_info("%s: fe=%d\n", __func__, state->fe_id);
|
|
|
|
switch (state->hw) {
|
|
case ANYSEE_HW_507T: /* 2 */
|
|
/* E30 */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
|
|
(0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579);
|
|
|
|
break;
|
|
case ANYSEE_HW_507CD: /* 6 */
|
|
/* E30 Plus */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
|
|
(0xc2 >> 1), &adap->dev->i2c_adap,
|
|
DVB_PLL_THOMSON_DTT7579);
|
|
|
|
break;
|
|
case ANYSEE_HW_507DC: /* 10 */
|
|
/* E30 C Plus */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
|
|
(0xc0 >> 1), &adap->dev->i2c_adap,
|
|
DVB_PLL_SAMSUNG_DTOS403IH102A);
|
|
|
|
break;
|
|
case ANYSEE_HW_507SI: /* 11 */
|
|
/* E30 S2 Plus */
|
|
|
|
/* attach LNB controller */
|
|
fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
|
|
&adap->dev->i2c_adap, &anysee_isl6423_config);
|
|
|
|
break;
|
|
case ANYSEE_HW_507FA: /* 15 */
|
|
/* E30 Combo Plus */
|
|
/* E30 C Plus */
|
|
|
|
/* Try first attach TDA18212 silicon tuner on IOE[4], if that
|
|
* fails attach old simple PLL. */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
|
|
&adap->dev->i2c_adap, &anysee_tda18212_config);
|
|
if (fe)
|
|
break;
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe,
|
|
(0xc0 >> 1), &adap->dev->i2c_adap,
|
|
DVB_PLL_SAMSUNG_DTOS403IH102A);
|
|
|
|
break;
|
|
case ANYSEE_HW_508TC: /* 18 */
|
|
case ANYSEE_HW_508PTC: /* 21 */
|
|
/* E7 TC */
|
|
/* E7 PTC */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
|
|
&adap->dev->i2c_adap, &anysee_tda18212_config);
|
|
|
|
break;
|
|
case ANYSEE_HW_508S2: /* 19 */
|
|
case ANYSEE_HW_508PS2: /* 22 */
|
|
/* E7 S2 */
|
|
/* E7 PS2 */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe,
|
|
&anysee_stv6110_config, &adap->dev->i2c_adap);
|
|
|
|
if (fe) {
|
|
/* attach LNB controller */
|
|
fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
|
|
&adap->dev->i2c_adap, &anysee_isl6423_config);
|
|
}
|
|
|
|
break;
|
|
|
|
case ANYSEE_HW_508T2C: /* 20 */
|
|
/* E7 T2C */
|
|
|
|
/* attach tuner */
|
|
fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
|
|
&adap->dev->i2c_adap, &anysee_tda18212_config2);
|
|
|
|
break;
|
|
default:
|
|
fe = NULL;
|
|
}
|
|
|
|
if (fe)
|
|
ret = 0;
|
|
else
|
|
ret = -ENODEV;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_rc_query(struct dvb_usb_device *d)
|
|
{
|
|
u8 buf[] = {CMD_GET_IR_CODE};
|
|
u8 ircode[2];
|
|
int ret;
|
|
|
|
/* Remote controller is basic NEC using address byte 0x08.
|
|
Anysee device RC query returns only two bytes, status and code,
|
|
address byte is dropped. Also it does not return any value for
|
|
NEC RCs having address byte other than 0x08. Due to that, we
|
|
cannot use that device as standard NEC receiver.
|
|
It could be possible make hack which reads whole code directly
|
|
from device memory... */
|
|
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ircode[0]) {
|
|
deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
|
|
rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
|
|
int addr)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
|
|
u8 val;
|
|
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
|
|
int addr, u8 val)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
|
|
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
|
|
u8 addr)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
|
|
u8 val;
|
|
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
|
|
u8 addr, u8 val)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
|
|
|
|
ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
struct anysee_state *state = d->priv;
|
|
|
|
state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(300);
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(30);
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
int ret;
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
|
|
int open)
|
|
{
|
|
struct dvb_usb_device *d = ci->data;
|
|
struct anysee_state *state = d->priv;
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (tmp == 0) {
|
|
ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
|
|
if (time_after(jiffies, state->ci_cam_ready))
|
|
ret |= DVB_CA_EN50221_POLL_CAM_READY;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int anysee_ci_init(struct dvb_usb_device *d)
|
|
{
|
|
struct anysee_state *state = d->priv;
|
|
int ret;
|
|
|
|
state->ci.owner = THIS_MODULE;
|
|
state->ci.read_attribute_mem = anysee_ci_read_attribute_mem;
|
|
state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
|
|
state->ci.read_cam_control = anysee_ci_read_cam_control;
|
|
state->ci.write_cam_control = anysee_ci_write_cam_control;
|
|
state->ci.slot_reset = anysee_ci_slot_reset;
|
|
state->ci.slot_shutdown = anysee_ci_slot_shutdown;
|
|
state->ci.slot_ts_enable = anysee_ci_slot_ts_enable;
|
|
state->ci.poll_slot_status = anysee_ci_poll_slot_status;
|
|
state->ci.data = d;
|
|
|
|
ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void anysee_ci_release(struct dvb_usb_device *d)
|
|
{
|
|
struct anysee_state *state = d->priv;
|
|
|
|
/* detach CI */
|
|
if (state->has_ci)
|
|
dvb_ca_en50221_release(&state->ci);
|
|
|
|
return;
|
|
}
|
|
|
|
static int anysee_init(struct dvb_usb_device *d)
|
|
{
|
|
struct anysee_state *state = d->priv;
|
|
int ret;
|
|
|
|
/* LED light */
|
|
ret = anysee_led_ctrl(d, 0x01, 0x03);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* enable IR */
|
|
ret = anysee_ir_ctrl(d, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* attach CI */
|
|
if (state->has_ci) {
|
|
ret = anysee_ci_init(d);
|
|
if (ret) {
|
|
state->has_ci = false;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* DVB USB Driver stuff */
|
|
static struct dvb_usb_device_properties anysee_properties;
|
|
|
|
static int anysee_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct dvb_usb_device *d;
|
|
struct usb_host_interface *alt;
|
|
int ret;
|
|
|
|
/* There is one interface with two alternate settings.
|
|
Alternate setting 0 is for bulk transfer.
|
|
Alternate setting 1 is for isochronous transfer.
|
|
We use bulk transfer (alternate setting 0). */
|
|
if (intf->num_altsetting < 1)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Anysee is always warm (its USB-bridge, Cypress FX2, uploads
|
|
* firmware from eeprom). If dvb_usb_device_init() succeeds that
|
|
* means d is a valid pointer.
|
|
*/
|
|
ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
|
|
adapter_nr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
alt = usb_altnum_to_altsetting(intf, 0);
|
|
if (alt == NULL) {
|
|
deb_info("%s: no alt found!\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
|
|
alt->desc.bAlternateSetting);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return anysee_init(d);
|
|
}
|
|
|
|
static void anysee_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct dvb_usb_device *d = usb_get_intfdata(intf);
|
|
|
|
anysee_ci_release(d);
|
|
dvb_usb_device_exit(intf);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct usb_device_id anysee_table[] = {
|
|
{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
|
|
{ USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, anysee_table);
|
|
|
|
static struct dvb_usb_device_properties anysee_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
|
|
.size_of_priv = sizeof(struct anysee_state),
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.num_frontends = 2,
|
|
.frontend_ctrl = anysee_frontend_ctrl,
|
|
.fe = { {
|
|
.streaming_ctrl = anysee_streaming_ctrl,
|
|
.frontend_attach = anysee_frontend_attach,
|
|
.tuner_attach = anysee_tuner_attach,
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 8,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = (16*512),
|
|
}
|
|
}
|
|
},
|
|
}, {
|
|
.streaming_ctrl = anysee_streaming_ctrl,
|
|
.frontend_attach = anysee_frontend_attach,
|
|
.tuner_attach = anysee_tuner_attach,
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 8,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = (16*512),
|
|
}
|
|
}
|
|
},
|
|
} },
|
|
}
|
|
},
|
|
|
|
.rc.core = {
|
|
.rc_codes = RC_MAP_ANYSEE,
|
|
.protocol = RC_TYPE_OTHER,
|
|
.module_name = "anysee",
|
|
.rc_query = anysee_rc_query,
|
|
.rc_interval = 250, /* windows driver uses 500ms */
|
|
},
|
|
|
|
.i2c_algo = &anysee_i2c_algo,
|
|
|
|
.generic_bulk_ctrl_endpoint = 1,
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{
|
|
.name = "Anysee DVB USB2.0",
|
|
.cold_ids = {NULL},
|
|
.warm_ids = {&anysee_table[0],
|
|
&anysee_table[1], NULL},
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct usb_driver anysee_driver = {
|
|
.name = "dvb_usb_anysee",
|
|
.probe = anysee_probe,
|
|
.disconnect = anysee_disconnect,
|
|
.id_table = anysee_table,
|
|
};
|
|
|
|
/* module stuff */
|
|
static int __init anysee_module_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb_register(&anysee_driver);
|
|
if (ret)
|
|
err("%s: usb_register failed. Error number %d", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit anysee_module_exit(void)
|
|
{
|
|
/* deregister this driver from the USB subsystem */
|
|
usb_deregister(&anysee_driver);
|
|
}
|
|
|
|
module_init(anysee_module_init);
|
|
module_exit(anysee_module_exit);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
|
|
MODULE_LICENSE("GPL");
|