349 lines
8.3 KiB
C
349 lines
8.3 KiB
C
/*
|
|
|
|
bt8xx GPIO abuser
|
|
|
|
Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
|
|
|
|
Please do _only_ contact the people listed _above_ with issues related to this driver.
|
|
All the other people listed below are not related to this driver. Their names
|
|
are only here, because this driver is derived from the bt848 driver.
|
|
|
|
|
|
Derived from the bt848 driver:
|
|
|
|
Copyright (C) 1996,97,98 Ralph Metzler
|
|
& Marcus Metzler
|
|
(c) 1999-2002 Gerd Knorr
|
|
|
|
some v4l2 code lines are taken from Justin's bttv2 driver which is
|
|
(c) 2000 Justin Schoeman
|
|
|
|
V4L1 removal from:
|
|
(c) 2005-2006 Nickolay V. Shmyrev
|
|
|
|
Fixes to be fully V4L2 compliant by
|
|
(c) 2006 Mauro Carvalho Chehab
|
|
|
|
Cropping and overscan support
|
|
Copyright (C) 2005, 2006 Michael H. Schimek
|
|
Sponsored by OPQ Systems AB
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
/* Steal the hardware definitions from the bttv driver. */
|
|
#include "../media/video/bt8xx/bt848.h"
|
|
|
|
|
|
#define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */
|
|
|
|
|
|
struct bt8xxgpio {
|
|
spinlock_t lock;
|
|
|
|
void __iomem *mmio;
|
|
struct pci_dev *pdev;
|
|
struct gpio_chip gpio;
|
|
|
|
#ifdef CONFIG_PM
|
|
u32 saved_outen;
|
|
u32 saved_data;
|
|
#endif
|
|
};
|
|
|
|
#define bgwrite(dat, adr) writel((dat), bg->mmio+(adr))
|
|
#define bgread(adr) readl(bg->mmio+(adr))
|
|
|
|
|
|
static int modparam_gpiobase = -1/* dynamic */;
|
|
module_param_named(gpiobase, modparam_gpiobase, int, 0444);
|
|
MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
|
|
|
|
|
|
static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
|
|
{
|
|
struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
|
|
unsigned long flags;
|
|
u32 outen, data;
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
|
|
data = bgread(BT848_GPIO_DATA);
|
|
data &= ~(1 << nr);
|
|
bgwrite(data, BT848_GPIO_DATA);
|
|
|
|
outen = bgread(BT848_GPIO_OUT_EN);
|
|
outen &= ~(1 << nr);
|
|
bgwrite(outen, BT848_GPIO_OUT_EN);
|
|
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
|
|
{
|
|
struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
val = bgread(BT848_GPIO_DATA);
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
|
|
return !!(val & (1 << nr));
|
|
}
|
|
|
|
static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
|
|
unsigned nr, int val)
|
|
{
|
|
struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
|
|
unsigned long flags;
|
|
u32 outen, data;
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
|
|
outen = bgread(BT848_GPIO_OUT_EN);
|
|
outen |= (1 << nr);
|
|
bgwrite(outen, BT848_GPIO_OUT_EN);
|
|
|
|
data = bgread(BT848_GPIO_DATA);
|
|
if (val)
|
|
data |= (1 << nr);
|
|
else
|
|
data &= ~(1 << nr);
|
|
bgwrite(data, BT848_GPIO_DATA);
|
|
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
|
|
unsigned nr, int val)
|
|
{
|
|
struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
|
|
unsigned long flags;
|
|
u32 data;
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
|
|
data = bgread(BT848_GPIO_DATA);
|
|
if (val)
|
|
data |= (1 << nr);
|
|
else
|
|
data &= ~(1 << nr);
|
|
bgwrite(data, BT848_GPIO_DATA);
|
|
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
}
|
|
|
|
static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
|
|
{
|
|
struct gpio_chip *c = &bg->gpio;
|
|
|
|
c->label = bg->pdev->dev.bus_id;
|
|
c->owner = THIS_MODULE;
|
|
c->direction_input = bt8xxgpio_gpio_direction_input;
|
|
c->get = bt8xxgpio_gpio_get;
|
|
c->direction_output = bt8xxgpio_gpio_direction_output;
|
|
c->set = bt8xxgpio_gpio_set;
|
|
c->dbg_show = NULL;
|
|
c->base = modparam_gpiobase;
|
|
c->ngpio = BT8XXGPIO_NR_GPIOS;
|
|
c->can_sleep = 0;
|
|
}
|
|
|
|
static int bt8xxgpio_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct bt8xxgpio *bg;
|
|
int err;
|
|
|
|
bg = kzalloc(sizeof(*bg), GFP_KERNEL);
|
|
if (!bg)
|
|
return -ENOMEM;
|
|
|
|
bg->pdev = dev;
|
|
spin_lock_init(&bg->lock);
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
|
|
goto err_freebg;
|
|
}
|
|
if (!request_mem_region(pci_resource_start(dev, 0),
|
|
pci_resource_len(dev, 0),
|
|
"bt8xxgpio")) {
|
|
printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
|
|
(unsigned long long)pci_resource_start(dev, 0));
|
|
err = -EBUSY;
|
|
goto err_disable;
|
|
}
|
|
pci_set_master(dev);
|
|
pci_set_drvdata(dev, bg);
|
|
|
|
bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
|
|
if (!bg->mmio) {
|
|
printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
|
|
err = -EIO;
|
|
goto err_release_mem;
|
|
}
|
|
|
|
/* Disable interrupts */
|
|
bgwrite(0, BT848_INT_MASK);
|
|
|
|
/* gpio init */
|
|
bgwrite(0, BT848_GPIO_DMA_CTL);
|
|
bgwrite(0, BT848_GPIO_REG_INP);
|
|
bgwrite(0, BT848_GPIO_OUT_EN);
|
|
|
|
bt8xxgpio_gpio_setup(bg);
|
|
err = gpiochip_add(&bg->gpio);
|
|
if (err) {
|
|
printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
|
|
goto err_release_mem;
|
|
}
|
|
|
|
printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
|
|
bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
|
|
|
|
return 0;
|
|
|
|
err_release_mem:
|
|
release_mem_region(pci_resource_start(dev, 0),
|
|
pci_resource_len(dev, 0));
|
|
pci_set_drvdata(dev, NULL);
|
|
err_disable:
|
|
pci_disable_device(dev);
|
|
err_freebg:
|
|
kfree(bg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void bt8xxgpio_remove(struct pci_dev *pdev)
|
|
{
|
|
struct bt8xxgpio *bg = pci_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&bg->gpio);
|
|
|
|
bgwrite(0, BT848_INT_MASK);
|
|
bgwrite(~0x0, BT848_INT_STAT);
|
|
bgwrite(0x0, BT848_GPIO_OUT_EN);
|
|
|
|
iounmap(bg->mmio);
|
|
release_mem_region(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
pci_disable_device(pdev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(bg);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct bt8xxgpio *bg = pci_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
|
|
bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
|
|
bg->saved_data = bgread(BT848_GPIO_DATA);
|
|
|
|
bgwrite(0, BT848_INT_MASK);
|
|
bgwrite(~0x0, BT848_INT_STAT);
|
|
bgwrite(0x0, BT848_GPIO_OUT_EN);
|
|
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bt8xxgpio_resume(struct pci_dev *pdev)
|
|
{
|
|
struct bt8xxgpio *bg = pci_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
pci_set_power_state(pdev, 0);
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
pci_restore_state(pdev);
|
|
|
|
spin_lock_irqsave(&bg->lock, flags);
|
|
|
|
bgwrite(0, BT848_INT_MASK);
|
|
bgwrite(0, BT848_GPIO_DMA_CTL);
|
|
bgwrite(0, BT848_GPIO_REG_INP);
|
|
bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
|
|
bgwrite(bg->saved_data & bg->saved_outen,
|
|
BT848_GPIO_DATA);
|
|
|
|
spin_unlock_irqrestore(&bg->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define bt8xxgpio_suspend NULL
|
|
#define bt8xxgpio_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_device_id bt8xxgpio_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
|
|
|
|
static struct pci_driver bt8xxgpio_pci_driver = {
|
|
.name = "bt8xxgpio",
|
|
.id_table = bt8xxgpio_pci_tbl,
|
|
.probe = bt8xxgpio_probe,
|
|
.remove = bt8xxgpio_remove,
|
|
.suspend = bt8xxgpio_suspend,
|
|
.resume = bt8xxgpio_resume,
|
|
};
|
|
|
|
static int bt8xxgpio_init(void)
|
|
{
|
|
return pci_register_driver(&bt8xxgpio_pci_driver);
|
|
}
|
|
module_init(bt8xxgpio_init)
|
|
|
|
static void bt8xxgpio_exit(void)
|
|
{
|
|
pci_unregister_driver(&bt8xxgpio_pci_driver);
|
|
}
|
|
module_exit(bt8xxgpio_exit)
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Michael Buesch");
|
|
MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
|