linux/arch/mips/jmr3927/rbhma3100/kgdb_io.c

156 lines
4.1 KiB
C

/*
* BRIEF MODULE DESCRIPTION
* Low level uart routines to directly access a TX[34]927 SIO.
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ahennessy@mvista.com or source@mvista.com
*
* Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
*
* Copyright (C) 2000-2001 Toshiba Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <asm/jmr3927/txx927.h>
#include <asm/jmr3927/tx3927.h>
#include <asm/jmr3927/jmr3927.h>
#define TIMEOUT 0xffffff
#define SLOW_DOWN
static const char digits[16] = "0123456789abcdef";
#ifdef SLOW_DOWN
#define slow_down() { int k; for (k=0; k<10000; k++); }
#else
#define slow_down()
#endif
static int remoteDebugInitialized = 0;
int putDebugChar(unsigned char c)
{
int i = 0;
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(38400);
}
do {
slow_down();
i++;
if (i>TIMEOUT) {
break;
}
} while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
tx3927_sioptr(0)->tfifo = c;
return 1;
}
unsigned char getDebugChar(void)
{
int i = 0;
int dicr;
char c;
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(38400);
}
/* diable RX int. */
dicr = tx3927_sioptr(0)->dicr;
tx3927_sioptr(0)->dicr = 0;
do {
slow_down();
i++;
if (i>TIMEOUT) {
break;
}
} while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
;
c = tx3927_sioptr(0)->rfifo;
/* clear RX int. status */
tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
/* enable RX int. */
tx3927_sioptr(0)->dicr = dicr;
return c;
}
void debugInit(int baud)
{
/*
volatile unsigned long lcr;
volatile unsigned long dicr;
volatile unsigned long disr;
volatile unsigned long cisr;
volatile unsigned long fcr;
volatile unsigned long flcr;
volatile unsigned long bgr;
volatile unsigned long tfifo;
volatile unsigned long rfifo;
*/
tx3927_sioptr(0)->lcr = 0x020;
tx3927_sioptr(0)->dicr = 0;
tx3927_sioptr(0)->disr = 0x4100;
tx3927_sioptr(0)->cisr = 0x014;
tx3927_sioptr(0)->fcr = 0;
tx3927_sioptr(0)->flcr = 0x02;
tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
TXx927_SIBGR_BCLK_T0;
#if 0
/*
* Reset the UART.
*/
tx3927_sioptr(0)->fcr = TXx927_SIFCR_SWRST;
while (tx3927_sioptr(0)->fcr & TXx927_SIFCR_SWRST)
;
/*
* and set the speed of the serial port
* (currently hardwired to 9600 8N1
*/
tx3927_sioptr(0)->lcr = TXx927_SILCR_UMODE_8BIT |
TXx927_SILCR_USBL_1BIT |
TXx927_SILCR_SCS_IMCLK_BG;
tx3927_sioptr(0)->bgr =
((JMR3927_BASE_BAUD + baud / 2) / baud) |
TXx927_SIBGR_BCLK_T0;
/* HW RTS/CTS control */
if (ser->flags & ASYNC_HAVE_CTS_LINE)
tx3927_sioptr(0)->flcr = TXx927_SIFLCR_RCS | TXx927_SIFLCR_TES |
TXx927_SIFLCR_RTSTL_MAX /* 15 */;
/* Enable RX/TX */
tx3927_sioptr(0)->flcr &= ~(TXx927_SIFLCR_RSDE | TXx927_SIFLCR_TSDE);
#endif
}