linux/drivers/net/phy
Florian Fainelli 52fa627e20 net: phy: broadcom: Fix RGMII delays configuration for BCM54210E
commit fea7fda7f5 upstream.

Commit 0fc9ae1076 ("net: phy: broadcom: add support for
BCM54210E") added support for BCM54210E but also unconditionally cleared
the RXC to RXD skew and the TXD to TXC skew, thus only making
PHY_INTERFACE_MODE_RGMII a possible configuration. Use
bcm54xx_config_clock_delay() which correctly sets the registers
depending on the 4 possible PHY interface values that exist for RGMII.

Fixes: 0fc9ae1076 ("net: phy: broadcom: add support for BCM54210E")
Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com>
Reported-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26 10:01:01 +01:00
..
Kconfig drivers: net: Fix Kconfig indentation 2019-09-26 08:56:17 +02:00
Makefile net: phy: adin: add support for Analog Devices PHYs 2019-08-16 11:56:25 -07:00
adin.c net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable 2019-09-16 22:02:45 +02:00
amd.c
aquantia.h
aquantia_hwmon.c
aquantia_main.c net: phy: aquantia: add suspend / resume ops for AQR105 2020-01-04 19:18:45 +01:00
at803x.c net: phy: at803x: use operating parameters from PHY-specific status 2019-10-04 18:11:08 -07:00
ax88796b.c net: phy: rename Asix Electronics PHY driver 2019-06-09 13:24:17 -07:00
bcm-cygnus.c
bcm-phy-lib.c
bcm-phy-lib.h
bcm7xxx.c net: phy: bcm7xxx: define soft_reset for 40nm EPHY 2019-10-18 10:00:07 -07:00
bcm63xx.c
bcm87xx.c net: phy: bcm87xx: improve bcm87xx_config_init and feature detection 2019-05-26 21:56:41 -07:00
broadcom.c net: phy: broadcom: Fix RGMII delays configuration for BCM54210E 2020-01-26 10:01:01 +01:00
cicada.c
cortina.c
davicom.c
dp83tc811.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83640.c dp83640: Reject requests to enable time stamping on both edges. 2019-11-15 12:48:32 -08:00
dp83640_reg.h
dp83822.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83848.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83867.c net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset 2020-01-23 08:22:50 +01:00
et1011c.c
fixed_phy.c net: phy: fixed_phy: print gpio error only if gpio node is present 2019-07-30 09:54:45 -07:00
icplus.c
intel-xway.c
lxt.c net: phy: lxt: Add suspend/resume support to LXT971 and LXT973. 2019-05-23 09:19:21 -07:00
marvell.c
marvell10g.c net: phy: marvell10g: report if the PHY fails to boot firmware 2019-05-29 14:25:10 -07:00
mdio-aspeed.c net: phy: Add mdio-aspeed 2019-08-02 17:56:28 -07:00
mdio-bcm-iproc.c phy: mdio-bcm-iproc: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-bcm-unimac.c
mdio-bitbang.c
mdio-boardinfo.c
mdio-boardinfo.h
mdio-cavium.c
mdio-cavium.h net: mdio-octeon: Fix Kconfig warnings and build errors 2019-08-06 14:11:08 -07:00
mdio-gpio.c
mdio-hisi-femac.c phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-i2c.c
mdio-i2c.h
mdio-moxart.c phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-mscc-miim.c
mdio-mux-bcm-iproc.c
mdio-mux-gpio.c
mdio-mux-meson-g12a.c phy: mdio-mux-meson-g12a: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-mux-mmioreg.c
mdio-mux-multiplexer.c
mdio-mux.c
mdio-octeon.c
mdio-sun4i.c phy: mdio-sun4i: add missed regulator_disable in remove 2019-11-18 17:22:40 -08:00
mdio-thunder.c
mdio-xgene.c net: phy: xgene: use devm_platform_ioremap_resource() to simplify code 2019-08-01 13:10:34 -04:00
mdio-xgene.h
mdio_bus.c mdio_bus: don't use managed reset-controller 2019-12-04 22:30:52 +01:00
mdio_device.c net: phy: allow for reset line to be tied to a sleepy GPIO controller 2019-10-04 18:07:45 -07:00
meson-gxl.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
micrel.c net: phy: micrel: Update KSZ87xx PHY name 2019-10-17 16:31:52 -07:00
microchip.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
microchip_t1.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
mscc.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
national.c net/phy: fix DP83865 10 Mbps HDX loopback disable function 2019-09-21 18:21:52 -07:00
nxp-tja11xx.c net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO() 2019-05-29 22:02:18 -07:00
phy-c45.c net: phy: Fix "link partner" information disappear issue 2019-10-16 13:17:01 -07:00
phy-core.c net: phy: extract pause mode 2019-10-04 18:11:08 -07:00
phy.c net: phy: Fix "link partner" information disappear issue 2019-10-16 13:17:01 -07:00
phy_device.c net: phy: initialise phydev speed and duplex sanely 2019-12-31 16:45:47 +01:00
phy_led_triggers.c net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() 2019-07-31 18:56:11 -04:00
phylink.c net: phylink: fix interface passed to mac_link_up 2020-01-04 19:19:17 +01:00
qsemi.c
realtek.c net: phy: realtek: support NBase-T MMD EEE registers on RTL8125 2019-08-19 13:04:45 -07:00
rockchip.c
sfp-bus.c net: sfp: remove sfp-bus use of netdevs 2019-05-31 12:37:46 -07:00
sfp.c net: phy: sfp: Add labels to hwmon sensors 2019-08-24 17:01:36 -07:00
sfp.h
smsc.c net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag 2019-10-23 21:44:44 -07:00
spi_ks8995.c
ste10Xp.c
swphy.c net: phy: swphy: emulate register MII_ESTATUS 2019-08-15 11:43:48 -07:00
swphy.h
teranetics.c
uPD60620.c
vitesse.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
xilinx_gmii2rgmii.c net: phy: gmii2rgmii: Dont use priv field in phy device 2019-09-05 12:32:06 +02:00