linux/arch/arm/mm/pmsa-v8.c

308 lines
6.7 KiB
C

/*
* Based on linux/arch/arm/pmsa-v7.c
*
* ARM PMSAv8 supporting functions.
*/
#include <linux/memblock.h>
#include <linux/range.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/mpu.h>
#include <asm/memory.h>
#include <asm/sections.h>
#include "mm.h"
#ifndef CONFIG_CPU_V7M
#define PRSEL __ACCESS_CP15(c6, 0, c2, 1)
#define PRBAR __ACCESS_CP15(c6, 0, c3, 0)
#define PRLAR __ACCESS_CP15(c6, 0, c3, 1)
static inline u32 prlar_read(void)
{
return read_sysreg(PRLAR);
}
static inline u32 prbar_read(void)
{
return read_sysreg(PRBAR);
}
static inline void prsel_write(u32 v)
{
write_sysreg(v, PRSEL);
}
static inline void prbar_write(u32 v)
{
write_sysreg(v, PRBAR);
}
static inline void prlar_write(u32 v)
{
write_sysreg(v, PRLAR);
}
#else
static inline u32 prlar_read(void)
{
return readl_relaxed(BASEADDR_V7M_SCB + PMSAv8_RLAR);
}
static inline u32 prbar_read(void)
{
return readl_relaxed(BASEADDR_V7M_SCB + PMSAv8_RBAR);
}
static inline void prsel_write(u32 v)
{
writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RNR);
}
static inline void prbar_write(u32 v)
{
writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RBAR);
}
static inline void prlar_write(u32 v)
{
writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RLAR);
}
#endif
static struct range __initdata io[MPU_MAX_REGIONS];
static struct range __initdata mem[MPU_MAX_REGIONS];
static unsigned int __initdata mpu_max_regions;
static __init bool is_region_fixed(int number)
{
switch (number) {
case PMSAv8_XIP_REGION:
case PMSAv8_KERNEL_REGION:
return true;
default:
return false;
}
}
void __init pmsav8_adjust_lowmem_bounds(void)
{
phys_addr_t mem_end;
struct memblock_region *reg;
bool first = true;
for_each_memblock(memory, reg) {
if (first) {
phys_addr_t phys_offset = PHYS_OFFSET;
/*
* Initially only use memory continuous from
* PHYS_OFFSET */
if (reg->base != phys_offset)
panic("First memory bank must be contiguous from PHYS_OFFSET");
mem_end = reg->base + reg->size;
first = false;
} else {
/*
* memblock auto merges contiguous blocks, remove
* all blocks afterwards in one go (we can't remove
* blocks separately while iterating)
*/
pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
&mem_end, &reg->base);
memblock_remove(reg->base, 0 - reg->base);
break;
}
}
}
static int __init __mpu_max_regions(void)
{
static int max_regions;
u32 mpuir;
if (max_regions)
return max_regions;
mpuir = read_cpuid_mputype();
max_regions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
return max_regions;
}
static int __init __pmsav8_setup_region(unsigned int number, u32 bar, u32 lar)
{
if (number > mpu_max_regions
|| number >= MPU_MAX_REGIONS)
return -ENOENT;
dsb();
prsel_write(number);
isb();
prbar_write(bar);
prlar_write(lar);
mpu_rgn_info.rgns[number].prbar = bar;
mpu_rgn_info.rgns[number].prlar = lar;
mpu_rgn_info.used++;
return 0;
}
static int __init pmsav8_setup_ram(unsigned int number, phys_addr_t start,phys_addr_t end)
{
u32 bar, lar;
if (is_region_fixed(number))
return -EINVAL;
bar = start;
lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);;
bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED;
lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN;
return __pmsav8_setup_region(number, bar, lar);
}
static int __init pmsav8_setup_io(unsigned int number, phys_addr_t start,phys_addr_t end)
{
u32 bar, lar;
if (is_region_fixed(number))
return -EINVAL;
bar = start;
lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);;
bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN;
lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN;
return __pmsav8_setup_region(number, bar, lar);
}
static int __init pmsav8_setup_fixed(unsigned int number, phys_addr_t start,phys_addr_t end)
{
u32 bar, lar;
if (!is_region_fixed(number))
return -EINVAL;
bar = start;
lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);
bar |= PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED;
lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN;
prsel_write(number);
isb();
if (prbar_read() != bar || prlar_read() != lar)
return -EINVAL;
/* Reserved region was set up early, we just need a record for secondaries */
mpu_rgn_info.rgns[number].prbar = bar;
mpu_rgn_info.rgns[number].prlar = lar;
mpu_rgn_info.used++;
return 0;
}
#ifndef CONFIG_CPU_V7M
static int __init pmsav8_setup_vector(unsigned int number, phys_addr_t start,phys_addr_t end)
{
u32 bar, lar;
if (number == PMSAv8_KERNEL_REGION)
return -EINVAL;
bar = start;
lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);
bar |= PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED;
lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN;
return __pmsav8_setup_region(number, bar, lar);
}
#endif
void __init pmsav8_setup(void)
{
int i, err = 0;
int region = PMSAv8_KERNEL_REGION;
/* How many regions are supported ? */
mpu_max_regions = __mpu_max_regions();
/* RAM: single chunk of memory */
add_range(mem, ARRAY_SIZE(mem), 0, memblock.memory.regions[0].base,
memblock.memory.regions[0].base + memblock.memory.regions[0].size);
/* IO: cover full 4G range */
add_range(io, ARRAY_SIZE(io), 0, 0, 0xffffffff);
/* RAM and IO: exclude kernel */
subtract_range(mem, ARRAY_SIZE(mem), __pa(KERNEL_START), __pa(KERNEL_END));
subtract_range(io, ARRAY_SIZE(io), __pa(KERNEL_START), __pa(KERNEL_END));
#ifdef CONFIG_XIP_KERNEL
/* RAM and IO: exclude xip */
subtract_range(mem, ARRAY_SIZE(mem), CONFIG_XIP_PHYS_ADDR, __pa(_exiprom));
subtract_range(io, ARRAY_SIZE(io), CONFIG_XIP_PHYS_ADDR, __pa(_exiprom));
#endif
#ifndef CONFIG_CPU_V7M
/* RAM and IO: exclude vectors */
subtract_range(mem, ARRAY_SIZE(mem), vectors_base, vectors_base + 2 * PAGE_SIZE);
subtract_range(io, ARRAY_SIZE(io), vectors_base, vectors_base + 2 * PAGE_SIZE);
#endif
/* IO: exclude RAM */
for (i = 0; i < ARRAY_SIZE(mem); i++)
subtract_range(io, ARRAY_SIZE(io), mem[i].start, mem[i].end);
/* Now program MPU */
#ifdef CONFIG_XIP_KERNEL
/* ROM */
err |= pmsav8_setup_fixed(PMSAv8_XIP_REGION, CONFIG_XIP_PHYS_ADDR, __pa(_exiprom));
#endif
/* Kernel */
err |= pmsav8_setup_fixed(region++, __pa(KERNEL_START), __pa(KERNEL_END));
/* IO */
for (i = 0; i < ARRAY_SIZE(io); i++) {
if (!io[i].end)
continue;
err |= pmsav8_setup_io(region++, io[i].start, io[i].end);
}
/* RAM */
for (i = 0; i < ARRAY_SIZE(mem); i++) {
if (!mem[i].end)
continue;
err |= pmsav8_setup_ram(region++, mem[i].start, mem[i].end);
}
/* Vectors */
#ifndef CONFIG_CPU_V7M
err |= pmsav8_setup_vector(region++, vectors_base, vectors_base + 2 * PAGE_SIZE);
#endif
if (err)
pr_warn("MPU region initialization failure! %d", err);
else
pr_info("Using ARM PMSAv8 Compliant MPU. Used %d of %d regions\n",
mpu_rgn_info.used, mpu_max_regions);
}