9e368f2915
This adds support for running KVM guests in supervisor mode on those PPC970 processors that have a usable hypervisor mode. Unfortunately, Apple G5 machines have supervisor mode disabled (MSR[HV] is forced to 1), but the YDL PowerStation does have a usable hypervisor mode. There are several differences between the PPC970 and POWER7 in how guests are managed. These differences are accommodated using the CPU_FTR_ARCH_201 (PPC970) and CPU_FTR_ARCH_206 (POWER7) CPU feature bits. Notably, on PPC970: * The LPCR, LPID or RMOR registers don't exist, and the functions of those registers are provided by bits in HID4 and one bit in HID0. * External interrupts can be directed to the hypervisor, but unlike POWER7 they are masked by MSR[EE] in non-hypervisor modes and use SRR0/1 not HSRR0/1. * There is no virtual RMA (VRMA) mode; the guest must use an RMO (real mode offset) area. * The TLB entries are not tagged with the LPID, so it is necessary to flush the whole TLB on partition switch. Furthermore, when switching partitions we have to ensure that no other CPU is executing the tlbie or tlbsync instructions in either the old or the new partition, otherwise undefined behaviour can occur. * The PMU has 8 counters (PMC registers) rather than 6. * The DSCR, PURR, SPURR, AMR, AMOR, UAMOR registers don't exist. * The SLB has 64 entries rather than 32. * There is no mediated external interrupt facility, so if we switch to a guest that has a virtual external interrupt pending but the guest has MSR[EE] = 0, we have to arrange to have an interrupt pending for it so that we can get control back once it re-enables interrupts. We do that by sending ourselves an IPI with smp_send_reschedule after hard-disabling interrupts. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
167 lines
4.4 KiB
ArmAsm
167 lines
4.4 KiB
ArmAsm
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*
|
|
* Copyright 2011 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
|
|
*
|
|
* Derived from book3s_interrupts.S, which is:
|
|
* Copyright SUSE Linux Products GmbH 2009
|
|
*
|
|
* Authors: Alexander Graf <agraf@suse.de>
|
|
*/
|
|
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/kvm_asm.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/page.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/exception-64s.h>
|
|
#include <asm/ppc-opcode.h>
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* Guest entry / exit code that is in kernel module memory (vmalloc) *
|
|
* *
|
|
****************************************************************************/
|
|
|
|
/* Registers:
|
|
* r4: vcpu pointer
|
|
*/
|
|
_GLOBAL(__kvmppc_vcore_entry)
|
|
|
|
/* Write correct stack frame */
|
|
mflr r0
|
|
std r0,PPC_LR_STKOFF(r1)
|
|
|
|
/* Save host state to the stack */
|
|
stdu r1, -SWITCH_FRAME_SIZE(r1)
|
|
|
|
/* Save non-volatile registers (r14 - r31) */
|
|
SAVE_NVGPRS(r1)
|
|
|
|
/* Save host DSCR */
|
|
BEGIN_FTR_SECTION
|
|
mfspr r3, SPRN_DSCR
|
|
std r3, HSTATE_DSCR(r13)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
|
|
|
|
/* Save host DABR */
|
|
mfspr r3, SPRN_DABR
|
|
std r3, HSTATE_DABR(r13)
|
|
|
|
/* Hard-disable interrupts */
|
|
mfmsr r10
|
|
std r10, HSTATE_HOST_MSR(r13)
|
|
rldicl r10,r10,48,1
|
|
rotldi r10,r10,16
|
|
mtmsrd r10,1
|
|
|
|
/* Save host PMU registers and load guest PMU registers */
|
|
/* R4 is live here (vcpu pointer) but not r3 or r5 */
|
|
li r3, 1
|
|
sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
|
|
mfspr r7, SPRN_MMCR0 /* save MMCR0 */
|
|
mtspr SPRN_MMCR0, r3 /* freeze all counters, disable interrupts */
|
|
isync
|
|
ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
|
|
lbz r5, LPPACA_PMCINUSE(r3)
|
|
cmpwi r5, 0
|
|
beq 31f /* skip if not */
|
|
mfspr r5, SPRN_MMCR1
|
|
mfspr r6, SPRN_MMCRA
|
|
std r7, HSTATE_MMCR(r13)
|
|
std r5, HSTATE_MMCR + 8(r13)
|
|
std r6, HSTATE_MMCR + 16(r13)
|
|
mfspr r3, SPRN_PMC1
|
|
mfspr r5, SPRN_PMC2
|
|
mfspr r6, SPRN_PMC3
|
|
mfspr r7, SPRN_PMC4
|
|
mfspr r8, SPRN_PMC5
|
|
mfspr r9, SPRN_PMC6
|
|
BEGIN_FTR_SECTION
|
|
mfspr r10, SPRN_PMC7
|
|
mfspr r11, SPRN_PMC8
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
|
|
stw r3, HSTATE_PMC(r13)
|
|
stw r5, HSTATE_PMC + 4(r13)
|
|
stw r6, HSTATE_PMC + 8(r13)
|
|
stw r7, HSTATE_PMC + 12(r13)
|
|
stw r8, HSTATE_PMC + 16(r13)
|
|
stw r9, HSTATE_PMC + 20(r13)
|
|
BEGIN_FTR_SECTION
|
|
stw r10, HSTATE_PMC + 24(r13)
|
|
stw r11, HSTATE_PMC + 28(r13)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
|
|
31:
|
|
|
|
/*
|
|
* Put whatever is in the decrementer into the
|
|
* hypervisor decrementer.
|
|
*/
|
|
mfspr r8,SPRN_DEC
|
|
mftb r7
|
|
mtspr SPRN_HDEC,r8
|
|
extsw r8,r8
|
|
add r8,r8,r7
|
|
std r8,HSTATE_DECEXP(r13)
|
|
|
|
/*
|
|
* On PPC970, if the guest vcpu has an external interrupt pending,
|
|
* send ourselves an IPI so as to interrupt the guest once it
|
|
* enables interrupts. (It must have interrupts disabled,
|
|
* otherwise we would already have delivered the interrupt.)
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
ld r0, VCPU_PENDING_EXC(r4)
|
|
li r7, (1 << BOOK3S_IRQPRIO_EXTERNAL)
|
|
oris r7, r7, (1 << BOOK3S_IRQPRIO_EXTERNAL_LEVEL)@h
|
|
and. r0, r0, r7
|
|
beq 32f
|
|
mr r31, r4
|
|
lhz r3, PACAPACAINDEX(r13)
|
|
bl smp_send_reschedule
|
|
nop
|
|
mr r4, r31
|
|
32:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
|
|
|
|
/* Jump to partition switch code */
|
|
bl .kvmppc_hv_entry_trampoline
|
|
nop
|
|
|
|
/*
|
|
* We return here in virtual mode after the guest exits
|
|
* with something that we can't handle in real mode.
|
|
* Interrupts are enabled again at this point.
|
|
*/
|
|
|
|
.global kvmppc_handler_highmem
|
|
kvmppc_handler_highmem:
|
|
|
|
/*
|
|
* Register usage at this point:
|
|
*
|
|
* R1 = host R1
|
|
* R2 = host R2
|
|
* R12 = exit handler id
|
|
* R13 = PACA
|
|
*/
|
|
|
|
/* Restore non-volatile host registers (r14 - r31) */
|
|
REST_NVGPRS(r1)
|
|
|
|
addi r1, r1, SWITCH_FRAME_SIZE
|
|
ld r0, PPC_LR_STKOFF(r1)
|
|
mtlr r0
|
|
blr
|