d58168763f
Rework table reference counting. The existing code uses a reference counter. When the last reference is dropped and the counter reaches zero, the table destructor is called. Table reference counters are acquired/released from upcalls from other kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all). If the reference counter reaches zero in one of the upcalls, the table destructor is called from almost random kernel code. This leads to various problems: * dm_any_congested being called under a spinlock, which calls the destructor, which calls some sleeping function. * the destructor attempting to take a lock that is already taken by the same process. * stale reference from some other kernel code keeps the table constructed, which keeps some devices open, even after successful return from "dmsetup remove". This can confuse lvm and prevent closing of underlying devices or reusing device minor numbers. The patch changes reference counting so that the table destructor can be called only at predetermined places. The table has always exactly one reference from either mapped_device->map or hash_cell->new_map. After this patch, this reference is not counted in table->holders. A pair of dm_create_table/dm_destroy_table functions is used for table creation/destruction. Temporary references from the other code increase table->holders. A pair of dm_table_get/dm_table_put functions is used to manipulate it. When the table is about to be destroyed, we wait for table->holders to reach 0. Then, we call the table destructor. We use active waiting with msleep(1), because the situation happens rarely (to one user in 5 years) and removing the device isn't performance-critical task: the user doesn't care if it takes one tick more or not. This way, the destructor is called only at specific points (dm_table_destroy function) and the above problems associated with lazy destruction can't happen. Finally remove the temporary protection added to dm_any_congested(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
1036 lines
22 KiB
C
1036 lines
22 KiB
C
/*
|
|
* Copyright (C) 2001 Sistina Software (UK) Limited.
|
|
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
|
|
*
|
|
* This file is released under the GPL.
|
|
*/
|
|
|
|
#include "dm.h"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/namei.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/atomic.h>
|
|
|
|
#define DM_MSG_PREFIX "table"
|
|
|
|
#define MAX_DEPTH 16
|
|
#define NODE_SIZE L1_CACHE_BYTES
|
|
#define KEYS_PER_NODE (NODE_SIZE / sizeof(sector_t))
|
|
#define CHILDREN_PER_NODE (KEYS_PER_NODE + 1)
|
|
|
|
/*
|
|
* The table has always exactly one reference from either mapped_device->map
|
|
* or hash_cell->new_map. This reference is not counted in table->holders.
|
|
* A pair of dm_create_table/dm_destroy_table functions is used for table
|
|
* creation/destruction.
|
|
*
|
|
* Temporary references from the other code increase table->holders. A pair
|
|
* of dm_table_get/dm_table_put functions is used to manipulate it.
|
|
*
|
|
* When the table is about to be destroyed, we wait for table->holders to
|
|
* drop to zero.
|
|
*/
|
|
|
|
struct dm_table {
|
|
struct mapped_device *md;
|
|
atomic_t holders;
|
|
|
|
/* btree table */
|
|
unsigned int depth;
|
|
unsigned int counts[MAX_DEPTH]; /* in nodes */
|
|
sector_t *index[MAX_DEPTH];
|
|
|
|
unsigned int num_targets;
|
|
unsigned int num_allocated;
|
|
sector_t *highs;
|
|
struct dm_target *targets;
|
|
|
|
unsigned barriers_supported:1;
|
|
|
|
/*
|
|
* Indicates the rw permissions for the new logical
|
|
* device. This should be a combination of FMODE_READ
|
|
* and FMODE_WRITE.
|
|
*/
|
|
fmode_t mode;
|
|
|
|
/* a list of devices used by this table */
|
|
struct list_head devices;
|
|
|
|
/*
|
|
* These are optimistic limits taken from all the
|
|
* targets, some targets will need smaller limits.
|
|
*/
|
|
struct io_restrictions limits;
|
|
|
|
/* events get handed up using this callback */
|
|
void (*event_fn)(void *);
|
|
void *event_context;
|
|
};
|
|
|
|
/*
|
|
* Similar to ceiling(log_size(n))
|
|
*/
|
|
static unsigned int int_log(unsigned int n, unsigned int base)
|
|
{
|
|
int result = 0;
|
|
|
|
while (n > 1) {
|
|
n = dm_div_up(n, base);
|
|
result++;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Returns the minimum that is _not_ zero, unless both are zero.
|
|
*/
|
|
#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
|
|
|
|
/*
|
|
* Combine two io_restrictions, always taking the lower value.
|
|
*/
|
|
static void combine_restrictions_low(struct io_restrictions *lhs,
|
|
struct io_restrictions *rhs)
|
|
{
|
|
lhs->max_sectors =
|
|
min_not_zero(lhs->max_sectors, rhs->max_sectors);
|
|
|
|
lhs->max_phys_segments =
|
|
min_not_zero(lhs->max_phys_segments, rhs->max_phys_segments);
|
|
|
|
lhs->max_hw_segments =
|
|
min_not_zero(lhs->max_hw_segments, rhs->max_hw_segments);
|
|
|
|
lhs->hardsect_size = max(lhs->hardsect_size, rhs->hardsect_size);
|
|
|
|
lhs->max_segment_size =
|
|
min_not_zero(lhs->max_segment_size, rhs->max_segment_size);
|
|
|
|
lhs->max_hw_sectors =
|
|
min_not_zero(lhs->max_hw_sectors, rhs->max_hw_sectors);
|
|
|
|
lhs->seg_boundary_mask =
|
|
min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask);
|
|
|
|
lhs->bounce_pfn = min_not_zero(lhs->bounce_pfn, rhs->bounce_pfn);
|
|
|
|
lhs->no_cluster |= rhs->no_cluster;
|
|
}
|
|
|
|
/*
|
|
* Calculate the index of the child node of the n'th node k'th key.
|
|
*/
|
|
static inline unsigned int get_child(unsigned int n, unsigned int k)
|
|
{
|
|
return (n * CHILDREN_PER_NODE) + k;
|
|
}
|
|
|
|
/*
|
|
* Return the n'th node of level l from table t.
|
|
*/
|
|
static inline sector_t *get_node(struct dm_table *t,
|
|
unsigned int l, unsigned int n)
|
|
{
|
|
return t->index[l] + (n * KEYS_PER_NODE);
|
|
}
|
|
|
|
/*
|
|
* Return the highest key that you could lookup from the n'th
|
|
* node on level l of the btree.
|
|
*/
|
|
static sector_t high(struct dm_table *t, unsigned int l, unsigned int n)
|
|
{
|
|
for (; l < t->depth - 1; l++)
|
|
n = get_child(n, CHILDREN_PER_NODE - 1);
|
|
|
|
if (n >= t->counts[l])
|
|
return (sector_t) - 1;
|
|
|
|
return get_node(t, l, n)[KEYS_PER_NODE - 1];
|
|
}
|
|
|
|
/*
|
|
* Fills in a level of the btree based on the highs of the level
|
|
* below it.
|
|
*/
|
|
static int setup_btree_index(unsigned int l, struct dm_table *t)
|
|
{
|
|
unsigned int n, k;
|
|
sector_t *node;
|
|
|
|
for (n = 0U; n < t->counts[l]; n++) {
|
|
node = get_node(t, l, n);
|
|
|
|
for (k = 0U; k < KEYS_PER_NODE; k++)
|
|
node[k] = high(t, l + 1, get_child(n, k));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void *dm_vcalloc(unsigned long nmemb, unsigned long elem_size)
|
|
{
|
|
unsigned long size;
|
|
void *addr;
|
|
|
|
/*
|
|
* Check that we're not going to overflow.
|
|
*/
|
|
if (nmemb > (ULONG_MAX / elem_size))
|
|
return NULL;
|
|
|
|
size = nmemb * elem_size;
|
|
addr = vmalloc(size);
|
|
if (addr)
|
|
memset(addr, 0, size);
|
|
|
|
return addr;
|
|
}
|
|
|
|
/*
|
|
* highs, and targets are managed as dynamic arrays during a
|
|
* table load.
|
|
*/
|
|
static int alloc_targets(struct dm_table *t, unsigned int num)
|
|
{
|
|
sector_t *n_highs;
|
|
struct dm_target *n_targets;
|
|
int n = t->num_targets;
|
|
|
|
/*
|
|
* Allocate both the target array and offset array at once.
|
|
* Append an empty entry to catch sectors beyond the end of
|
|
* the device.
|
|
*/
|
|
n_highs = (sector_t *) dm_vcalloc(num + 1, sizeof(struct dm_target) +
|
|
sizeof(sector_t));
|
|
if (!n_highs)
|
|
return -ENOMEM;
|
|
|
|
n_targets = (struct dm_target *) (n_highs + num);
|
|
|
|
if (n) {
|
|
memcpy(n_highs, t->highs, sizeof(*n_highs) * n);
|
|
memcpy(n_targets, t->targets, sizeof(*n_targets) * n);
|
|
}
|
|
|
|
memset(n_highs + n, -1, sizeof(*n_highs) * (num - n));
|
|
vfree(t->highs);
|
|
|
|
t->num_allocated = num;
|
|
t->highs = n_highs;
|
|
t->targets = n_targets;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm_table_create(struct dm_table **result, fmode_t mode,
|
|
unsigned num_targets, struct mapped_device *md)
|
|
{
|
|
struct dm_table *t = kzalloc(sizeof(*t), GFP_KERNEL);
|
|
|
|
if (!t)
|
|
return -ENOMEM;
|
|
|
|
INIT_LIST_HEAD(&t->devices);
|
|
atomic_set(&t->holders, 0);
|
|
t->barriers_supported = 1;
|
|
|
|
if (!num_targets)
|
|
num_targets = KEYS_PER_NODE;
|
|
|
|
num_targets = dm_round_up(num_targets, KEYS_PER_NODE);
|
|
|
|
if (alloc_targets(t, num_targets)) {
|
|
kfree(t);
|
|
t = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
t->mode = mode;
|
|
t->md = md;
|
|
*result = t;
|
|
return 0;
|
|
}
|
|
|
|
static void free_devices(struct list_head *devices)
|
|
{
|
|
struct list_head *tmp, *next;
|
|
|
|
list_for_each_safe(tmp, next, devices) {
|
|
struct dm_dev_internal *dd =
|
|
list_entry(tmp, struct dm_dev_internal, list);
|
|
kfree(dd);
|
|
}
|
|
}
|
|
|
|
void dm_table_destroy(struct dm_table *t)
|
|
{
|
|
unsigned int i;
|
|
|
|
while (atomic_read(&t->holders))
|
|
msleep(1);
|
|
smp_mb();
|
|
|
|
/* free the indexes (see dm_table_complete) */
|
|
if (t->depth >= 2)
|
|
vfree(t->index[t->depth - 2]);
|
|
|
|
/* free the targets */
|
|
for (i = 0; i < t->num_targets; i++) {
|
|
struct dm_target *tgt = t->targets + i;
|
|
|
|
if (tgt->type->dtr)
|
|
tgt->type->dtr(tgt);
|
|
|
|
dm_put_target_type(tgt->type);
|
|
}
|
|
|
|
vfree(t->highs);
|
|
|
|
/* free the device list */
|
|
if (t->devices.next != &t->devices) {
|
|
DMWARN("devices still present during destroy: "
|
|
"dm_table_remove_device calls missing");
|
|
|
|
free_devices(&t->devices);
|
|
}
|
|
|
|
kfree(t);
|
|
}
|
|
|
|
void dm_table_get(struct dm_table *t)
|
|
{
|
|
atomic_inc(&t->holders);
|
|
}
|
|
|
|
void dm_table_put(struct dm_table *t)
|
|
{
|
|
if (!t)
|
|
return;
|
|
|
|
smp_mb__before_atomic_dec();
|
|
atomic_dec(&t->holders);
|
|
}
|
|
|
|
/*
|
|
* Checks to see if we need to extend highs or targets.
|
|
*/
|
|
static inline int check_space(struct dm_table *t)
|
|
{
|
|
if (t->num_targets >= t->num_allocated)
|
|
return alloc_targets(t, t->num_allocated * 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* See if we've already got a device in the list.
|
|
*/
|
|
static struct dm_dev_internal *find_device(struct list_head *l, dev_t dev)
|
|
{
|
|
struct dm_dev_internal *dd;
|
|
|
|
list_for_each_entry (dd, l, list)
|
|
if (dd->dm_dev.bdev->bd_dev == dev)
|
|
return dd;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Open a device so we can use it as a map destination.
|
|
*/
|
|
static int open_dev(struct dm_dev_internal *d, dev_t dev,
|
|
struct mapped_device *md)
|
|
{
|
|
static char *_claim_ptr = "I belong to device-mapper";
|
|
struct block_device *bdev;
|
|
|
|
int r;
|
|
|
|
BUG_ON(d->dm_dev.bdev);
|
|
|
|
bdev = open_by_devnum(dev, d->dm_dev.mode);
|
|
if (IS_ERR(bdev))
|
|
return PTR_ERR(bdev);
|
|
r = bd_claim_by_disk(bdev, _claim_ptr, dm_disk(md));
|
|
if (r)
|
|
blkdev_put(bdev, d->dm_dev.mode);
|
|
else
|
|
d->dm_dev.bdev = bdev;
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Close a device that we've been using.
|
|
*/
|
|
static void close_dev(struct dm_dev_internal *d, struct mapped_device *md)
|
|
{
|
|
if (!d->dm_dev.bdev)
|
|
return;
|
|
|
|
bd_release_from_disk(d->dm_dev.bdev, dm_disk(md));
|
|
blkdev_put(d->dm_dev.bdev, d->dm_dev.mode);
|
|
d->dm_dev.bdev = NULL;
|
|
}
|
|
|
|
/*
|
|
* If possible, this checks an area of a destination device is valid.
|
|
*/
|
|
static int check_device_area(struct dm_dev_internal *dd, sector_t start,
|
|
sector_t len)
|
|
{
|
|
sector_t dev_size = dd->dm_dev.bdev->bd_inode->i_size >> SECTOR_SHIFT;
|
|
|
|
if (!dev_size)
|
|
return 1;
|
|
|
|
return ((start < dev_size) && (len <= (dev_size - start)));
|
|
}
|
|
|
|
/*
|
|
* This upgrades the mode on an already open dm_dev. Being
|
|
* careful to leave things as they were if we fail to reopen the
|
|
* device.
|
|
*/
|
|
static int upgrade_mode(struct dm_dev_internal *dd, fmode_t new_mode,
|
|
struct mapped_device *md)
|
|
{
|
|
int r;
|
|
struct dm_dev_internal dd_copy;
|
|
dev_t dev = dd->dm_dev.bdev->bd_dev;
|
|
|
|
dd_copy = *dd;
|
|
|
|
dd->dm_dev.mode |= new_mode;
|
|
dd->dm_dev.bdev = NULL;
|
|
r = open_dev(dd, dev, md);
|
|
if (!r)
|
|
close_dev(&dd_copy, md);
|
|
else
|
|
*dd = dd_copy;
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Add a device to the list, or just increment the usage count if
|
|
* it's already present.
|
|
*/
|
|
static int __table_get_device(struct dm_table *t, struct dm_target *ti,
|
|
const char *path, sector_t start, sector_t len,
|
|
fmode_t mode, struct dm_dev **result)
|
|
{
|
|
int r;
|
|
dev_t uninitialized_var(dev);
|
|
struct dm_dev_internal *dd;
|
|
unsigned int major, minor;
|
|
|
|
BUG_ON(!t);
|
|
|
|
if (sscanf(path, "%u:%u", &major, &minor) == 2) {
|
|
/* Extract the major/minor numbers */
|
|
dev = MKDEV(major, minor);
|
|
if (MAJOR(dev) != major || MINOR(dev) != minor)
|
|
return -EOVERFLOW;
|
|
} else {
|
|
/* convert the path to a device */
|
|
struct block_device *bdev = lookup_bdev(path);
|
|
|
|
if (IS_ERR(bdev))
|
|
return PTR_ERR(bdev);
|
|
dev = bdev->bd_dev;
|
|
bdput(bdev);
|
|
}
|
|
|
|
dd = find_device(&t->devices, dev);
|
|
if (!dd) {
|
|
dd = kmalloc(sizeof(*dd), GFP_KERNEL);
|
|
if (!dd)
|
|
return -ENOMEM;
|
|
|
|
dd->dm_dev.mode = mode;
|
|
dd->dm_dev.bdev = NULL;
|
|
|
|
if ((r = open_dev(dd, dev, t->md))) {
|
|
kfree(dd);
|
|
return r;
|
|
}
|
|
|
|
format_dev_t(dd->dm_dev.name, dev);
|
|
|
|
atomic_set(&dd->count, 0);
|
|
list_add(&dd->list, &t->devices);
|
|
|
|
} else if (dd->dm_dev.mode != (mode | dd->dm_dev.mode)) {
|
|
r = upgrade_mode(dd, mode, t->md);
|
|
if (r)
|
|
return r;
|
|
}
|
|
atomic_inc(&dd->count);
|
|
|
|
if (!check_device_area(dd, start, len)) {
|
|
DMWARN("device %s too small for target", path);
|
|
dm_put_device(ti, &dd->dm_dev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*result = &dd->dm_dev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev)
|
|
{
|
|
struct request_queue *q = bdev_get_queue(bdev);
|
|
struct io_restrictions *rs = &ti->limits;
|
|
char b[BDEVNAME_SIZE];
|
|
|
|
if (unlikely(!q)) {
|
|
DMWARN("%s: Cannot set limits for nonexistent device %s",
|
|
dm_device_name(ti->table->md), bdevname(bdev, b));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Combine the device limits low.
|
|
*
|
|
* FIXME: if we move an io_restriction struct
|
|
* into q this would just be a call to
|
|
* combine_restrictions_low()
|
|
*/
|
|
rs->max_sectors =
|
|
min_not_zero(rs->max_sectors, q->max_sectors);
|
|
|
|
/*
|
|
* Check if merge fn is supported.
|
|
* If not we'll force DM to use PAGE_SIZE or
|
|
* smaller I/O, just to be safe.
|
|
*/
|
|
|
|
if (q->merge_bvec_fn && !ti->type->merge)
|
|
rs->max_sectors =
|
|
min_not_zero(rs->max_sectors,
|
|
(unsigned int) (PAGE_SIZE >> 9));
|
|
|
|
rs->max_phys_segments =
|
|
min_not_zero(rs->max_phys_segments,
|
|
q->max_phys_segments);
|
|
|
|
rs->max_hw_segments =
|
|
min_not_zero(rs->max_hw_segments, q->max_hw_segments);
|
|
|
|
rs->hardsect_size = max(rs->hardsect_size, q->hardsect_size);
|
|
|
|
rs->max_segment_size =
|
|
min_not_zero(rs->max_segment_size, q->max_segment_size);
|
|
|
|
rs->max_hw_sectors =
|
|
min_not_zero(rs->max_hw_sectors, q->max_hw_sectors);
|
|
|
|
rs->seg_boundary_mask =
|
|
min_not_zero(rs->seg_boundary_mask,
|
|
q->seg_boundary_mask);
|
|
|
|
rs->bounce_pfn = min_not_zero(rs->bounce_pfn, q->bounce_pfn);
|
|
|
|
rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(dm_set_device_limits);
|
|
|
|
int dm_get_device(struct dm_target *ti, const char *path, sector_t start,
|
|
sector_t len, fmode_t mode, struct dm_dev **result)
|
|
{
|
|
int r = __table_get_device(ti->table, ti, path,
|
|
start, len, mode, result);
|
|
|
|
if (!r)
|
|
dm_set_device_limits(ti, (*result)->bdev);
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Decrement a devices use count and remove it if necessary.
|
|
*/
|
|
void dm_put_device(struct dm_target *ti, struct dm_dev *d)
|
|
{
|
|
struct dm_dev_internal *dd = container_of(d, struct dm_dev_internal,
|
|
dm_dev);
|
|
|
|
if (atomic_dec_and_test(&dd->count)) {
|
|
close_dev(dd, ti->table->md);
|
|
list_del(&dd->list);
|
|
kfree(dd);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Checks to see if the target joins onto the end of the table.
|
|
*/
|
|
static int adjoin(struct dm_table *table, struct dm_target *ti)
|
|
{
|
|
struct dm_target *prev;
|
|
|
|
if (!table->num_targets)
|
|
return !ti->begin;
|
|
|
|
prev = &table->targets[table->num_targets - 1];
|
|
return (ti->begin == (prev->begin + prev->len));
|
|
}
|
|
|
|
/*
|
|
* Used to dynamically allocate the arg array.
|
|
*/
|
|
static char **realloc_argv(unsigned *array_size, char **old_argv)
|
|
{
|
|
char **argv;
|
|
unsigned new_size;
|
|
|
|
new_size = *array_size ? *array_size * 2 : 64;
|
|
argv = kmalloc(new_size * sizeof(*argv), GFP_KERNEL);
|
|
if (argv) {
|
|
memcpy(argv, old_argv, *array_size * sizeof(*argv));
|
|
*array_size = new_size;
|
|
}
|
|
|
|
kfree(old_argv);
|
|
return argv;
|
|
}
|
|
|
|
/*
|
|
* Destructively splits up the argument list to pass to ctr.
|
|
*/
|
|
int dm_split_args(int *argc, char ***argvp, char *input)
|
|
{
|
|
char *start, *end = input, *out, **argv = NULL;
|
|
unsigned array_size = 0;
|
|
|
|
*argc = 0;
|
|
|
|
if (!input) {
|
|
*argvp = NULL;
|
|
return 0;
|
|
}
|
|
|
|
argv = realloc_argv(&array_size, argv);
|
|
if (!argv)
|
|
return -ENOMEM;
|
|
|
|
while (1) {
|
|
start = end;
|
|
|
|
/* Skip whitespace */
|
|
while (*start && isspace(*start))
|
|
start++;
|
|
|
|
if (!*start)
|
|
break; /* success, we hit the end */
|
|
|
|
/* 'out' is used to remove any back-quotes */
|
|
end = out = start;
|
|
while (*end) {
|
|
/* Everything apart from '\0' can be quoted */
|
|
if (*end == '\\' && *(end + 1)) {
|
|
*out++ = *(end + 1);
|
|
end += 2;
|
|
continue;
|
|
}
|
|
|
|
if (isspace(*end))
|
|
break; /* end of token */
|
|
|
|
*out++ = *end++;
|
|
}
|
|
|
|
/* have we already filled the array ? */
|
|
if ((*argc + 1) > array_size) {
|
|
argv = realloc_argv(&array_size, argv);
|
|
if (!argv)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* we know this is whitespace */
|
|
if (*end)
|
|
end++;
|
|
|
|
/* terminate the string and put it in the array */
|
|
*out = '\0';
|
|
argv[*argc] = start;
|
|
(*argc)++;
|
|
}
|
|
|
|
*argvp = argv;
|
|
return 0;
|
|
}
|
|
|
|
static void check_for_valid_limits(struct io_restrictions *rs)
|
|
{
|
|
if (!rs->max_sectors)
|
|
rs->max_sectors = SAFE_MAX_SECTORS;
|
|
if (!rs->max_hw_sectors)
|
|
rs->max_hw_sectors = SAFE_MAX_SECTORS;
|
|
if (!rs->max_phys_segments)
|
|
rs->max_phys_segments = MAX_PHYS_SEGMENTS;
|
|
if (!rs->max_hw_segments)
|
|
rs->max_hw_segments = MAX_HW_SEGMENTS;
|
|
if (!rs->hardsect_size)
|
|
rs->hardsect_size = 1 << SECTOR_SHIFT;
|
|
if (!rs->max_segment_size)
|
|
rs->max_segment_size = MAX_SEGMENT_SIZE;
|
|
if (!rs->seg_boundary_mask)
|
|
rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
|
|
if (!rs->bounce_pfn)
|
|
rs->bounce_pfn = -1;
|
|
}
|
|
|
|
int dm_table_add_target(struct dm_table *t, const char *type,
|
|
sector_t start, sector_t len, char *params)
|
|
{
|
|
int r = -EINVAL, argc;
|
|
char **argv;
|
|
struct dm_target *tgt;
|
|
|
|
if ((r = check_space(t)))
|
|
return r;
|
|
|
|
tgt = t->targets + t->num_targets;
|
|
memset(tgt, 0, sizeof(*tgt));
|
|
|
|
if (!len) {
|
|
DMERR("%s: zero-length target", dm_device_name(t->md));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tgt->type = dm_get_target_type(type);
|
|
if (!tgt->type) {
|
|
DMERR("%s: %s: unknown target type", dm_device_name(t->md),
|
|
type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tgt->table = t;
|
|
tgt->begin = start;
|
|
tgt->len = len;
|
|
tgt->error = "Unknown error";
|
|
|
|
/*
|
|
* Does this target adjoin the previous one ?
|
|
*/
|
|
if (!adjoin(t, tgt)) {
|
|
tgt->error = "Gap in table";
|
|
r = -EINVAL;
|
|
goto bad;
|
|
}
|
|
|
|
r = dm_split_args(&argc, &argv, params);
|
|
if (r) {
|
|
tgt->error = "couldn't split parameters (insufficient memory)";
|
|
goto bad;
|
|
}
|
|
|
|
r = tgt->type->ctr(tgt, argc, argv);
|
|
kfree(argv);
|
|
if (r)
|
|
goto bad;
|
|
|
|
t->highs[t->num_targets++] = tgt->begin + tgt->len - 1;
|
|
|
|
/* FIXME: the plan is to combine high here and then have
|
|
* the merge fn apply the target level restrictions. */
|
|
combine_restrictions_low(&t->limits, &tgt->limits);
|
|
|
|
if (!(tgt->type->features & DM_TARGET_SUPPORTS_BARRIERS))
|
|
t->barriers_supported = 0;
|
|
|
|
return 0;
|
|
|
|
bad:
|
|
DMERR("%s: %s: %s", dm_device_name(t->md), type, tgt->error);
|
|
dm_put_target_type(tgt->type);
|
|
return r;
|
|
}
|
|
|
|
static int setup_indexes(struct dm_table *t)
|
|
{
|
|
int i;
|
|
unsigned int total = 0;
|
|
sector_t *indexes;
|
|
|
|
/* allocate the space for *all* the indexes */
|
|
for (i = t->depth - 2; i >= 0; i--) {
|
|
t->counts[i] = dm_div_up(t->counts[i + 1], CHILDREN_PER_NODE);
|
|
total += t->counts[i];
|
|
}
|
|
|
|
indexes = (sector_t *) dm_vcalloc(total, (unsigned long) NODE_SIZE);
|
|
if (!indexes)
|
|
return -ENOMEM;
|
|
|
|
/* set up internal nodes, bottom-up */
|
|
for (i = t->depth - 2; i >= 0; i--) {
|
|
t->index[i] = indexes;
|
|
indexes += (KEYS_PER_NODE * t->counts[i]);
|
|
setup_btree_index(i, t);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Builds the btree to index the map.
|
|
*/
|
|
int dm_table_complete(struct dm_table *t)
|
|
{
|
|
int r = 0;
|
|
unsigned int leaf_nodes;
|
|
|
|
check_for_valid_limits(&t->limits);
|
|
|
|
/*
|
|
* We only support barriers if there is exactly one underlying device.
|
|
*/
|
|
if (!list_is_singular(&t->devices))
|
|
t->barriers_supported = 0;
|
|
|
|
/* how many indexes will the btree have ? */
|
|
leaf_nodes = dm_div_up(t->num_targets, KEYS_PER_NODE);
|
|
t->depth = 1 + int_log(leaf_nodes, CHILDREN_PER_NODE);
|
|
|
|
/* leaf layer has already been set up */
|
|
t->counts[t->depth - 1] = leaf_nodes;
|
|
t->index[t->depth - 1] = t->highs;
|
|
|
|
if (t->depth >= 2)
|
|
r = setup_indexes(t);
|
|
|
|
return r;
|
|
}
|
|
|
|
static DEFINE_MUTEX(_event_lock);
|
|
void dm_table_event_callback(struct dm_table *t,
|
|
void (*fn)(void *), void *context)
|
|
{
|
|
mutex_lock(&_event_lock);
|
|
t->event_fn = fn;
|
|
t->event_context = context;
|
|
mutex_unlock(&_event_lock);
|
|
}
|
|
|
|
void dm_table_event(struct dm_table *t)
|
|
{
|
|
/*
|
|
* You can no longer call dm_table_event() from interrupt
|
|
* context, use a bottom half instead.
|
|
*/
|
|
BUG_ON(in_interrupt());
|
|
|
|
mutex_lock(&_event_lock);
|
|
if (t->event_fn)
|
|
t->event_fn(t->event_context);
|
|
mutex_unlock(&_event_lock);
|
|
}
|
|
|
|
sector_t dm_table_get_size(struct dm_table *t)
|
|
{
|
|
return t->num_targets ? (t->highs[t->num_targets - 1] + 1) : 0;
|
|
}
|
|
|
|
struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index)
|
|
{
|
|
if (index >= t->num_targets)
|
|
return NULL;
|
|
|
|
return t->targets + index;
|
|
}
|
|
|
|
/*
|
|
* Search the btree for the correct target.
|
|
*
|
|
* Caller should check returned pointer with dm_target_is_valid()
|
|
* to trap I/O beyond end of device.
|
|
*/
|
|
struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector)
|
|
{
|
|
unsigned int l, n = 0, k = 0;
|
|
sector_t *node;
|
|
|
|
for (l = 0; l < t->depth; l++) {
|
|
n = get_child(n, k);
|
|
node = get_node(t, l, n);
|
|
|
|
for (k = 0; k < KEYS_PER_NODE; k++)
|
|
if (node[k] >= sector)
|
|
break;
|
|
}
|
|
|
|
return &t->targets[(KEYS_PER_NODE * n) + k];
|
|
}
|
|
|
|
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q)
|
|
{
|
|
/*
|
|
* Make sure we obey the optimistic sub devices
|
|
* restrictions.
|
|
*/
|
|
blk_queue_max_sectors(q, t->limits.max_sectors);
|
|
q->max_phys_segments = t->limits.max_phys_segments;
|
|
q->max_hw_segments = t->limits.max_hw_segments;
|
|
q->hardsect_size = t->limits.hardsect_size;
|
|
q->max_segment_size = t->limits.max_segment_size;
|
|
q->max_hw_sectors = t->limits.max_hw_sectors;
|
|
q->seg_boundary_mask = t->limits.seg_boundary_mask;
|
|
q->bounce_pfn = t->limits.bounce_pfn;
|
|
|
|
if (t->limits.no_cluster)
|
|
queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
|
|
else
|
|
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
|
|
|
|
}
|
|
|
|
unsigned int dm_table_get_num_targets(struct dm_table *t)
|
|
{
|
|
return t->num_targets;
|
|
}
|
|
|
|
struct list_head *dm_table_get_devices(struct dm_table *t)
|
|
{
|
|
return &t->devices;
|
|
}
|
|
|
|
fmode_t dm_table_get_mode(struct dm_table *t)
|
|
{
|
|
return t->mode;
|
|
}
|
|
|
|
static void suspend_targets(struct dm_table *t, unsigned postsuspend)
|
|
{
|
|
int i = t->num_targets;
|
|
struct dm_target *ti = t->targets;
|
|
|
|
while (i--) {
|
|
if (postsuspend) {
|
|
if (ti->type->postsuspend)
|
|
ti->type->postsuspend(ti);
|
|
} else if (ti->type->presuspend)
|
|
ti->type->presuspend(ti);
|
|
|
|
ti++;
|
|
}
|
|
}
|
|
|
|
void dm_table_presuspend_targets(struct dm_table *t)
|
|
{
|
|
if (!t)
|
|
return;
|
|
|
|
suspend_targets(t, 0);
|
|
}
|
|
|
|
void dm_table_postsuspend_targets(struct dm_table *t)
|
|
{
|
|
if (!t)
|
|
return;
|
|
|
|
suspend_targets(t, 1);
|
|
}
|
|
|
|
int dm_table_resume_targets(struct dm_table *t)
|
|
{
|
|
int i, r = 0;
|
|
|
|
for (i = 0; i < t->num_targets; i++) {
|
|
struct dm_target *ti = t->targets + i;
|
|
|
|
if (!ti->type->preresume)
|
|
continue;
|
|
|
|
r = ti->type->preresume(ti);
|
|
if (r)
|
|
return r;
|
|
}
|
|
|
|
for (i = 0; i < t->num_targets; i++) {
|
|
struct dm_target *ti = t->targets + i;
|
|
|
|
if (ti->type->resume)
|
|
ti->type->resume(ti);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm_table_any_congested(struct dm_table *t, int bdi_bits)
|
|
{
|
|
struct dm_dev_internal *dd;
|
|
struct list_head *devices = dm_table_get_devices(t);
|
|
int r = 0;
|
|
|
|
list_for_each_entry(dd, devices, list) {
|
|
struct request_queue *q = bdev_get_queue(dd->dm_dev.bdev);
|
|
char b[BDEVNAME_SIZE];
|
|
|
|
if (likely(q))
|
|
r |= bdi_congested(&q->backing_dev_info, bdi_bits);
|
|
else
|
|
DMWARN_LIMIT("%s: any_congested: nonexistent device %s",
|
|
dm_device_name(t->md),
|
|
bdevname(dd->dm_dev.bdev, b));
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
void dm_table_unplug_all(struct dm_table *t)
|
|
{
|
|
struct dm_dev_internal *dd;
|
|
struct list_head *devices = dm_table_get_devices(t);
|
|
|
|
list_for_each_entry(dd, devices, list) {
|
|
struct request_queue *q = bdev_get_queue(dd->dm_dev.bdev);
|
|
char b[BDEVNAME_SIZE];
|
|
|
|
if (likely(q))
|
|
blk_unplug(q);
|
|
else
|
|
DMWARN_LIMIT("%s: Cannot unplug nonexistent device %s",
|
|
dm_device_name(t->md),
|
|
bdevname(dd->dm_dev.bdev, b));
|
|
}
|
|
}
|
|
|
|
struct mapped_device *dm_table_get_md(struct dm_table *t)
|
|
{
|
|
dm_get(t->md);
|
|
|
|
return t->md;
|
|
}
|
|
|
|
int dm_table_barrier_ok(struct dm_table *t)
|
|
{
|
|
return t->barriers_supported;
|
|
}
|
|
EXPORT_SYMBOL(dm_table_barrier_ok);
|
|
|
|
EXPORT_SYMBOL(dm_vcalloc);
|
|
EXPORT_SYMBOL(dm_get_device);
|
|
EXPORT_SYMBOL(dm_put_device);
|
|
EXPORT_SYMBOL(dm_table_event);
|
|
EXPORT_SYMBOL(dm_table_get_size);
|
|
EXPORT_SYMBOL(dm_table_get_mode);
|
|
EXPORT_SYMBOL(dm_table_get_md);
|
|
EXPORT_SYMBOL(dm_table_put);
|
|
EXPORT_SYMBOL(dm_table_get);
|
|
EXPORT_SYMBOL(dm_table_unplug_all);
|