OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3f8befec95
linux/drivers/net/wireless/libertas/if_cs.c
Marek Vasut dc7d243d75 Add support for CF8381 WiFi card. 
A detection function was added for identifying CF8381.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:57:15 -04:00

1021 lines
26 KiB
C
Raw Blame History

/*
Driver for the Marvell 8385 based compact flash WLAN cards.
(C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <linux/io.h>
#define DRV_NAME "libertas_cs"
#include "decl.h"
#include "defs.h"
#include "dev.h"
/********************************************************************/
/* Module stuff */
/********************************************************************/
MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
MODULE_LICENSE("GPL");
/********************************************************************/
/* Data structures */
/********************************************************************/
struct if_cs_card {
struct pcmcia_device *p_dev;
struct lbs_private *priv;
void __iomem *iobase;
};
/********************************************************************/
/* Hardware access */
/********************************************************************/
/* This define enables wrapper functions which allow you
to dump all register accesses. You normally won't this,
except for development */
/* #define DEBUG_IO */
#ifdef DEBUG_IO
static int debug_output = 0;
#else
/* This way the compiler optimizes the printk's away */
#define debug_output 0
#endif
static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
{
unsigned int val = ioread8(card->iobase + reg);
if (debug_output)
printk(KERN_INFO "inb %08x<%02x\n", reg, val);
return val;
}
static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
{
unsigned int val = ioread16(card->iobase + reg);
if (debug_output)
printk(KERN_INFO "inw %08x<%04x\n", reg, val);
return val;
}
static inline void if_cs_read16_rep(
struct if_cs_card *card,
uint reg,
void *buf,
unsigned long count)
{
if (debug_output)
printk(KERN_INFO "insw %08x<(0x%lx words)\n",
reg, count);
ioread16_rep(card->iobase + reg, buf, count);
}
static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
{
if (debug_output)
printk(KERN_INFO "outb %08x>%02x\n", reg, val);
iowrite8(val, card->iobase + reg);
}
static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
{
if (debug_output)
printk(KERN_INFO "outw %08x>%04x\n", reg, val);
iowrite16(val, card->iobase + reg);
}
static inline void if_cs_write16_rep(
struct if_cs_card *card,
uint reg,
const void *buf,
unsigned long count)
{
if (debug_output)
printk(KERN_INFO "outsw %08x>(0x%lx words)\n",
reg, count);
iowrite16_rep(card->iobase + reg, buf, count);
}
/*
* I know that polling/delaying is frowned upon. However, this procedure
* with polling is needed while downloading the firmware. At this stage,
* the hardware does unfortunately not create any interrupts.
*
* Fortunately, this function is never used once the firmware is in
* the card. :-)
*
* As a reference, see the "Firmware Specification v5.1", page 18
* and 19. I did not follow their suggested timing to the word,
* but this works nice & fast anyway.
*/
static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
{
int i;
for (i = 0; i < 100000; i++) {
u8 val = if_cs_read8(card, addr);
if (val == reg)
return 0;
udelay(5);
}
return -ETIME;
}
/*
* First the bitmasks for the host/card interrupt/status registers:
*/
#define IF_CS_BIT_TX 0x0001
#define IF_CS_BIT_RX 0x0002
#define IF_CS_BIT_COMMAND 0x0004
#define IF_CS_BIT_RESP 0x0008
#define IF_CS_BIT_EVENT 0x0010
#define IF_CS_BIT_MASK 0x001f
/*
* It's not really clear to me what the host status register is for. It
* needs to be set almost in union with "host int cause". The following
* bits from above are used:
*
* IF_CS_BIT_TX driver downloaded a data packet
* IF_CS_BIT_RX driver got a data packet
* IF_CS_BIT_COMMAND driver downloaded a command
* IF_CS_BIT_RESP not used (has some meaning with powerdown)
* IF_CS_BIT_EVENT driver read a host event
*/
#define IF_CS_HOST_STATUS 0x00000000
/*
* With the host int cause register can the host (that is, Linux) cause
* an interrupt in the firmware, to tell the firmware about those events:
*
* IF_CS_BIT_TX a data packet has been downloaded
* IF_CS_BIT_RX a received data packet has retrieved
* IF_CS_BIT_COMMAND a firmware block or a command has been downloaded
* IF_CS_BIT_RESP not used (has some meaning with powerdown)
* IF_CS_BIT_EVENT a host event (link lost etc) has been retrieved
*/
#define IF_CS_HOST_INT_CAUSE 0x00000002
/*
* The host int mask register is used to enable/disable interrupt. However,
* I have the suspicion that disabled interrupts are lost.
*/
#define IF_CS_HOST_INT_MASK 0x00000004
/*
* Used to send or receive data packets:
*/
#define IF_CS_WRITE 0x00000016
#define IF_CS_WRITE_LEN 0x00000014
#define IF_CS_READ 0x00000010
#define IF_CS_READ_LEN 0x00000024
/*
* Used to send commands (and to send firmware block) and to
* receive command responses:
*/
#define IF_CS_CMD 0x0000001A
#define IF_CS_CMD_LEN 0x00000018
#define IF_CS_RESP 0x00000012
#define IF_CS_RESP_LEN 0x00000030
/*
* The card status registers shows what the card/firmware actually
* accepts:
*
* IF_CS_BIT_TX you may send a data packet
* IF_CS_BIT_RX you may retrieve a data packet
* IF_CS_BIT_COMMAND you may send a command
* IF_CS_BIT_RESP you may retrieve a command response
* IF_CS_BIT_EVENT the card has a event for use (link lost, snr low etc)
*
* When reading this register several times, you will get back the same
* results --- with one exception: the IF_CS_BIT_EVENT clear itself
* automatically.
*
* Not that we don't rely on BIT_RX,_BIT_RESP or BIT_EVENT because
* we handle this via the card int cause register.
*/
#define IF_CS_CARD_STATUS 0x00000020
#define IF_CS_CARD_STATUS_MASK 0x7f00
/*
* The card int cause register is used by the card/firmware to notify us
* about the following events:
*
* IF_CS_BIT_TX a data packet has successfully been sentx
* IF_CS_BIT_RX a data packet has been received and can be retrieved
* IF_CS_BIT_COMMAND not used
* IF_CS_BIT_RESP the firmware has a command response for us
* IF_CS_BIT_EVENT the card has a event for use (link lost, snr low etc)
*/
#define IF_CS_CARD_INT_CAUSE 0x00000022
/*
* This is used to for handshaking with the card's bootloader/helper image
* to synchronize downloading of firmware blocks.
*/
#define IF_CS_SQ_READ_LOW 0x00000028
#define IF_CS_SQ_HELPER_OK 0x10
/*
* The scratch register tells us ...
*
* IF_CS_SCRATCH_BOOT_OK the bootloader runs
* IF_CS_SCRATCH_HELPER_OK the helper firmware already runs
*/
#define IF_CS_SCRATCH 0x0000003F
#define IF_CS_SCRATCH_BOOT_OK 0x00
#define IF_CS_SCRATCH_HELPER_OK 0x5a
/*
* Used to detect ancient chips:
*/
#define IF_CS_PRODUCT_ID 0x0000001C
#define IF_CS_CF8385_B1_REV 0x12
#define IF_CS_CF8381_B3_REV 0x04
/*
* Used to detect other cards than CF8385 since their revisions of silicon
* doesn't match those from CF8385, eg. CF8381 B3 works with this driver.
*/
#define CF8381_MANFID 0x02db
#define CF8381_CARDID 0x6064
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
static inline int if_cs_hw_is_cf8381(struct pcmcia_device *p_dev)
{
return (p_dev->manf_id == CF8381_MANFID &&
p_dev->card_id == CF8381_CARDID);
}
static inline int if_cs_hw_is_cf8385(struct pcmcia_device *p_dev)
{
return (p_dev->manf_id == CF8385_MANFID &&
p_dev->card_id == CF8385_CARDID);
}
/********************************************************************/
/* I/O and interrupt handling */
/********************************************************************/
static inline void if_cs_enable_ints(struct if_cs_card *card)
{
lbs_deb_enter(LBS_DEB_CS);
if_cs_write16(card, IF_CS_HOST_INT_MASK, 0);
}
static inline void if_cs_disable_ints(struct if_cs_card *card)
{
lbs_deb_enter(LBS_DEB_CS);
if_cs_write16(card, IF_CS_HOST_INT_MASK, IF_CS_BIT_MASK);
}
/*
* Called from if_cs_host_to_card to send a command to the hardware
*/
static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
{
struct if_cs_card *card = (struct if_cs_card *)priv->card;
int ret = -1;
int loops = 0;
lbs_deb_enter(LBS_DEB_CS);
if_cs_disable_ints(card);
/* Is hardware ready? */
while (1) {
u16 status = if_cs_read16(card, IF_CS_CARD_STATUS);
if (status & IF_CS_BIT_COMMAND)
break;
if (++loops > 100) {
lbs_pr_err("card not ready for commands\n");
goto done;
}
mdelay(1);
}
if_cs_write16(card, IF_CS_CMD_LEN, nb);
if_cs_write16_rep(card, IF_CS_CMD, buf, nb / 2);
/* Are we supposed to transfer an odd amount of bytes? */
if (nb & 1)
if_cs_write8(card, IF_CS_CMD, buf[nb-1]);
/* "Assert the download over interrupt command in the Host
* status register" */
if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
/* "Assert the download over interrupt command in the Card
* interrupt case register" */
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
ret = 0;
done:
if_cs_enable_ints(card);
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
/*
* Called from if_cs_host_to_card to send a data to the hardware
*/
static void if_cs_send_data(struct lbs_private *priv, u8 *buf, u16 nb)
{
struct if_cs_card *card = (struct if_cs_card *)priv->card;
u16 status;
lbs_deb_enter(LBS_DEB_CS);
if_cs_disable_ints(card);
status = if_cs_read16(card, IF_CS_CARD_STATUS);
BUG_ON((status & IF_CS_BIT_TX) == 0);
if_cs_write16(card, IF_CS_WRITE_LEN, nb);
/* write even number of bytes, then odd byte if necessary */
if_cs_write16_rep(card, IF_CS_WRITE, buf, nb / 2);
if (nb & 1)
if_cs_write8(card, IF_CS_WRITE, buf[nb-1]);
if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_TX);
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_TX);
if_cs_enable_ints(card);
lbs_deb_leave(LBS_DEB_CS);
}
/*
* Get the command result out of the card.
*/
static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
{
unsigned long flags;
int ret = -1;
u16 status;
lbs_deb_enter(LBS_DEB_CS);
/* is hardware ready? */
status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
if ((status & IF_CS_BIT_RESP) == 0) {
lbs_pr_err("no cmd response in card\n");
*len = 0;
goto out;
}
*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
goto out;
}
/* read even number of bytes, then odd byte if necessary */
if_cs_read16_rep(priv->card, IF_CS_RESP, data, *len/sizeof(u16));
if (*len & 1)
data[*len-1] = if_cs_read8(priv->card, IF_CS_RESP);
/* This is a workaround for a firmware that reports too much
* bytes */
*len -= 8;
ret = 0;
/* Clear this flag again */
spin_lock_irqsave(&priv->driver_lock, flags);
priv->dnld_sent = DNLD_RES_RECEIVED;
spin_unlock_irqrestore(&priv->driver_lock, flags);
out:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
return ret;
}
static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
{
struct sk_buff *skb = NULL;
u16 len;
u8 *data;
lbs_deb_enter(LBS_DEB_CS);
len = if_cs_read16(priv->card, IF_CS_READ_LEN);
if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
priv->dev->stats.rx_dropped++;
goto dat_err;
}
skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + 2);
if (!skb)
goto out;
skb_put(skb, len);
skb_reserve(skb, 2);/* 16 byte align */
data = skb->data;
/* read even number of bytes, then odd byte if necessary */
if_cs_read16_rep(priv->card, IF_CS_READ, data, len/sizeof(u16));
if (len & 1)
data[len-1] = if_cs_read8(priv->card, IF_CS_READ);
dat_err:
if_cs_write16(priv->card, IF_CS_HOST_STATUS, IF_CS_BIT_RX);
if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_RX);
out:
lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
return skb;
}
static irqreturn_t if_cs_interrupt(int irq, void *data)
{
struct if_cs_card *card = data;
struct lbs_private *priv = card->priv;
u16 cause;
lbs_deb_enter(LBS_DEB_CS);
/* Ask card interrupt cause register if there is something for us */
cause = if_cs_read16(card, IF_CS_CARD_INT_CAUSE);
lbs_deb_cs("cause 0x%04x\n", cause);
if (cause == 0) {
/* Not for us */
return IRQ_NONE;
}
if (cause == 0xffff) {
/* Read in junk, the card has probably been removed */
card->priv->surpriseremoved = 1;
return IRQ_HANDLED;
}
if (cause & IF_CS_BIT_RX) {
struct sk_buff *skb;
lbs_deb_cs("rx packet\n");
skb = if_cs_receive_data(priv);
if (skb)
lbs_process_rxed_packet(priv, skb);
}
if (cause & IF_CS_BIT_TX) {
lbs_deb_cs("tx done\n");
lbs_host_to_card_done(priv);
}
if (cause & IF_CS_BIT_RESP) {
unsigned long flags;
u8 i;
lbs_deb_cs("cmd resp\n");
spin_lock_irqsave(&priv->driver_lock, flags);
i = (priv->resp_idx == 0) ? 1 : 0;
spin_unlock_irqrestore(&priv->driver_lock, flags);
BUG_ON(priv->resp_len[i]);
if_cs_receive_cmdres(priv, priv->resp_buf[i],
&priv->resp_len[i]);
spin_lock_irqsave(&priv->driver_lock, flags);
lbs_notify_command_response(priv, i);
spin_unlock_irqrestore(&priv->driver_lock, flags);
}
if (cause & IF_CS_BIT_EVENT) {
u16 status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE,
IF_CS_BIT_EVENT);
lbs_queue_event(priv, (status & IF_CS_CARD_STATUS_MASK) >> 8);
}
/* Clear interrupt cause */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, cause & IF_CS_BIT_MASK);
lbs_deb_leave(LBS_DEB_CS);
return IRQ_HANDLED;
}
/********************************************************************/
/* Firmware */
/********************************************************************/
/*
* Tries to program the helper firmware.
*
* Return 0 on success
*/
static int if_cs_prog_helper(struct if_cs_card *card)
{
int ret = 0;
int sent = 0;
u8 scratch;
const struct firmware *fw;
lbs_deb_enter(LBS_DEB_CS);
scratch = if_cs_read8(card, IF_CS_SCRATCH);
/* "If the value is 0x5a, the firmware is already
* downloaded successfully"
*/
if (scratch == IF_CS_SCRATCH_HELPER_OK)
goto done;
/* "If the value is != 00, it is invalid value of register */
if (scratch != IF_CS_SCRATCH_BOOT_OK) {
ret = -ENODEV;
goto done;
}
/* TODO: make firmware file configurable */
ret = request_firmware(&fw, "libertas_cs_helper.fw",
&handle_to_dev(card->p_dev));
if (ret) {
lbs_pr_err("can't load helper firmware\n");
ret = -ENODEV;
goto done;
}
lbs_deb_cs("helper size %td\n", fw->size);
/* "Set the 5 bytes of the helper image to 0" */
/* Not needed, this contains an ARM branch instruction */
for (;;) {
/* "the number of bytes to send is 256" */
int count = 256;
int remain = fw->size - sent;
if (remain < count)
count = remain;
/* "write the number of bytes to be sent to the I/O Command
* write length register" */
if_cs_write16(card, IF_CS_CMD_LEN, count);
/* "write this to I/O Command port register as 16 bit writes */
if (count)
if_cs_write16_rep(card, IF_CS_CMD,
&fw->data[sent],
count >> 1);
/* "Assert the download over interrupt command in the Host
* status register" */
if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
/* "Assert the download over interrupt command in the Card
* interrupt case register" */
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
/* "The host polls the Card Status register ... for 50 ms before
declaring a failure */
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
lbs_pr_err("can't download helper at 0x%x, ret %d\n",
sent, ret);
goto err_release;
}
if (count == 0)
break;
sent += count;
}
err_release:
release_firmware(fw);
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
static int if_cs_prog_real(struct if_cs_card *card)
{
const struct firmware *fw;
int ret = 0;
int retry = 0;
int len = 0;
int sent;
lbs_deb_enter(LBS_DEB_CS);
/* TODO: make firmware file configurable */
ret = request_firmware(&fw, "libertas_cs.fw",
&handle_to_dev(card->p_dev));
if (ret) {
lbs_pr_err("can't load firmware\n");
ret = -ENODEV;
goto done;
}
lbs_deb_cs("fw size %td\n", fw->size);
ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
IF_CS_SQ_HELPER_OK);
if (ret < 0) {
lbs_pr_err("helper firmware doesn't answer\n");
goto err_release;
}
for (sent = 0; sent < fw->size; sent += len) {
len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
if (len & 1) {
retry++;
lbs_pr_info("odd, need to retry this firmware block\n");
} else {
retry = 0;
}
if (retry > 20) {
lbs_pr_err("could not download firmware\n");
ret = -ENODEV;
goto err_release;
}
if (retry) {
sent -= len;
}
if_cs_write16(card, IF_CS_CMD_LEN, len);
if_cs_write16_rep(card, IF_CS_CMD,
&fw->data[sent],
(len+1) >> 1);
if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
lbs_pr_err("can't download firmware at 0x%x\n", sent);
goto err_release;
}
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
if (ret < 0)
lbs_pr_err("firmware download failed\n");
err_release:
release_firmware(fw);
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
/********************************************************************/
/* Callback functions for libertas.ko */
/********************************************************************/
/* Send commands or data packets to the card */
static int if_cs_host_to_card(struct lbs_private *priv,
u8 type,
u8 *buf,
u16 nb)
{
int ret = -1;
lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);
switch (type) {
case MVMS_DAT:
priv->dnld_sent = DNLD_DATA_SENT;
if_cs_send_data(priv, buf, nb);
ret = 0;
break;
case MVMS_CMD:
priv->dnld_sent = DNLD_CMD_SENT;
ret = if_cs_send_cmd(priv, buf, nb);
break;
default:
lbs_pr_err("%s: unsupported type %d\n", __func__, type);
}
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
/********************************************************************/
/* Card Services */
/********************************************************************/
/*
* After a card is removed, if_cs_release() will unregister the
* device, and release the PCMCIA configuration. If the device is
* still open, this will be postponed until it is closed.
*/
static void if_cs_release(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
lbs_deb_enter(LBS_DEB_CS);
free_irq(p_dev->irq.AssignedIRQ, card);
pcmcia_disable_device(p_dev);
if (card->iobase)
ioport_unmap(card->iobase);
lbs_deb_leave(LBS_DEB_CS);
}
/*
* This creates an "instance" of the driver, allocating local data
* structures for one device. The device is registered with Card
* Services.
*
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event.
*/
static int if_cs_probe(struct pcmcia_device *p_dev)
{
int ret = -ENOMEM;
unsigned int prod_id;
struct lbs_private *priv;
struct if_cs_card *card;
/* CIS parsing */
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_io_t *io = &cfg->io;
u_char buf[64];
lbs_deb_enter(LBS_DEB_CS);
card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
if (!card) {
lbs_pr_err("error in kzalloc\n");
goto out;
}
card->p_dev = p_dev;
p_dev->priv = card;
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = NULL;
p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
p_dev->conf.Attributes = 0;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
(ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
(ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
{
lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
goto out1;
}
p_dev->conf.ConfigIndex = cfg->index;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1) {
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
}
/* IO window settings */
if (cfg->io.nwin != 1) {
lbs_pr_err("wrong CIS (check number of IO windows)\n");
ret = -ENODEV;
goto out1;
}
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
/* This reserves IO space but doesn't actually enable it */
ret = pcmcia_request_io(p_dev, &p_dev->io);
if (ret) {
lbs_pr_err("error in pcmcia_request_io\n");
goto out1;
}
/*
* Allocate an interrupt line. Note that this does not assign
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(p_dev, &p_dev->irq);
if (ret) {
lbs_pr_err("error in pcmcia_request_irq\n");
goto out1;
}
}
/* Initialize io access */
card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
if (!card->iobase) {
lbs_pr_err("error in ioport_map\n");
ret = -EIO;
goto out1;
}
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
if (ret) {
lbs_pr_err("error in pcmcia_request_configuration\n");
goto out2;
}
/* Finally, report what we've done */
lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
/* Check if we have a current silicon */
prod_id = if_cs_read8(card, IF_CS_PRODUCT_ID);
if (if_cs_hw_is_cf8381(p_dev) && prod_id < IF_CS_CF8381_B3_REV) {
lbs_pr_err("old chips like 8381 rev B3 aren't supported\n");
ret = -ENODEV;
goto out2;
}
if (if_cs_hw_is_cf8385(p_dev) && prod_id < IF_CS_CF8385_B1_REV) {
lbs_pr_err("old chips like 8385 rev B1 aren't supported\n");
ret = -ENODEV;
goto out2;
}
/* Load the firmware early, before calling into libertas.ko */
ret = if_cs_prog_helper(card);
if (ret == 0)
ret = if_cs_prog_real(card);
if (ret)
goto out2;
/* Make this card known to the libertas driver */
priv = lbs_add_card(card, &p_dev->dev);
if (!priv) {
ret = -ENOMEM;
goto out2;
}
/* Finish setting up fields in lbs_private */
card->priv = priv;
priv->card = card;
priv->hw_host_to_card = if_cs_host_to_card;
priv->fw_ready = 1;
/* Now actually get the IRQ */
ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
lbs_pr_err("error in request_irq\n");
goto out3;
}
/* Clear any interrupt cause that happend while sending
* firmware/initializing card */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
if_cs_enable_ints(card);
/* And finally bring the card up */
if (lbs_start_card(priv) != 0) {
lbs_pr_err("could not activate card\n");
goto out3;
}
/* The firmware for the CF card supports powersave */
priv->ps_supported = 1;
ret = 0;
goto out;
out3:
lbs_remove_card(priv);
out2:
ioport_unmap(card->iobase);
out1:
pcmcia_disable_device(p_dev);
out:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
/*
* This deletes a driver "instance". The device is de-registered with
* Card Services. If it has been released, all local data structures
* are freed. Otherwise, the structures will be freed when the device
* is released.
*/
static void if_cs_detach(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
lbs_deb_enter(LBS_DEB_CS);
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
if_cs_disable_ints(card);
if_cs_release(p_dev);
kfree(card);
lbs_deb_leave(LBS_DEB_CS);
}
/********************************************************************/
/* Module initialization */
/********************************************************************/
static struct pcmcia_device_id if_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(CF8381_MANFID, CF8381_CARDID),
PCMCIA_DEVICE_MANF_CARD(CF8385_MANFID, CF8385_CARDID),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
static struct pcmcia_driver lbs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = DRV_NAME,
},
.probe = if_cs_probe,
.remove = if_cs_detach,
.id_table = if_cs_ids,
};
static int __init if_cs_init(void)
{
int ret;
lbs_deb_enter(LBS_DEB_CS);
ret = pcmcia_register_driver(&lbs_driver);
lbs_deb_leave(LBS_DEB_CS);
return ret;
}
static void __exit if_cs_exit(void)
{
lbs_deb_enter(LBS_DEB_CS);
pcmcia_unregister_driver(&lbs_driver);
lbs_deb_leave(LBS_DEB_CS);
}
module_init(if_cs_init);
module_exit(if_cs_exit);
Reference in New Issue View Git Blame Copy Permalink