linux/drivers/usb/host/xhci-hub.c

309 lines
9.1 KiB
C

/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/unaligned.h>
#include "xhci.h"
static void xhci_hub_descriptor(struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
int ports;
u16 temp;
ports = HCS_MAX_PORTS(xhci->hcs_params1);
/* USB 3.0 hubs have a different descriptor, but we fake this for now */
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
temp = 1 + (ports / 8);
desc->bDescLength = 7 + 2 * temp;
/* Why does core/hcd.h define bitmap? It's just confusing. */
memset(&desc->DeviceRemovable[0], 0, temp);
memset(&desc->DeviceRemovable[temp], 0xff, temp);
/* Ugh, these should be #defines, FIXME */
/* Using table 11-13 in USB 2.0 spec. */
temp = 0;
/* Bits 1:0 - support port power switching, or power always on */
if (HCC_PPC(xhci->hcc_params))
temp |= 0x0001;
else
temp |= 0x0002;
/* Bit 2 - root hubs are not part of a compound device */
/* Bits 4:3 - individual port over current protection */
temp |= 0x0008;
/* Bits 6:5 - no TTs in root ports */
/* Bit 7 - no port indicators */
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
}
static unsigned int xhci_port_speed(unsigned int port_status)
{
if (DEV_LOWSPEED(port_status))
return 1 << USB_PORT_FEAT_LOWSPEED;
if (DEV_HIGHSPEED(port_status))
return 1 << USB_PORT_FEAT_HIGHSPEED;
if (DEV_SUPERSPEED(port_status))
return 1 << USB_PORT_FEAT_SUPERSPEED;
/*
* FIXME: Yes, we should check for full speed, but the core uses that as
* a default in portspeed() in usb/core/hub.c (which is the only place
* USB_PORT_FEAT_*SPEED is used).
*/
return 0;
}
/*
* These bits are Read Only (RO) and should be saved and written to the
* registers: 0, 3, 10:13, 30
* connect status, over-current status, port speed, and device removable.
* connect status and port speed are also sticky - meaning they're in
* the AUX well and they aren't changed by a hot, warm, or cold reset.
*/
#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
/*
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
* bits 5:8, 9, 14:15, 25:27
* link state, port power, port indicator state, "wake on" enable state
*/
#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
/*
* These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
* bit 4 (port reset)
*/
#define XHCI_PORT_RW1S ((1<<4))
/*
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
* bits 1, 17, 18, 19, 20, 21, 22, 23
* port enable/disable, and
* change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
* over-current, reset, link state, and L1 change
*/
#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
/*
* Bit 16 is RW, and writing a '1' to it causes the link state control to be
* latched in
*/
#define XHCI_PORT_RW ((1<<16))
/*
* These bits are Reserved Zero (RsvdZ) and zero should be written to them:
* bits 2, 24, 28:31
*/
#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
/*
* Given a port state, this function returns a value that would result in the
* port being in the same state, if the value was written to the port status
* control register.
* Save Read Only (RO) bits and save read/write bits where
* writing a 0 clears the bit and writing a 1 sets the bit (RWS).
* For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
*/
static u32 xhci_port_state_to_neutral(u32 state)
{
/* Save read-only status and port state */
return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
}
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ports;
unsigned long flags;
u32 temp, status;
int retval = 0;
u32 __iomem *addr;
char *port_change_bit;
ports = HCS_MAX_PORTS(xhci->hcs_params1);
spin_lock_irqsave(&xhci->lock, flags);
switch (typeReq) {
case GetHubStatus:
/* No power source, over-current reported per port */
memset(buf, 0, 4);
break;
case GetHubDescriptor:
xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
status = 0;
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
temp = xhci_readl(xhci, addr);
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
/* wPortChange bits */
if (temp & PORT_CSC)
status |= 1 << USB_PORT_FEAT_C_CONNECTION;
if (temp & PORT_PEC)
status |= 1 << USB_PORT_FEAT_C_ENABLE;
if ((temp & PORT_OCC))
status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
/*
* FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
* changes
*/
if (temp & PORT_CONNECT) {
status |= 1 << USB_PORT_FEAT_CONNECTION;
status |= xhci_port_speed(temp);
}
if (temp & PORT_PE)
status |= 1 << USB_PORT_FEAT_ENABLE;
if (temp & PORT_OC)
status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
if (temp & PORT_RESET)
status |= 1 << USB_PORT_FEAT_RESET;
if (temp & PORT_POWER)
status |= 1 << USB_PORT_FEAT_POWER;
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
case SetPortFeature:
wIndex &= 0xff;
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
temp = xhci_readl(xhci, addr);
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_POWER:
/*
* Turn on ports, even if there isn't per-port switching.
* HC will report connect events even before this is set.
* However, khubd will ignore the roothub events until
* the roothub is registered.
*/
xhci_writel(xhci, temp | PORT_POWER, addr);
temp = xhci_readl(xhci, addr);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
xhci_writel(xhci, temp, addr);
temp = xhci_readl(xhci, addr);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
default:
goto error;
}
temp = xhci_readl(xhci, addr); /* unblock any posted writes */
break;
case ClearPortFeature:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
addr = &xhci->op_regs->port_status_base +
NUM_PORT_REGS*(wIndex & 0xff);
temp = xhci_readl(xhci, addr);
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_C_RESET:
status = PORT_RC;
port_change_bit = "reset";
break;
case USB_PORT_FEAT_C_CONNECTION:
status = PORT_CSC;
port_change_bit = "connect";
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
status = PORT_OCC;
port_change_bit = "over-current";
break;
default:
goto error;
}
/* Change bits are all write 1 to clear */
xhci_writel(xhci, temp | status, addr);
temp = xhci_readl(xhci, addr);
xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
port_change_bit, wIndex, temp);
temp = xhci_readl(xhci, addr); /* unblock any posted writes */
break;
default:
error:
/* "stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
}
/*
* Returns 0 if the status hasn't changed, or the number of bytes in buf.
* Ports are 0-indexed from the HCD point of view,
* and 1-indexed from the USB core pointer of view.
* xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
*
* Note that the status change bits will be cleared as soon as a port status
* change event is generated, so we use the saved status from that event.
*/
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
{
unsigned long flags;
u32 temp, status;
int i, retval;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ports;
u32 __iomem *addr;
ports = HCS_MAX_PORTS(xhci->hcs_params1);
/* Initial status is no changes */
buf[0] = 0;
status = 0;
if (ports > 7) {
buf[1] = 0;
retval = 2;
} else {
retval = 1;
}
spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < ports; i++) {
addr = &xhci->op_regs->port_status_base +
NUM_PORT_REGS*i;
temp = xhci_readl(xhci, addr);
if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
if (i < 7)
buf[0] |= 1 << (i + 1);
else
buf[1] |= 1 << (i - 7);
status = 1;
}
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;
}