f536b3cae8
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
77 lines
3.0 KiB
Makefile
77 lines
3.0 KiB
Makefile
#
|
|
# Makefile for the kernel pcmcia subsystem (c/o David Hinds)
|
|
#
|
|
|
|
pcmcia_core-y += cs.o socket_sysfs.o
|
|
pcmcia_core-$(CONFIG_CARDBUS) += cardbus.o
|
|
obj-$(CONFIG_PCCARD) += pcmcia_core.o
|
|
|
|
pcmcia-y += ds.o pcmcia_resource.o cistpl.o pcmcia_cis.o
|
|
obj-$(CONFIG_PCMCIA) += pcmcia.o
|
|
|
|
pcmcia_rsrc-y += rsrc_mgr.o
|
|
pcmcia_rsrc-$(CONFIG_PCCARD_NONSTATIC) += rsrc_nonstatic.o
|
|
pcmcia_rsrc-$(CONFIG_PCCARD_IODYN) += rsrc_iodyn.o
|
|
obj-$(CONFIG_PCCARD) += pcmcia_rsrc.o
|
|
|
|
|
|
# socket drivers
|
|
|
|
obj-$(CONFIG_YENTA) += yenta_socket.o
|
|
|
|
obj-$(CONFIG_PD6729) += pd6729.o
|
|
obj-$(CONFIG_I82365) += i82365.o
|
|
obj-$(CONFIG_I82092) += i82092.o
|
|
obj-$(CONFIG_TCIC) += tcic.o
|
|
obj-$(CONFIG_PCMCIA_SOC_COMMON) += soc_common.o
|
|
obj-$(CONFIG_PCMCIA_SA11XX_BASE) += sa11xx_base.o
|
|
obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
|
|
obj-$(CONFIG_PCMCIA_SA1111) += sa1111_cs.o
|
|
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
|
|
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
|
|
obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
|
|
obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
|
|
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
|
|
obj-$(CONFIG_OMAP_CF) += omap_cf.o
|
|
obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o
|
|
obj-$(CONFIG_AT91_CF) += at91_cf.o
|
|
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
|
|
obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
|
|
|
|
sa1111_cs-y += sa1111_generic.o
|
|
sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1111_neponset.o
|
|
sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1111_badge4.o
|
|
sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1111_jornada720.o
|
|
sa1111_cs-$(CONFIG_ARCH_LUBBOCK) += sa1111_lubbock.o
|
|
|
|
sa1100_cs-y += sa1100_generic.o
|
|
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
|
|
sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o
|
|
sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
|
|
sa1100_cs-$(CONFIG_SA1100_H3100) += sa1100_h3600.o
|
|
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
|
|
sa1100_cs-$(CONFIG_SA1100_NANOENGINE) += sa1100_nanoengine.o
|
|
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
|
|
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
|
|
|
|
pxa2xx_cm_x2xx_cs-y += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
|
|
pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
|
|
pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
|
|
pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o
|
|
pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o
|
|
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
|
|
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
|
|
pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
|
|
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
|
|
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
|
|
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
|
|
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
|
|
pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
|
|
pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
|
|
pxa2xx-obj-$(CONFIG_MACH_COLIBRI320) += pxa2xx_colibri.o
|
|
pxa2xx-obj-$(CONFIG_MACH_H4700) += pxa2xx_hx4700.o
|
|
|
|
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
|
|
|
|
obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o
|