linux/drivers/dma/Kconfig

562 lines
15 KiB
Plaintext

#
# DMA engine configuration
#
menuconfig DMADEVICES
bool "DMA Engine support"
depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
used to offload memory copies in the network stack and
RAID operations in the MD driver. This menu only presents
DMA Device drivers supported by the configured arch, it may
be empty in some cases.
config DMADEVICES_DEBUG
bool "DMA Engine debugging"
depends on DMADEVICES != n
help
This is an option for use by developers; most people should
say N here. This enables DMA engine core and driver debugging.
config DMADEVICES_VDEBUG
bool "DMA Engine verbose debugging"
depends on DMADEVICES_DEBUG != n
help
This is an option for use by developers; most people should
say N here. This enables deeper (more verbose) debugging of
the DMA engine core and drivers.
if DMADEVICES
comment "DMA Devices"
#core
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
bool
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
bool
config DMA_ENGINE
bool
config DMA_VIRTUAL_CHANNELS
tristate
config DMA_ACPI
def_bool y
depends on ACPI
config DMA_OF
def_bool y
depends on OF
select DMA_ENGINE
#devices
config AMBA_PL08X
bool "ARM PrimeCell PL080 or PL081 support"
depends on ARM_AMBA
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Platform has a PL08x DMAC device
which can provide DMA engine support
config AMCC_PPC440SPE_ADMA
tristate "AMCC PPC440SPe ADMA support"
depends on 440SPe || 440SP
select DMA_ENGINE
select DMA_ENGINE_RAID
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the AMCC PPC440SPe RAID engines.
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
select DMA_ENGINE
help
Support the Atmel AHB DMA controller.
config AT_XDMAC
tristate "Atmel XDMA support"
depends on ARCH_AT91
select DMA_ENGINE
help
Support the Atmel XDMA controller.
config AXI_DMAC
tristate "Analog Devices AXI-DMAC DMA support"
depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_SOCFPGA || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
controller is often used in Analog Device's reference designs for FPGA
platforms.
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
depends on ARCH_U300
help
Enable support for ST-Ericsson COH 901 318 DMA.
config DMA_BCM2835
tristate "BCM2835 DMA engine support"
depends on ARCH_BCM2835
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config DMA_JZ4740
tristate "JZ4740 DMA support"
depends on MACH_JZ4740
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config DMA_JZ4780
tristate "JZ4780 DMA support"
depends on MACH_JZ4780
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
This selects support for the DMA controller in Ingenic JZ4780 SoCs.
If you have a board based on such a SoC and wish to use DMA for
devices which can use the DMA controller, say Y or M here.
config DMA_OMAP
tristate "OMAP DMA support"
depends on ARCH_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
select TI_DMA_CROSSBAR if SOC_DRA7XX
config DMA_SA11X0
tristate "SA-11x0 DMA support"
depends on ARCH_SA1100
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine found on Intel StrongARM SA-1100 and
SA-1110 SoCs. This DMA engine can only be used with on-chip
devices.
config DMA_SUN4I
tristate "Allwinner A10 DMA SoCs support"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
select DMA_ENGINE
select DMA_OF
select DMA_VIRTUAL_CHANNELS
help
Enable support for the DMA controller present in the sun4i,
sun5i and sun7i Allwinner ARM SoCs.
config DMA_SUN6I
tristate "Allwinner A31 SoCs DMA support"
depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
depends on RESET_CONTROLLER
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support for the DMA engine first found in Allwinner A31 SoCs.
config EP93XX_DMA
bool "Cirrus Logic EP93xx DMA support"
depends on ARCH_EP93XX
select DMA_ENGINE
help
Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
config FSL_DMA
tristate "Freescale Elo series DMA support"
depends on FSL_SOC
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Freescale Elo series DMA controllers.
The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
some Txxx and Bxxx parts.
config FSL_EDMA
tristate "Freescale eDMA engine support"
depends on OF
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the Freescale eDMA engine with programmable channel
multiplexing capability for DMA request sources(slot).
This module can be found on Freescale Vybrid and LS-1 SoCs.
config FSL_RAID
tristate "Freescale RAID engine Support"
depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
select DMA_ENGINE
select DMA_ENGINE_RAID
---help---
Enable support for Freescale RAID Engine. RAID Engine is
available on some QorIQ SoCs (like P5020/P5040). It has
the capability to offload memcpy, xor and pq computation
for raid5/6.
config IMG_MDC_DMA
tristate "IMG MDC support"
depends on MIPS || COMPILE_TEST
depends on MFD_SYSCON
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Enable support for the IMG multi-threaded DMA controller (MDC).
config IMX_DMA
tristate "i.MX DMA support"
depends on ARCH_MXC
select DMA_ENGINE
help
Support the i.MX DMA engine. This engine is integrated into
Freescale i.MX1/21/27 chips.
config IMX_SDMA
tristate "i.MX SDMA support"
depends on ARCH_MXC
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into
Freescale i.MX25/31/35/51/53/6 chips.
config INTEL_IDMA64
tristate "Intel integrated DMA 64-bit support"
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Enable DMA support for Intel Low Power Subsystem such as found on
Intel Skylake PCH.
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86_64
select DMA_ENGINE
select DMA_ENGINE_RAID
select DCA
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the Intel(R) IOP Series RAID engines.
config INTEL_MIC_X100_DMA
tristate "Intel MIC X100 DMA Driver"
depends on 64BIT && X86 && INTEL_MIC_BUS
select DMA_ENGINE
help
This enables DMA support for the Intel Many Integrated Core
(MIC) family of PCIe form factor coprocessor X100 devices that
run a 64 bit Linux OS. This driver will be used by both MIC
host and card drivers.
If you are building host kernel with a MIC device or a card
kernel for a MIC device, then say M (recommended) or Y, else
say N. If unsure say N.
More information about the Intel MIC family as well as the Linux
OS and tools for MIC to use with this driver are available from
<http://software.intel.com/en-us/mic-developer>.
config K3_DMA
tristate "Hisilicon K3 DMA support"
depends on ARCH_HI3xxx
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine for Hisilicon K3 platform
devices.
config LPC18XX_DMAMUX
bool "NXP LPC18xx/43xx DMA MUX for PL080"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on OF && AMBA_PL08X
select MFD_SYSCON
help
Enable support for DMA on NXP LPC18xx/43xx platforms
with PL080 and multiplexed DMA request lines.
config MMP_PDMA
bool "MMP PDMA support"
depends on (ARCH_MMP || ARCH_PXA)
select DMA_ENGINE
help
Support the MMP PDMA engine for PXA and MMP platform.
config MMP_TDMA
bool "MMP Two-Channel DMA support"
depends on ARCH_MMP
select DMA_ENGINE
select MMP_SRAM
help
Support the MMP Two-Channel DMA engine.
This engine used for MMP Audio DMA and pxa910 SQU.
It needs sram driver under mach-mmp.
config MOXART_DMA
tristate "MOXART DMA support"
depends on ARCH_MOXART
select DMA_ENGINE
select DMA_OF
select DMA_VIRTUAL_CHANNELS
help
Enable support for the MOXA ART SoC DMA controller.
Say Y here if you enabled MMP ADMA, otherwise say N.
config MPC512X_DMA
tristate "Freescale MPC512x built-in DMA engine support"
depends on PPC_MPC512x || PPC_MPC831x
select DMA_ENGINE
---help---
Enable support for the Freescale MPC512x built-in DMA engine.
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
select DMA_ENGINE
select DMA_ENGINE_RAID
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Marvell XOR engine.
config MXS_DMA
bool "MXS DMA support"
depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q
select STMP_DEVICE
select DMA_ENGINE
help
Support the MXS DMA engine. This engine including APBH-DMA
and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips.
config MX3_IPU
bool "MX3x Image Processing Unit support"
depends on ARCH_MXC
select DMA_ENGINE
default y
help
If you plan to use the Image Processing unit in the i.MX3x, say
Y here. If unsure, select Y.
config MX3_IPU_IRQS
int "Number of dynamically mapped interrupts for IPU"
depends on MX3_IPU
range 2 137
default 4
help
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
To avoid bloating the irq_desc[] array we allocate a sufficient
number of IRQ slots and map them dynamically to specific sources.
config NBPFAXI_DMA
tristate "Renesas Type-AXI NBPF DMA support"
select DMA_ENGINE
depends on ARM || COMPILE_TEST
help
Support for "Type-AXI" NBPF DMA IPs from Renesas
config PCH_DMA
tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
depends on PCI && (X86_32 || COMPILE_TEST)
select DMA_ENGINE
help
Enable support for Intel EG20T PCH DMA engine.
This driver also can be used for LAPIS Semiconductor IOH(Input/
Output Hub), ML7213, ML7223 and ML7831.
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config PL330_DMA
tristate "DMA API Driver for PL330"
select DMA_ENGINE
depends on ARM_AMBA
help
Select if your platform has one or more PL330 DMACs.
You need to provide platform specific settings via
platform_data for a dma-pl330 device.
config PXA_DMA
bool "PXA DMA support"
depends on (ARCH_MMP || ARCH_PXA)
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine for PXA. It is also compatible with MMP PDMA
platform. The internal DMA IP of all PXA variants is supported, with
16 to 32 channels for peripheral to memory or memory to memory
transfers.
config QCOM_BAM_DMA
tristate "QCOM BAM DMA support"
depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
---help---
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
config SIRF_DMA
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
depends on ARCH_SIRF
select DMA_ENGINE
help
Enable support for the CSR SiRFprimaII DMA engine.
config STE_DMA40
bool "ST-Ericsson DMA40 support"
depends on ARCH_U8500
select DMA_ENGINE
help
Support for ST-Ericsson DMA40 controller
config S3C24XX_DMAC
tristate "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support for the Samsung S3C24XX DMA controller driver. The
DMA controller is having multiple DMA channels which can be
configured for different peripherals like audio, UART, SPI.
The DMA controller can transfer data from memory to peripheral,
periphal to memory, periphal to periphal and memory to memory.
config TXX9_DMAC
tristate "Toshiba TXx9 SoC DMA support"
depends on MACH_TX49XX || MACH_TX39XX
select DMA_ENGINE
help
Support the TXx9 SoC internal DMA controller. This can be
integrated in chips such as the Toshiba TX4927/38/39.
config TEGRA20_APB_DMA
bool "NVIDIA Tegra20 APB DMA support"
depends on ARCH_TEGRA
select DMA_ENGINE
help
Support for the NVIDIA Tegra20 APB DMA controller driver. The
DMA controller is having multiple DMA channel which can be
configured for different peripherals like audio, UART, SPI,
I2C etc which is in APB bus.
This DMA controller transfers data from memory to peripheral fifo
or vice versa. It does not support memory to memory data transfer.
config TIMB_DMA
tristate "Timberdale FPGA DMA support"
depends on MFD_TIMBERDALE
select DMA_ENGINE
help
Enable support for the Timberdale FPGA DMA engine.
config TI_CPPI41
tristate "AM33xx CPPI41 DMA support"
depends on ARCH_OMAP
select DMA_ENGINE
help
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
is currently used by the USB driver on AM335x platforms.
config TI_DMA_CROSSBAR
bool
config TI_EDMA
bool "TI EDMA support"
depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
select TI_DMA_CROSSBAR if ARCH_OMAP
default n
help
Enable support for the TI EDMA controller. This DMA
engine is found on TI DaVinci and AM33xx parts.
config XGENE_DMA
tristate "APM X-Gene DMA support"
depends on ARCH_XGENE || COMPILE_TEST
select DMA_ENGINE
select DMA_ENGINE_RAID
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the APM X-Gene SoC DMA engine.
config XILINX_VDMA
tristate "Xilinx AXI VDMA Engine"
depends on (ARCH_ZYNQ || MICROBLAZE)
select DMA_ENGINE
help
Enable support for Xilinx AXI VDMA Soft IP.
This engine provides high-bandwidth direct memory access
between memory and AXI4-Stream video type target
peripherals including peripherals which support AXI4-
Stream Video Protocol. It has two stream interfaces/
channels, Memory Mapped to Stream (MM2S) and Stream to
Memory Mapped (S2MM) for the data transfers.
config ZX_DMA
tristate "ZTE ZX296702 DMA support"
depends on ARCH_ZX
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine for ZTE ZX296702 platform devices.
# driver files
source "drivers/dma/bestcomm/Kconfig"
source "drivers/dma/dw/Kconfig"
source "drivers/dma/hsu/Kconfig"
source "drivers/dma/sh/Kconfig"
# clients
comment "DMA Clients"
depends on DMA_ENGINE
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
depends on DMA_ENGINE
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
a dma engine that can perform raid operations and you have enabled
MD_RAID456 say Y.
If unsure, say N.
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
config DMA_ENGINE_RAID
bool
endif