497 lines
14 KiB
C
497 lines
14 KiB
C
/*******************************************************************************
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
|
Copyright(c) 1999 - 2008 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include "ixgbe_common.h"
|
|
#include "ixgbe_phy.h"
|
|
|
|
static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
|
|
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
|
|
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
|
|
|
|
/**
|
|
* ixgbe_identify_phy_generic - Get physical layer module
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines the physical layer module found on the current adapter.
|
|
**/
|
|
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u32 phy_addr;
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
|
|
if (ixgbe_validate_phy_addr(hw, phy_addr)) {
|
|
hw->phy.addr = phy_addr;
|
|
ixgbe_get_phy_id(hw);
|
|
hw->phy.type =
|
|
ixgbe_get_phy_type_from_id(hw->phy.id);
|
|
status = 0;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
status = 0;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_validate_phy_addr - Determines phy address is valid
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
|
|
{
|
|
u16 phy_id = 0;
|
|
bool valid = false;
|
|
|
|
hw->phy.addr = phy_addr;
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
|
|
|
|
if (phy_id != 0xFFFF && phy_id != 0x0)
|
|
valid = true;
|
|
|
|
return valid;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_id - Get the phy type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
|
|
{
|
|
u32 status;
|
|
u16 phy_id_high = 0;
|
|
u16 phy_id_low = 0;
|
|
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_high);
|
|
|
|
if (status == 0) {
|
|
hw->phy.id = (u32)(phy_id_high << 16);
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_low);
|
|
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
|
|
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_type_from_id - Get the phy type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
|
|
{
|
|
enum ixgbe_phy_type phy_type;
|
|
|
|
switch (phy_id) {
|
|
case TN1010_PHY_ID:
|
|
phy_type = ixgbe_phy_tn;
|
|
break;
|
|
case QT2022_PHY_ID:
|
|
phy_type = ixgbe_phy_qt;
|
|
break;
|
|
default:
|
|
phy_type = ixgbe_phy_unknown;
|
|
break;
|
|
}
|
|
|
|
return phy_type;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy_generic - Performs a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
/*
|
|
* Perform soft PHY reset to the PHY_XS.
|
|
* This will cause a soft reset to the PHY
|
|
*/
|
|
return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
IXGBE_MDIO_PHY_XS_RESET);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @phy_data: Pointer to read data from PHY register
|
|
**/
|
|
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 *phy_data)
|
|
{
|
|
u32 command;
|
|
u32 i;
|
|
u32 data;
|
|
s32 status = 0;
|
|
u16 gssr;
|
|
|
|
if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
|
|
gssr = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
gssr = IXGBE_GSSR_PHY0_SM;
|
|
|
|
if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
|
|
status = IXGBE_ERR_SWFW_SYNC;
|
|
|
|
if (status == 0) {
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address command did not complete.\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
if (status == 0) {
|
|
/*
|
|
* Address cycle complete, setup and write the read
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY read command didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
} else {
|
|
/*
|
|
* Read operation is complete. Get the data
|
|
* from MSRWD
|
|
*/
|
|
data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
|
|
data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
|
|
*phy_data = (u16)(data);
|
|
}
|
|
}
|
|
|
|
ixgbe_release_swfw_sync(hw, gssr);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Data to write to the PHY register
|
|
**/
|
|
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 phy_data)
|
|
{
|
|
u32 command;
|
|
u32 i;
|
|
s32 status = 0;
|
|
u16 gssr;
|
|
|
|
if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
|
|
gssr = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
gssr = IXGBE_GSSR_PHY0_SM;
|
|
|
|
if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
|
|
status = IXGBE_ERR_SWFW_SYNC;
|
|
|
|
if (status == 0) {
|
|
/* Put the data in the MDI single read and write data register*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
|
|
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address cmd didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
if (status == 0) {
|
|
/*
|
|
* Address cycle complete, setup and write the write
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
udelay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
hw_dbg(hw, "PHY address cmd didn't complete\n");
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
}
|
|
|
|
ixgbe_release_swfw_sync(hw, gssr);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_generic - Set and restart autoneg
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Restart autonegotiation and PHY and waits for completion.
|
|
**/
|
|
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_NOT_IMPLEMENTED;
|
|
u32 time_out;
|
|
u32 max_time_out = 10;
|
|
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
|
|
|
|
/*
|
|
* Set advertisement settings in PHY based on autoneg_advertised
|
|
* settings. If autoneg_advertised = 0, then advertise default values
|
|
* tnx devices cannot be "forced" to a autoneg 10G and fail. But can
|
|
* for a 1G.
|
|
*/
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
|
|
|
|
if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
|
|
autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
|
|
else
|
|
autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
|
|
|
|
/* Restart PHY autonegotiation and wait for completion */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
|
|
|
|
autoneg_reg |= IXGBE_MII_RESTART;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
|
|
|
|
/* Wait for autonegotiation to finish */
|
|
for (time_out = 0; time_out < max_time_out; time_out++) {
|
|
udelay(10);
|
|
/* Restart PHY autonegotiation and wait for completion */
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
|
|
if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
|
|
status = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (time_out == max_time_out)
|
|
status = IXGBE_ERR_LINK_SETUP;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg: true if autonegotiation enabled
|
|
**/
|
|
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
|
|
/*
|
|
* Clear autoneg_advertised and set new values based on input link
|
|
* speed.
|
|
*/
|
|
hw->phy.autoneg_advertised = 0;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
|
|
/* Setup link based on the new speed settings */
|
|
hw->phy.ops.setup_link(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_phy_link_tnx - Determine link and speed status
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Reads the VS1 register to determine if link is up and the current speed for
|
|
* the PHY.
|
|
**/
|
|
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *link_up)
|
|
{
|
|
s32 status = 0;
|
|
u32 time_out;
|
|
u32 max_time_out = 10;
|
|
u16 phy_link = 0;
|
|
u16 phy_speed = 0;
|
|
u16 phy_data = 0;
|
|
|
|
/* Initialize speed and link to default case */
|
|
*link_up = false;
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
/*
|
|
* Check current speed and link status of the PHY register.
|
|
* This is a vendor specific register and may have to
|
|
* be changed for other copper PHYs.
|
|
*/
|
|
for (time_out = 0; time_out < max_time_out; time_out++) {
|
|
udelay(10);
|
|
status = hw->phy.ops.read_reg(hw,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
&phy_data);
|
|
phy_link = phy_data &
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
|
|
phy_speed = phy_data &
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
|
|
if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
|
|
*link_up = true;
|
|
if (phy_speed ==
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
|
|
* @hw: pointer to hardware structure
|
|
* @firmware_version: pointer to the PHY Firmware Version
|
|
**/
|
|
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
|
u16 *firmware_version)
|
|
{
|
|
s32 status = 0;
|
|
|
|
status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
firmware_version);
|
|
|
|
return status;
|
|
}
|
|
|