linux/drivers/usb
Mark c80b4495c6 USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB-
SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The
US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI
chain to be accessed. Without it only the (single) device with SCSI ID 0
can be used.

The standalone converter sold by Entrega had model number U1-SC25. Xircom
acquired Entrega and re-branded the product line PortGear. The PortGear USB
to SCSI Converter (model PGSCSI) is internally identical to the Entrega
product, but later models may use a different USB ID. The Entrega-branded
units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and
Macintosh drivers also support 085A:0028.

Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac
(8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as
a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may
have initially used the same ID as the standalone U1-SC25 (1645:0007), but
later production used 085A:0026.

My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133
probably also exist.

This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows
driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I
couldn't find any mention of that actually existing in the wild; perhaps it
was cancelled before release?

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 15:01:38 -07:00
..
atm
c67x00
chipidea usb: chipidea: msm: Initialize PHY on reset event 2014-09-10 17:30:39 -07:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common
core usb: hub: take hub->hdev reference when processing from eventlist 2014-09-10 13:32:35 -07:00
dwc2 usb: dwc2/gadget: avoid disabling ep0 2014-09-09 10:17:48 -07:00
dwc3 usb: dwc3: fix TRB completion when multiple TRBs are started 2014-09-05 09:16:55 -05:00
early
gadget usb: gadget: f_fs: fix the redundant ep files problem 2014-09-03 09:15:59 -05:00
host USB: EHCI: unlink QHs even after the controller has stopped 2014-09-19 14:59:17 -07:00
image
misc USB: sisusb: add device id for Magic Control USB video 2014-08-26 12:07:46 -07:00
mon
musb usb: musb: cppi41: fix not transmitting zero length packet issue 2014-09-03 09:15:56 -05:00
phy usb: phy: tegra: Avoid use of sizeof(void) 2014-09-03 09:16:01 -05:00
renesas_usbhs usb: renesas_usbhs: fix the usb_pkt_pop() 2014-09-03 09:15:58 -05:00
serial USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device 2014-09-08 16:01:59 -07:00
storage USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters 2014-09-19 15:01:38 -07:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: wusbcore: fix below build warning 2014-08-19 11:28:53 -05:00
Kconfig usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.