OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/net/dsa
History
Andrew Lunn 7cbbee050c net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports 
By default, the switch driver is expected to configure CPU and DSA
ports to their maximum speed. For the 6341 and 6390 families, the
ports interface mode has to be configured as well. The 6390X range
support 10G ports using XAUI, while the 6341 and 6390 supports
2500BaseX, as their maximum speed.

Fixes: 787799a9d5 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 		2019-03-08 22:55:28 -08:00
..
b53 dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00
microchip net: dsa: microchip: add KSZ9893 switch support 2019-03-03 13:48:49 -08:00
mv88e6xxx net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports 2019-03-08 22:55:28 -08:00
Kconfig net: dsa: lantiq_gswip: Depend on HAS_IOMEM 2018-09-25 20:27:43 -07:00
Makefile net: dsa: Add Lantiq / Intel DSA driver for vrx200 2018-09-13 08:14:33 -07:00
bcm_sf2.c dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00
bcm_sf2.h net: dsa: bcm_sf2: Add support for CFP statistics 2019-02-08 22:11:07 -08:00
bcm_sf2_cfp.c net: dsa: bcm_sf2: Remove set but not used variables 'v6_spec, v6_m_spec' 2019-02-17 15:31:47 -08:00
bcm_sf2_regs.h net: dsa: bcm_sf2: Add support for CFP statistics 2019-02-08 22:11:07 -08:00
dsa_loop.c net: phy: fixed-phy: Drop GPIO from fixed_phy_add() 2019-02-04 18:33:36 -08:00
dsa_loop.h
…
dsa_loop_bdinfo.c
…
lan9303-core.c dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00
lan9303.h
…
lan9303_i2c.c net: dsa: lan9303: Adjust indenting 2017-11-08 13:29:06 +09:00
lan9303_mdio.c net: dsa: lan9303: Adjust indenting 2017-11-08 13:29:06 +09:00
lantiq_gswip.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-02 12:54:35 -08:00
lantiq_pce.h net: dsa: Add Lantiq / Intel DSA driver for vrx200 2018-09-13 08:14:33 -07:00
mt7530.c drivers: net: Remove unnecessary semicolon 2019-03-01 23:13:49 -08:00
mt7530.h net: dsa: mt7530: support the 7530 switch on the Mediatek MT7621 SoC 2019-01-30 14:26:07 -08:00
mv88e6060.c mv88e6060: disable hardware level MAC learning 2018-12-03 16:04:21 -08:00
mv88e6060.h
…
qca8k.c dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00
qca8k.h net: dsa: qca8k: Enable delay for RGMII_ID mode 2019-02-19 13:19:14 -08:00
realtek-smi.c net: dsa: realtek-smi: fix OF child-node lookup 2019-01-17 14:04:49 -08:00
realtek-smi.h net: dsa: realtek-smi: Add Realtek SMI driver 2018-07-18 13:43:38 +09:00
rtl8366.c dsa: rtl8366: Remove unused variable. 2018-07-18 14:42:18 +09:00
rtl8366rb.c dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00
vitesse-vsc73xx.c dsa: Remove phydev parameter from disable_port call 2019-02-24 22:30:34 -08:00