cd671c16f0
Moderate driver cleanup: convert to platform driver, get rid of board-specific code. Driver loads and runs on a DB1100 board. But since I have no other IrDA hardware to exchange data with I can't say whether it really sends and receives. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2877/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
412 lines
14 KiB
Plaintext
412 lines
14 KiB
Plaintext
menu "Infrared-port device drivers"
|
|
depends on IRDA!=n
|
|
|
|
comment "SIR device drivers"
|
|
|
|
config IRTTY_SIR
|
|
tristate "IrTTY (uses Linux serial driver)"
|
|
depends on IRDA
|
|
help
|
|
Say Y here if you want to build support for the IrTTY line
|
|
discipline. To compile it as a module, choose M here: the module
|
|
will be called irtty-sir. IrTTY makes it possible to use Linux's
|
|
own serial driver for all IrDA ports that are 16550 compatible.
|
|
Most IrDA chips are 16550 compatible so you should probably say Y
|
|
to this option. Using IrTTY will however limit the speed of the
|
|
connection to 115200 bps (IrDA SIR mode).
|
|
|
|
If unsure, say Y.
|
|
|
|
config BFIN_SIR
|
|
tristate "Blackfin SIR on UART"
|
|
depends on BLACKFIN && IRDA
|
|
default n
|
|
help
|
|
Say Y here if your want to enable SIR function on Blackfin UART
|
|
devices.
|
|
|
|
To activate this driver you can start irattach like:
|
|
"irattach irda0 -s"
|
|
|
|
Saying M, it will be built as a module named bfin_sir.
|
|
|
|
Note that you need to turn off one of the serial drivers for SIR
|
|
to use that UART.
|
|
|
|
config BFIN_SIR0
|
|
bool "Blackfin SIR on UART0"
|
|
depends on BFIN_SIR && !SERIAL_BFIN_UART0
|
|
|
|
config BFIN_SIR1
|
|
bool "Blackfin SIR on UART1"
|
|
depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
|
|
|
|
config BFIN_SIR2
|
|
bool "Blackfin SIR on UART2"
|
|
depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
|
|
|
|
config BFIN_SIR3
|
|
bool "Blackfin SIR on UART3"
|
|
depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
|
|
|
|
choice
|
|
prompt "SIR Mode"
|
|
depends on BFIN_SIR
|
|
default SIR_BFIN_DMA
|
|
|
|
config SIR_BFIN_DMA
|
|
bool "DMA mode"
|
|
depends on !DMA_UNCACHED_NONE
|
|
|
|
config SIR_BFIN_PIO
|
|
bool "PIO mode"
|
|
endchoice
|
|
|
|
comment "Dongle support"
|
|
|
|
config SH_SIR
|
|
tristate "SuperH SIR on UART"
|
|
depends on IRDA && SUPERH && \
|
|
(CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
|
|
CPU_SUBTYPE_SH7724)
|
|
default n
|
|
help
|
|
Say Y here if your want to enable SIR function on SuperH UART
|
|
devices.
|
|
|
|
config DONGLE
|
|
bool "Serial dongle support"
|
|
depends on IRTTY_SIR
|
|
help
|
|
Say Y here if you have an infrared device that connects to your
|
|
computer's serial port. These devices are called dongles. Then say Y
|
|
or M to the driver for your particular dongle below.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about serial dongles.
|
|
|
|
config ESI_DONGLE
|
|
tristate "ESI JetEye PC dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Extended Systems
|
|
JetEye PC dongle. To compile it as a module, choose M here. The ESI
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for ESI
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d esi".
|
|
|
|
config ACTISYS_DONGLE
|
|
tristate "ACTiSYS IR-220L and IR220L+ dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-220L and
|
|
IR220L+ dongles. To compile it as a module, choose M here. The
|
|
ACTiSYS dongles attaches to the normal 9-pin serial port connector,
|
|
and can currently only be used by IrTTY. To activate support for
|
|
ACTiSYS dongles you will have to start irattach like this:
|
|
"irattach -d actisys" or "irattach -d actisys+".
|
|
|
|
config TEKRAM_DONGLE
|
|
tristate "Tekram IrMate 210B dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Tekram IrMate 210B
|
|
dongle. To compile it as a module, choose M here. The Tekram dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Tekram
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d tekram".
|
|
|
|
config TOIM3232_DONGLE
|
|
tristate "TOIM3232 IrDa dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Vishay/Temic
|
|
TOIM3232 and TOIM4232 based dongles.
|
|
To compile it as a module, choose M here.
|
|
|
|
config LITELINK_DONGLE
|
|
tristate "Parallax LiteLink dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Parallax Litelink
|
|
dongle. To compile it as a module, choose M here. The Parallax
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Parallax
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d litelink".
|
|
|
|
config MA600_DONGLE
|
|
tristate "Mobile Action MA600 dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Mobile Action MA600
|
|
dongle. To compile it as a module, choose M here. The MA600 dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. The driver should also support
|
|
the MA620 USB version of the dongle, if the integrated USB-to-RS232
|
|
converter is supported by usbserial. To activate support for
|
|
MA600 dongle you will have to start irattach like this:
|
|
"irattach -d ma600".
|
|
|
|
config GIRBIL_DONGLE
|
|
tristate "Greenwich GIrBIL dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Greenwich GIrBIL
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The Greenwich dongle attaches to the normal 9-pin serial port
|
|
connector, and can currently only be used by IrTTY. To activate
|
|
support for Greenwich dongles you will have to start irattach
|
|
like this: "irattach -d girbil".
|
|
|
|
config MCP2120_DONGLE
|
|
tristate "Microchip MCP2120"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Microchip MCP2120
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The MCP2120 dongle attaches to the normal 9-pin serial port
|
|
connector, and can currently only be used by IrTTY. To activate
|
|
support for MCP2120 dongles you will have to start irattach
|
|
like this: "irattach -d mcp2120".
|
|
|
|
You must build this dongle yourself. For more information see:
|
|
<http://www.eyetap.org/~tangf/irda_sir_linux.html>
|
|
|
|
config OLD_BELKIN_DONGLE
|
|
tristate "Old Belkin dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Adaptec Airport 1000
|
|
and 2000 dongles. If you want to compile it as a module, choose
|
|
M here. Some information is contained in the comments
|
|
at the top of <file:drivers/net/irda/old_belkin-sir.c>.
|
|
|
|
config ACT200L_DONGLE
|
|
tristate "ACTiSYS IR-200L dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-200L
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
|
|
port connector, and can currently only be used by IrTTY.
|
|
To activate support for ACTiSYS IR-200L dongle you will have to
|
|
start irattach like this: "irattach -d act200l".
|
|
|
|
config KINGSUN_DONGLE
|
|
tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun/DonShine
|
|
DS-620 IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speed only (9600 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
kingsun-sir.
|
|
|
|
config EP7211_DONGLE
|
|
tristate "EP7211 I/R support"
|
|
depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Cirrus logic
|
|
EP7211 chipset's infrared module.
|
|
|
|
config KSDAZZLE_DONGLE
|
|
tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun Dazzle
|
|
IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speeds only (9600 through 115200 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ksdazzle-sir.
|
|
|
|
config KS959_DONGLE
|
|
tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun KS-959
|
|
IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speeds only (9600 through 57600 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ks959-sir.
|
|
|
|
comment "FIR device drivers"
|
|
|
|
config USB_IRDA
|
|
tristate "IrDA USB dongles"
|
|
depends on IRDA && USB
|
|
select FW_LOADER
|
|
---help---
|
|
Say Y here if you want to build support for the USB IrDA FIR Dongle
|
|
device driver. To compile it as a module, choose M here: the module
|
|
will be called irda-usb. IrDA-USB support the various IrDA USB
|
|
dongles available and most of their peculiarities. Those dongles
|
|
plug in the USB port of your computer, are plug and play, and
|
|
support SIR and FIR (4Mbps) speeds. On the other hand, those
|
|
dongles tend to be less efficient than a FIR chipset.
|
|
|
|
Please note that the driver is still experimental. And of course,
|
|
you will need both USB and IrDA support in your kernel...
|
|
|
|
config SIGMATEL_FIR
|
|
tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
select CRC32
|
|
---help---
|
|
Say Y here if you want to build support for the SigmaTel STIr4200
|
|
USB IrDA FIR bridge device driver.
|
|
|
|
USB bridge based on the SigmaTel STIr4200 don't conform to the
|
|
IrDA-USB device class specification, and therefore need their
|
|
own specific driver. Those dongles support SIR and FIR (4Mbps)
|
|
speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
stir4200.
|
|
|
|
config NSC_FIR
|
|
tristate "NSC PC87108/PC87338"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the NSC PC87108 and
|
|
PC87338 IrDA chipsets. This driver supports SIR,
|
|
MIR and FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
nsc-ircc.
|
|
|
|
config WINBOND_FIR
|
|
tristate "Winbond W83977AF (IR)"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build IrDA support for the Winbond
|
|
W83977AF super-io chipset. This driver should be used for the IrDA
|
|
chipset in the Corel NetWinder. The driver supports SIR, MIR and
|
|
FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
w83977af_ir.
|
|
|
|
config TOSHIBA_FIR
|
|
tristate "Toshiba Type-O IR Port"
|
|
depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
|
|
help
|
|
Say Y here if you want to build support for the Toshiba Type-O IR
|
|
and Donau oboe chipsets. These chipsets are used by the Toshiba
|
|
Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
|
|
To compile it as a module, choose M here: the module will be called
|
|
donauboe.
|
|
|
|
config AU1000_FIR
|
|
tristate "Alchemy IrDA SIR/FIR"
|
|
depends on IRDA && MIPS_ALCHEMY
|
|
help
|
|
Say Y/M here to build suppor the the IrDA peripheral on the
|
|
Alchemy Au1000 and Au1100 SoCs.
|
|
Say M to build a module; it will be called au1k_ir.ko
|
|
|
|
config SMC_IRCC_FIR
|
|
tristate "SMSC IrCC (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the SMC Infrared
|
|
Communications Controller. It is used in a wide variety of
|
|
laptops (Fujitsu, Sony, Compaq and some Toshiba).
|
|
To compile it as a module, choose M here: the module will be called
|
|
smsc-ircc2.o.
|
|
|
|
config ALI_FIR
|
|
tristate "ALi M5123 FIR (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the ALi M5123 FIR
|
|
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
|
|
M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
|
|
SIR, MIR and FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ali-ircc.
|
|
|
|
config VLSI_FIR
|
|
tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && PCI
|
|
help
|
|
Say Y here if you want to build support for the VLSI 82C147
|
|
PCI-IrDA Controller. This controller is used by the HP OmniBook 800
|
|
and 5500 notebooks. The driver provides support for SIR, MIR and
|
|
FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
vlsi_ir.
|
|
|
|
config SA1100_FIR
|
|
tristate "SA1100 Internal IR"
|
|
depends on ARCH_SA1100 && IRDA
|
|
|
|
config VIA_FIR
|
|
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the VIA VT8231
|
|
and VIA VT1211 IrDA controllers, found on the motherboards using
|
|
those VIA chipsets. To use this controller, you will need
|
|
to plug a specific 5 pins FIR IrDA dongle in the specific
|
|
motherboard connector. The driver provides support for SIR, MIR
|
|
and FIR (4Mbps) speeds.
|
|
|
|
You will need to specify the 'dongle_id' module parameter to
|
|
indicate the FIR dongle attached to the controller.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
via-ircc.
|
|
|
|
config PXA_FICP
|
|
tristate "Intel PXA2xx Internal FICP"
|
|
depends on ARCH_PXA && IRDA
|
|
help
|
|
Say Y or M here if you want to build support for the PXA2xx
|
|
built-in IRDA interface which can support both SIR and FIR.
|
|
This driver relies on platform specific helper routines so
|
|
available capabilities may vary from one PXA2xx target to
|
|
another.
|
|
|
|
config MCS_FIR
|
|
tristate "MosChip MCS7780 IrDA-USB dongle"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
select CRC32
|
|
help
|
|
Say Y or M here if you want to build support for the MosChip
|
|
MCS7780 IrDA-USB bridge device driver.
|
|
|
|
USB bridge based on the MosChip MCS7780 don't conform to the
|
|
IrDA-USB device class specification, and therefore need their
|
|
own specific driver. Those dongles support SIR and FIR (4Mbps)
|
|
speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
mcs7780.
|
|
|
|
config SH_IRDA
|
|
tristate "SuperH IrDA driver"
|
|
depends on IRDA && ARCH_SHMOBILE
|
|
help
|
|
Say Y here if your want to enable SuperH IrDA devices.
|
|
|
|
endmenu
|
|
|