linux/drivers/macintosh/adb.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

899 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Device driver for the Apple Desktop Bus
* and the /dev/adb device on macintoshes.
*
* Copyright (C) 1996 Paul Mackerras.
*
* Modified to declare controllers as structures, added
* client notification of bus reset and handles PowerBook
* sleep, by Benjamin Herrenschmidt.
*
* To do:
*
* - /sys/bus/adb to list the devices and infos
* - more /dev/adb to allow userland to receive the
* flow of auto-polling datas from a given device.
* - move bus probe to a kernel thread
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/sched/signal.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <linux/notifier.h>
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/kthread.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#ifdef CONFIG_PPC
#include <asm/prom.h>
#include <asm/machdep.h>
#endif
EXPORT_SYMBOL(adb_client_list);
extern struct adb_driver via_macii_driver;
extern struct adb_driver via_cuda_driver;
extern struct adb_driver adb_iop_driver;
extern struct adb_driver via_pmu_driver;
extern struct adb_driver macio_adb_driver;
static DEFINE_MUTEX(adb_mutex);
static struct adb_driver *adb_driver_list[] = {
#ifdef CONFIG_ADB_MACII
&via_macii_driver,
#endif
#ifdef CONFIG_ADB_CUDA
&via_cuda_driver,
#endif
#ifdef CONFIG_ADB_IOP
&adb_iop_driver,
#endif
#if defined(CONFIG_ADB_PMU) || defined(CONFIG_ADB_PMU68K)
&via_pmu_driver,
#endif
#ifdef CONFIG_ADB_MACIO
&macio_adb_driver,
#endif
NULL
};
static struct class *adb_dev_class;
static struct adb_driver *adb_controller;
BLOCKING_NOTIFIER_HEAD(adb_client_list);
static int adb_got_sleep;
static int adb_inited;
static DEFINE_SEMAPHORE(adb_probe_mutex);
static int sleepy_trackpad;
static int autopoll_devs;
int __adb_probe_sync;
static int adb_scan_bus(void);
static int do_adb_reset_bus(void);
static void adbdev_init(void);
static int try_handler_change(int, int);
static struct adb_handler {
void (*handler)(unsigned char *, int, int);
int original_address;
int handler_id;
int busy;
} adb_handler[16];
/*
* The adb_handler_mutex mutex protects all accesses to the original_address
* and handler_id fields of adb_handler[i] for all i, and changes to the
* handler field.
* Accesses to the handler field are protected by the adb_handler_lock
* rwlock. It is held across all calls to any handler, so that by the
* time adb_unregister returns, we know that the old handler isn't being
* called.
*/
static DEFINE_MUTEX(adb_handler_mutex);
static DEFINE_RWLOCK(adb_handler_lock);
#if 0
static void printADBreply(struct adb_request *req)
{
int i;
printk("adb reply (%d)", req->reply_len);
for(i = 0; i < req->reply_len; i++)
printk(" %x", req->reply[i]);
printk("\n");
}
#endif
static int adb_scan_bus(void)
{
int i, highFree=0, noMovement;
int devmask = 0;
struct adb_request req;
/* assumes adb_handler[] is all zeroes at this point */
for (i = 1; i < 16; i++) {
/* see if there is anything at address i */
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
if (req.reply_len > 1)
/* one or more devices at this address */
adb_handler[i].original_address = i;
else if (i > highFree)
highFree = i;
}
/* Note we reset noMovement to 0 each time we move a device */
for (noMovement = 1; noMovement < 2 && highFree > 0; noMovement++) {
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
/*
* Send a "talk register 3" command to address i
* to provoke a collision if there is more than
* one device at this address.
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
/*
* Move the device(s) which didn't detect a
* collision to address `highFree'. Hopefully
* this only moves one device.
*/
adb_request(&req, NULL, ADBREQ_SYNC, 3,
(i<< 4) | 0xb, (highFree | 0x60), 0xfe);
/*
* See if anybody actually moved. This is suggested
* by HW TechNote 01:
*
* http://developer.apple.com/technotes/hw/hw_01.html
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(highFree << 4) | 0xf);
if (req.reply_len <= 1) continue;
/*
* Test whether there are any device(s) left
* at address i.
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
if (req.reply_len > 1) {
/*
* There are still one or more devices
* left at address i. Register the one(s)
* we moved to `highFree', and find a new
* value for highFree.
*/
adb_handler[highFree].original_address =
adb_handler[i].original_address;
while (highFree > 0 &&
adb_handler[highFree].original_address)
highFree--;
if (highFree <= 0)
break;
noMovement = 0;
} else {
/*
* No devices left at address i; move the
* one(s) we moved to `highFree' back to i.
*/
adb_request(&req, NULL, ADBREQ_SYNC, 3,
(highFree << 4) | 0xb,
(i | 0x60), 0xfe);
}
}
}
/* Now fill in the handler_id field of the adb_handler entries. */
printk(KERN_DEBUG "adb devices:");
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
adb_handler[i].handler_id = req.reply[2];
printk(" [%d]: %d %x", i, adb_handler[i].original_address,
adb_handler[i].handler_id);
devmask |= 1 << i;
}
printk("\n");
return devmask;
}
/*
* This kernel task handles ADB probing. It dies once probing is
* completed.
*/
static int
adb_probe_task(void *x)
{
printk(KERN_INFO "adb: starting probe task...\n");
do_adb_reset_bus();
printk(KERN_INFO "adb: finished probe task...\n");
up(&adb_probe_mutex);
return 0;
}
static void
__adb_probe_task(struct work_struct *bullshit)
{
kthread_run(adb_probe_task, NULL, "kadbprobe");
}
static DECLARE_WORK(adb_reset_work, __adb_probe_task);
int
adb_reset_bus(void)
{
if (__adb_probe_sync) {
do_adb_reset_bus();
return 0;
}
down(&adb_probe_mutex);
schedule_work(&adb_reset_work);
return 0;
}
#ifdef CONFIG_PM
/*
* notify clients before sleep
*/
static int __adb_suspend(struct platform_device *dev, pm_message_t state)
{
adb_got_sleep = 1;
/* We need to get a lock on the probe thread */
down(&adb_probe_mutex);
/* Stop autopoll */
if (adb_controller->autopoll)
adb_controller->autopoll(0);
blocking_notifier_call_chain(&adb_client_list, ADB_MSG_POWERDOWN, NULL);
return 0;
}
static int adb_suspend(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_SUSPEND);
}
static int adb_freeze(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_FREEZE);
}
static int adb_poweroff(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_HIBERNATE);
}
/*
* reset bus after sleep
*/
static int __adb_resume(struct platform_device *dev)
{
adb_got_sleep = 0;
up(&adb_probe_mutex);
adb_reset_bus();
return 0;
}
static int adb_resume(struct device *dev)
{
return __adb_resume(to_platform_device(dev));
}
#endif /* CONFIG_PM */
static int __init adb_init(void)
{
struct adb_driver *driver;
int i;
#ifdef CONFIG_PPC32
if (!machine_is(chrp) && !machine_is(powermac))
return 0;
#endif
#ifdef CONFIG_MAC
if (!MACH_IS_MAC)
return 0;
#endif
/* xmon may do early-init */
if (adb_inited)
return 0;
adb_inited = 1;
adb_controller = NULL;
i = 0;
while ((driver = adb_driver_list[i++]) != NULL) {
if (!driver->probe()) {
adb_controller = driver;
break;
}
}
if (adb_controller != NULL && adb_controller->init &&
adb_controller->init())
adb_controller = NULL;
if (adb_controller == NULL) {
printk(KERN_WARNING "Warning: no ADB interface detected\n");
} else {
#ifdef CONFIG_PPC
if (of_machine_is_compatible("AAPL,PowerBook1998") ||
of_machine_is_compatible("PowerBook1,1"))
sleepy_trackpad = 1;
#endif /* CONFIG_PPC */
adbdev_init();
adb_reset_bus();
}
return 0;
}
device_initcall(adb_init);
static int
do_adb_reset_bus(void)
{
int ret;
if (adb_controller == NULL)
return -ENXIO;
if (adb_controller->autopoll)
adb_controller->autopoll(0);
blocking_notifier_call_chain(&adb_client_list,
ADB_MSG_PRE_RESET, NULL);
if (sleepy_trackpad) {
/* Let the trackpad settle down */
msleep(500);
}
mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
memset(adb_handler, 0, sizeof(adb_handler));
write_unlock_irq(&adb_handler_lock);
/* That one is still a bit synchronous, oh well... */
if (adb_controller->reset_bus)
ret = adb_controller->reset_bus();
else
ret = 0;
if (sleepy_trackpad) {
/* Let the trackpad settle down */
msleep(1500);
}
if (!ret) {
autopoll_devs = adb_scan_bus();
if (adb_controller->autopoll)
adb_controller->autopoll(autopoll_devs);
}
mutex_unlock(&adb_handler_mutex);
blocking_notifier_call_chain(&adb_client_list,
ADB_MSG_POST_RESET, NULL);
return ret;
}
void
adb_poll(void)
{
if ((adb_controller == NULL)||(adb_controller->poll == NULL))
return;
adb_controller->poll();
}
EXPORT_SYMBOL(adb_poll);
static void adb_sync_req_done(struct adb_request *req)
{
struct completion *comp = req->arg;
complete(comp);
}
int
adb_request(struct adb_request *req, void (*done)(struct adb_request *),
int flags, int nbytes, ...)
{
va_list list;
int i;
int rc;
struct completion comp;
if ((adb_controller == NULL) || (adb_controller->send_request == NULL))
return -ENXIO;
if (nbytes < 1)
return -EINVAL;
req->nbytes = nbytes+1;
req->done = done;
req->reply_expected = flags & ADBREQ_REPLY;
req->data[0] = ADB_PACKET;
va_start(list, nbytes);
for (i = 0; i < nbytes; ++i)
req->data[i+1] = va_arg(list, int);
va_end(list);
if (flags & ADBREQ_NOSEND)
return 0;
/* Synchronous requests block using an on-stack completion */
if (flags & ADBREQ_SYNC) {
WARN_ON(done);
req->done = adb_sync_req_done;
req->arg = &comp;
init_completion(&comp);
}
rc = adb_controller->send_request(req, 0);
if ((flags & ADBREQ_SYNC) && !rc && !req->complete)
wait_for_completion(&comp);
return rc;
}
EXPORT_SYMBOL(adb_request);
/* Ultimately this should return the number of devices with
the given default id.
And it does it now ! Note: changed behaviour: This function
will now register if default_id _and_ handler_id both match
but handler_id can be left to 0 to match with default_id only.
When handler_id is set, this function will try to adjust
the handler_id id it doesn't match. */
int
adb_register(int default_id, int handler_id, struct adb_ids *ids,
void (*handler)(unsigned char *, int, int))
{
int i;
mutex_lock(&adb_handler_mutex);
ids->nids = 0;
for (i = 1; i < 16; i++) {
if ((adb_handler[i].original_address == default_id) &&
(!handler_id || (handler_id == adb_handler[i].handler_id) ||
try_handler_change(i, handler_id))) {
if (adb_handler[i].handler != 0) {
printk(KERN_ERR
"Two handlers for ADB device %d\n",
default_id);
continue;
}
write_lock_irq(&adb_handler_lock);
adb_handler[i].handler = handler;
write_unlock_irq(&adb_handler_lock);
ids->id[ids->nids++] = i;
}
}
mutex_unlock(&adb_handler_mutex);
return ids->nids;
}
EXPORT_SYMBOL(adb_register);
int
adb_unregister(int index)
{
int ret = -ENODEV;
mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
if (adb_handler[index].handler) {
while(adb_handler[index].busy) {
write_unlock_irq(&adb_handler_lock);
yield();
write_lock_irq(&adb_handler_lock);
}
ret = 0;
adb_handler[index].handler = NULL;
}
write_unlock_irq(&adb_handler_lock);
mutex_unlock(&adb_handler_mutex);
return ret;
}
EXPORT_SYMBOL(adb_unregister);
void
adb_input(unsigned char *buf, int nb, int autopoll)
{
int i, id;
static int dump_adb_input;
unsigned long flags;
void (*handler)(unsigned char *, int, int);
/* We skip keystrokes and mouse moves when the sleep process
* has been started. We stop autopoll, but this is another security
*/
if (adb_got_sleep)
return;
id = buf[0] >> 4;
if (dump_adb_input) {
printk(KERN_INFO "adb packet: ");
for (i = 0; i < nb; ++i)
printk(" %x", buf[i]);
printk(", id = %d\n", id);
}
write_lock_irqsave(&adb_handler_lock, flags);
handler = adb_handler[id].handler;
if (handler != NULL)
adb_handler[id].busy = 1;
write_unlock_irqrestore(&adb_handler_lock, flags);
if (handler != NULL) {
(*handler)(buf, nb, autopoll);
wmb();
adb_handler[id].busy = 0;
}
}
/* Try to change handler to new_id. Will return 1 if successful. */
static int try_handler_change(int address, int new_id)
{
struct adb_request req;
if (adb_handler[address].handler_id == new_id)
return 1;
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(address, 3), address | 0x20, new_id);
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
ADB_READREG(address, 3));
if (req.reply_len < 2)
return 0;
if (req.reply[2] != new_id)
return 0;
adb_handler[address].handler_id = req.reply[2];
return 1;
}
int
adb_try_handler_change(int address, int new_id)
{
int ret;
mutex_lock(&adb_handler_mutex);
ret = try_handler_change(address, new_id);
mutex_unlock(&adb_handler_mutex);
return ret;
}
EXPORT_SYMBOL(adb_try_handler_change);
int
adb_get_infos(int address, int *original_address, int *handler_id)
{
mutex_lock(&adb_handler_mutex);
*original_address = adb_handler[address].original_address;
*handler_id = adb_handler[address].handler_id;
mutex_unlock(&adb_handler_mutex);
return (*original_address != 0);
}
/*
* /dev/adb device driver.
*/
#define ADB_MAJOR 56 /* major number for /dev/adb */
struct adbdev_state {
spinlock_t lock;
atomic_t n_pending;
struct adb_request *completed;
wait_queue_head_t wait_queue;
int inuse;
};
static void adb_write_done(struct adb_request *req)
{
struct adbdev_state *state = (struct adbdev_state *) req->arg;
unsigned long flags;
if (!req->complete) {
req->reply_len = 0;
req->complete = 1;
}
spin_lock_irqsave(&state->lock, flags);
atomic_dec(&state->n_pending);
if (!state->inuse) {
kfree(req);
if (atomic_read(&state->n_pending) == 0) {
spin_unlock_irqrestore(&state->lock, flags);
kfree(state);
return;
}
} else {
struct adb_request **ap = &state->completed;
while (*ap != NULL)
ap = &(*ap)->next;
req->next = NULL;
*ap = req;
wake_up_interruptible(&state->wait_queue);
}
spin_unlock_irqrestore(&state->lock, flags);
}
static int
do_adb_query(struct adb_request *req)
{
int ret = -EINVAL;
switch(req->data[1]) {
case ADB_QUERY_GETDEVINFO:
if (req->nbytes < 3)
break;
mutex_lock(&adb_handler_mutex);
req->reply[0] = adb_handler[req->data[2]].original_address;
req->reply[1] = adb_handler[req->data[2]].handler_id;
mutex_unlock(&adb_handler_mutex);
req->complete = 1;
req->reply_len = 2;
adb_write_done(req);
ret = 0;
break;
}
return ret;
}
static int adb_open(struct inode *inode, struct file *file)
{
struct adbdev_state *state;
int ret = 0;
mutex_lock(&adb_mutex);
if (iminor(inode) > 0 || adb_controller == NULL) {
ret = -ENXIO;
goto out;
}
state = kmalloc(sizeof(struct adbdev_state), GFP_KERNEL);
if (state == 0) {
ret = -ENOMEM;
goto out;
}
file->private_data = state;
spin_lock_init(&state->lock);
atomic_set(&state->n_pending, 0);
state->completed = NULL;
init_waitqueue_head(&state->wait_queue);
state->inuse = 1;
out:
mutex_unlock(&adb_mutex);
return ret;
}
static int adb_release(struct inode *inode, struct file *file)
{
struct adbdev_state *state = file->private_data;
unsigned long flags;
mutex_lock(&adb_mutex);
if (state) {
file->private_data = NULL;
spin_lock_irqsave(&state->lock, flags);
if (atomic_read(&state->n_pending) == 0
&& state->completed == NULL) {
spin_unlock_irqrestore(&state->lock, flags);
kfree(state);
} else {
state->inuse = 0;
spin_unlock_irqrestore(&state->lock, flags);
}
}
mutex_unlock(&adb_mutex);
return 0;
}
static ssize_t adb_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
int ret = 0;
struct adbdev_state *state = file->private_data;
struct adb_request *req;
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
if (count < 2)
return -EINVAL;
if (count > sizeof(req->reply))
count = sizeof(req->reply);
req = NULL;
spin_lock_irqsave(&state->lock, flags);
add_wait_queue(&state->wait_queue, &wait);
set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
req = state->completed;
if (req != NULL)
state->completed = req->next;
else if (atomic_read(&state->n_pending) == 0)
ret = -EIO;
if (req != NULL || ret != 0)
break;
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
spin_unlock_irqrestore(&state->lock, flags);
schedule();
spin_lock_irqsave(&state->lock, flags);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&state->wait_queue, &wait);
spin_unlock_irqrestore(&state->lock, flags);
if (ret)
return ret;
ret = req->reply_len;
if (ret > count)
ret = count;
if (ret > 0 && copy_to_user(buf, req->reply, ret))
ret = -EFAULT;
kfree(req);
return ret;
}
static ssize_t adb_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
int ret/*, i*/;
struct adbdev_state *state = file->private_data;
struct adb_request *req;
if (count < 2 || count > sizeof(req->data))
return -EINVAL;
if (adb_controller == NULL)
return -ENXIO;
req = kmalloc(sizeof(struct adb_request),
GFP_KERNEL);
if (req == NULL)
return -ENOMEM;
req->nbytes = count;
req->done = adb_write_done;
req->arg = (void *) state;
req->complete = 0;
ret = -EFAULT;
if (copy_from_user(req->data, buf, count))
goto out;
atomic_inc(&state->n_pending);
/* If a probe is in progress or we are sleeping, wait for it to complete */
down(&adb_probe_mutex);
/* Queries are special requests sent to the ADB driver itself */
if (req->data[0] == ADB_QUERY) {
if (count > 1)
ret = do_adb_query(req);
else
ret = -EINVAL;
up(&adb_probe_mutex);
}
/* Special case for ADB_BUSRESET request, all others are sent to
the controller */
else if ((req->data[0] == ADB_PACKET) && (count > 1)
&& (req->data[1] == ADB_BUSRESET)) {
ret = do_adb_reset_bus();
up(&adb_probe_mutex);
atomic_dec(&state->n_pending);
if (ret == 0)
ret = count;
goto out;
} else {
req->reply_expected = ((req->data[1] & 0xc) == 0xc);
if (adb_controller && adb_controller->send_request)
ret = adb_controller->send_request(req, 0);
else
ret = -ENXIO;
up(&adb_probe_mutex);
}
if (ret != 0) {
atomic_dec(&state->n_pending);
goto out;
}
return count;
out:
kfree(req);
return ret;
}
static const struct file_operations adb_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = adb_read,
.write = adb_write,
.open = adb_open,
.release = adb_release,
};
#ifdef CONFIG_PM
static const struct dev_pm_ops adb_dev_pm_ops = {
.suspend = adb_suspend,
.resume = adb_resume,
/* Hibernate hooks */
.freeze = adb_freeze,
.thaw = adb_resume,
.poweroff = adb_poweroff,
.restore = adb_resume,
};
#endif
static struct platform_driver adb_pfdrv = {
.driver = {
.name = "adb",
#ifdef CONFIG_PM
.pm = &adb_dev_pm_ops,
#endif
},
};
static struct platform_device adb_pfdev = {
.name = "adb",
};
static int __init
adb_dummy_probe(struct platform_device *dev)
{
if (dev == &adb_pfdev)
return 0;
return -ENODEV;
}
static void __init
adbdev_init(void)
{
if (register_chrdev(ADB_MAJOR, "adb", &adb_fops)) {
printk(KERN_ERR "adb: unable to get major %d\n", ADB_MAJOR);
return;
}
adb_dev_class = class_create(THIS_MODULE, "adb");
if (IS_ERR(adb_dev_class))
return;
device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb");
platform_device_register(&adb_pfdev);
platform_driver_probe(&adb_pfdrv, adb_dummy_probe);
}