linux/Documentation/ABI/testing/sysfs-class-net-mesh

100 lines
4.0 KiB
Plaintext

What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
Date: May 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
Date: May 2011
Contact: Antonio Quartulli <antonio@meshcoding.com>
Description:
Indicates whether the data traffic going from a
wireless client to another wireless client will be
silently dropped. <vlan_subdir> is empty when referring
to the untagged lan.
What: /sys/class/net/<mesh_iface>/mesh/bonding
Date: June 2010
Contact: Simon Wunderlich <sw@simonwunderlich.de>
Description:
Indicates whether the data traffic going through the
mesh will be sent using multiple interfaces at the
same time (if available).
What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
Date: November 2011
Contact: Simon Wunderlich <sw@simonwunderlich.de>
Description:
Indicates whether the bridge loop avoidance feature
is enabled. This feature detects and avoids loops
between the mesh and devices bridged with the soft
interface <mesh_iface>.
What: /sys/class/net/<mesh_iface>/mesh/fragmentation
Date: October 2010
Contact: Andreas Langer <an.langer@gmx.de>
Description:
Indicates whether the data traffic going through the
mesh will be fragmented or silently discarded if the
packet size exceeds the outgoing interface MTU.
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
Date: October 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the bandwidth which is propagated by this
node if gw_mode was set to 'server'.
What: /sys/class/net/<mesh_iface>/mesh/gw_mode
Date: October 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the state of the gateway features. Can be
either 'off', 'client' or 'server'.
What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class
Date: October 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the selection criteria this node will use
to choose a gateway if gw_mode was set to 'client'.
What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
Date: Oct 2010
Contact: Linus Lüssing <linus.luessing@web.de>
Description:
Defines the penalty which will be applied to an
originator message's tq-field on every hop.
What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
Date: Nov 2013
Contact: Antonio Quartulli <antonio@meshcoding.com>
Description:
Defines the isolation mark (and its bitmask) which
is used to classify clients as "isolated" by the
Extended Isolation feature.
What: /sys/class/net/<mesh_iface>/mesh/network_coding
Date: Nov 2012
Contact: Martin Hundeboll <martin@hundeboll.net>
Description:
Controls whether Network Coding (using some magic
to send fewer wifi packets but still the same
content) is enabled or not.
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
Date: May 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the interval in milliseconds in which batman
sends its protocol messages.
What: /sys/class/net/<mesh_iface>/mesh/routing_algo
Date: Dec 2011
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Defines the routing procotol this mesh instance
uses to find the optimal paths through the mesh.