576 lines
14 KiB
C
576 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-pxa/trizeps4.c
|
|
*
|
|
* Support for the Keith und Koep Trizeps4 Module Platform.
|
|
*
|
|
* Author: Jürgen Schindele
|
|
* Created: 20 02, 2006
|
|
* Copyright: Jürgen Schindele
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/export.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include <mach/trizeps4.h>
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/irda-pxaficp.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/* comment out the following line if you want to use the
|
|
* Standard UART from PXA for serial / irda transmission
|
|
* and acivate it if you have status leds connected */
|
|
#define STATUS_LEDS_ON_STUART_PINS 1
|
|
|
|
/*****************************************************************************
|
|
* MultiFunctionPins of CPU
|
|
*****************************************************************************/
|
|
static unsigned long trizeps4_pin_config[] __initdata = {
|
|
/* Chip Selects */
|
|
GPIO15_nCS_1, /* DiskOnChip CS */
|
|
GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */
|
|
GPIO94_GPIO, /* DOC lock */
|
|
|
|
GPIO78_nCS_2, /* DM9000 CS */
|
|
GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */
|
|
|
|
GPIO79_nCS_3, /* Logic CS */
|
|
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
|
|
/* LCD - 16bpp Active TFT */
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
|
|
/* UART */
|
|
GPIO9_FFUART_CTS,
|
|
GPIO10_FFUART_DCD,
|
|
GPIO16_FFUART_TXD,
|
|
GPIO33_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO82_FFUART_DTR,
|
|
GPIO83_FFUART_RTS,
|
|
GPIO96_FFUART_RXD,
|
|
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
#ifdef STATUS_LEDS_ON_STUART_PINS
|
|
GPIO46_GPIO,
|
|
GPIO47_GPIO,
|
|
#else
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
#endif
|
|
/* PCMCIA */
|
|
GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
|
|
GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
GPIO102_nPCE_1,
|
|
GPIO104_PSKTSEL,
|
|
|
|
/* MultiMediaCard */
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */
|
|
|
|
/* USB OHCI */
|
|
GPIO88_USBH1_PWR, /* USBHPWR1 */
|
|
GPIO89_USBH1_PEN, /* USBHPEN1 */
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
};
|
|
|
|
static unsigned long trizeps4wl_pin_config[] __initdata = {
|
|
/* SSP 2 */
|
|
GPIO14_SSP2_SFRM,
|
|
GPIO19_SSP2_SCLK,
|
|
GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */
|
|
GPIO86_SSP2_RXD,
|
|
GPIO87_SSP2_TXD,
|
|
};
|
|
|
|
/****************************************************************************
|
|
* ONBOARD FLASH
|
|
****************************************************************************/
|
|
static struct mtd_partition trizeps4_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0x00000000,
|
|
.size = 0x00040000,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
}, {
|
|
.name = "Backup",
|
|
.offset = 0x00040000,
|
|
.size = 0x00040000,
|
|
}, {
|
|
.name = "Image",
|
|
.offset = 0x00080000,
|
|
.size = 0x01080000,
|
|
}, {
|
|
.name = "IPSM",
|
|
.offset = 0x01100000,
|
|
.size = 0x00e00000,
|
|
}, {
|
|
.name = "Registry",
|
|
.offset = 0x01f00000,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data trizeps4_flash_data[] = {
|
|
{
|
|
.width = 4, /* bankwidth in bytes */
|
|
.parts = trizeps4_partitions,
|
|
.nr_parts = ARRAY_SIZE(trizeps4_partitions)
|
|
}
|
|
};
|
|
|
|
static struct resource flash_resource = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device flash_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = trizeps4_flash_data,
|
|
},
|
|
.resource = &flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/****************************************************************************
|
|
* DAVICOM DM9000 Ethernet
|
|
****************************************************************************/
|
|
static struct resource dm9000_resources[] = {
|
|
[0] = {
|
|
.start = TRIZEPS4_ETH_PHYS+0x300,
|
|
.end = TRIZEPS4_ETH_PHYS+0x400-1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = TRIZEPS4_ETH_PHYS+0x8300,
|
|
.end = TRIZEPS4_ETH_PHYS+0x8400-1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = TRIZEPS4_ETH_IRQ,
|
|
.end = TRIZEPS4_ETH_IRQ,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
static struct dm9000_plat_data tri_dm9000_platdata = {
|
|
.flags = DM9000_PLATF_32BITONLY,
|
|
};
|
|
|
|
static struct platform_device dm9000_device = {
|
|
.name = "dm9000",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(dm9000_resources),
|
|
.resource = dm9000_resources,
|
|
.dev = {
|
|
.platform_data = &tri_dm9000_platdata,
|
|
}
|
|
};
|
|
|
|
/****************************************************************************
|
|
* LED's on GPIO pins of PXA
|
|
****************************************************************************/
|
|
static struct gpio_led trizeps4_led[] = {
|
|
#ifdef STATUS_LEDS_ON_STUART_PINS
|
|
{
|
|
.name = "led0:orange:heartbeat", /* */
|
|
.default_trigger = "heartbeat",
|
|
.gpio = GPIO_HEARTBEAT_LED,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "led1:yellow:cpubusy", /* */
|
|
.default_trigger = "cpu-busy",
|
|
.gpio = GPIO_SYS_BUSY_LED,
|
|
.active_low = 1,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct gpio_led_platform_data trizeps4_led_data = {
|
|
.leds = trizeps4_led,
|
|
.num_leds = ARRAY_SIZE(trizeps4_led),
|
|
};
|
|
|
|
static struct platform_device leds_devices = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &trizeps4_led_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *trizeps4_devices[] __initdata = {
|
|
&flash_device,
|
|
&dm9000_device,
|
|
&leds_devices,
|
|
};
|
|
|
|
static struct platform_device *trizeps4wl_devices[] __initdata = {
|
|
&flash_device,
|
|
&leds_devices,
|
|
};
|
|
|
|
static short trizeps_conxs_bcr;
|
|
|
|
/* PCCARD power switching supports only 3,3V */
|
|
void board_pcmcia_power(int power)
|
|
{
|
|
if (power) {
|
|
/* switch power on, put in reset and enable buffers */
|
|
trizeps_conxs_bcr |= power;
|
|
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
|
|
trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
/* wait a little */
|
|
udelay(2000);
|
|
/* take reset away */
|
|
trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
udelay(2000);
|
|
} else {
|
|
/* put in reset */
|
|
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
udelay(1000);
|
|
/* switch power off */
|
|
trizeps_conxs_bcr &= ~0xf;
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
}
|
|
pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
|
|
trizeps_conxs_bcr);
|
|
}
|
|
EXPORT_SYMBOL(board_pcmcia_power);
|
|
|
|
/* backlight power switching for LCD panel */
|
|
static void board_backlight_power(int on)
|
|
{
|
|
if (on)
|
|
trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
|
|
else
|
|
trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
|
|
|
|
pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
|
|
trizeps_conxs_bcr);
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
}
|
|
|
|
/* a I2C based RTC is known on CONXS board */
|
|
static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
|
|
{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
|
|
};
|
|
|
|
/****************************************************************************
|
|
* MMC card slot external to module
|
|
****************************************************************************/
|
|
static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
|
|
IRQF_TRIGGER_RISING, "MMC card detect", data);
|
|
if (err) {
|
|
printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
|
|
"MMC card detect IRQ\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void trizeps4_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(TRIZEPS4_MMC_IRQ, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data trizeps4_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.detect_delay_ms= 10,
|
|
.init = trizeps4_mci_init,
|
|
.exit = trizeps4_mci_exit,
|
|
.get_ro = NULL, /* write-protection not supported */
|
|
.setpower = NULL, /* power-switching not supported */
|
|
};
|
|
|
|
/****************************************************************************
|
|
* IRDA mode switching on stuart
|
|
****************************************************************************/
|
|
#ifndef STATUS_LEDS_ON_STUART_PINS
|
|
static short trizeps_conxs_ircr;
|
|
|
|
static int trizeps4_irda_startup(struct device *dev)
|
|
{
|
|
trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
|
|
IRCR_writew(trizeps_conxs_ircr);
|
|
return 0;
|
|
}
|
|
|
|
static void trizeps4_irda_shutdown(struct device *dev)
|
|
{
|
|
trizeps_conxs_ircr |= ConXS_IRCR_SD;
|
|
IRCR_writew(trizeps_conxs_ircr);
|
|
}
|
|
|
|
static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
/* Switch mode */
|
|
if (mode & IR_SIRMODE)
|
|
trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
|
|
else if (mode & IR_FIRMODE)
|
|
trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
|
|
|
|
/* Switch power */
|
|
if (mode & IR_OFF)
|
|
trizeps_conxs_ircr |= ConXS_IRCR_SD;
|
|
else
|
|
trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
|
|
|
|
IRCR_writew(trizeps_conxs_ircr);
|
|
local_irq_restore(flags);
|
|
|
|
pxa2xx_transceiver_mode(dev, mode);
|
|
}
|
|
|
|
static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
|
|
.gpio_pwdown = -1,
|
|
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
|
.transceiver_mode = trizeps4_irda_transceiver_mode,
|
|
.startup = trizeps4_irda_startup,
|
|
.shutdown = trizeps4_irda_shutdown,
|
|
};
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* OHCI USB port
|
|
****************************************************************************/
|
|
static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
};
|
|
|
|
static struct map_desc trizeps4_io_desc[] __initdata = {
|
|
{ /* ConXS CFSR */
|
|
.virtual = TRIZEPS4_CFSR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS BCR */
|
|
.virtual = TRIZEPS4_BOCR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS IRCR */
|
|
.virtual = TRIZEPS4_IRCR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS DCR */
|
|
.virtual = TRIZEPS4_DICR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
},
|
|
{ /* ConXS UPSR */
|
|
.virtual = TRIZEPS4_UPSR_VIRT,
|
|
.pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
|
|
.length = 0x00001000,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static struct pxafb_mode_info sharp_lcd_mode = {
|
|
.pixclock = 78000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 8,
|
|
.hsync_len = 4,
|
|
.left_margin = 4,
|
|
.right_margin = 4,
|
|
.vsync_len = 2,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lcd = {
|
|
.modes = &sharp_lcd_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
.pxafb_backlight_power = board_backlight_power,
|
|
};
|
|
|
|
static struct pxafb_mode_info toshiba_lcd_mode = {
|
|
.pixclock = 39720,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 8,
|
|
.hsync_len = 63,
|
|
.left_margin = 12,
|
|
.right_margin = 12,
|
|
.vsync_len = 4,
|
|
.upper_margin = 32,
|
|
.lower_margin = 10,
|
|
.sync = 0,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info toshiba_lcd = {
|
|
.modes = &toshiba_lcd_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
.pxafb_backlight_power = board_backlight_power,
|
|
};
|
|
|
|
static void __init trizeps4_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
|
|
if (machine_is_trizeps4wl()) {
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
|
|
platform_add_devices(trizeps4wl_devices,
|
|
ARRAY_SIZE(trizeps4wl_devices));
|
|
} else {
|
|
platform_add_devices(trizeps4_devices,
|
|
ARRAY_SIZE(trizeps4_devices));
|
|
}
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
if (0) /* dont know how to determine LCD */
|
|
pxa_set_fb_info(NULL, &sharp_lcd);
|
|
else
|
|
pxa_set_fb_info(NULL, &toshiba_lcd);
|
|
|
|
pxa_set_mci_info(&trizeps4_mci_platform_data);
|
|
#ifndef STATUS_LEDS_ON_STUART_PINS
|
|
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
|
|
#endif
|
|
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
|
|
pxa_set_ac97_info(NULL);
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, trizeps4_i2c_devices,
|
|
ARRAY_SIZE(trizeps4_i2c_devices));
|
|
|
|
/* this is the reset value */
|
|
trizeps_conxs_bcr = 0x00A0;
|
|
|
|
BCR_writew(trizeps_conxs_bcr);
|
|
board_backlight_power(1);
|
|
|
|
regulator_has_full_constraints();
|
|
}
|
|
|
|
static void __init trizeps4_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
|
|
|
|
if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
|
|
/* if flash is 16 bit wide its a Trizeps4 WL */
|
|
__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
|
|
trizeps4_flash_data[0].width = 2;
|
|
} else {
|
|
/* if flash is 32 bit wide its a Trizeps4 */
|
|
__machine_arch_type = MACH_TYPE_TRIZEPS4;
|
|
trizeps4_flash_data[0].width = 4;
|
|
}
|
|
}
|
|
|
|
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
|
|
/* MAINTAINER("Jürgen Schindele") */
|
|
.atag_offset = 0x100,
|
|
.init_machine = trizeps4_init,
|
|
.map_io = trizeps4_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|
|
|
|
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
|
|
/* MAINTAINER("Jürgen Schindele") */
|
|
.atag_offset = 0x100,
|
|
.init_machine = trizeps4_init,
|
|
.map_io = trizeps4_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|