561 lines
12 KiB
C
561 lines
12 KiB
C
/*
|
|
* linux/drivers/sound/vidc.c
|
|
*
|
|
* Copyright (C) 1997-2000 by Russell King <rmk@arm.linux.org.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* VIDC20 audio driver.
|
|
*
|
|
* The VIDC20 sound hardware consists of the VIDC20 itself, a DAC and a DMA
|
|
* engine. The DMA transfers fixed-format (16-bit little-endian linear)
|
|
* samples to the VIDC20, which then transfers this data serially to the
|
|
* DACs. The samplerate is controlled by the VIDC.
|
|
*
|
|
* We currently support a mixer device, but it is currently non-functional.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/hardware/iomd.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "sound_config.h"
|
|
#include "vidc.h"
|
|
|
|
#ifndef _SIOC_TYPE
|
|
#define _SIOC_TYPE(x) _IOC_TYPE(x)
|
|
#endif
|
|
#ifndef _SIOC_NR
|
|
#define _SIOC_NR(x) _IOC_NR(x)
|
|
#endif
|
|
|
|
#define VIDC_SOUND_CLOCK (250000)
|
|
#define VIDC_SOUND_CLOCK_EXT (176400)
|
|
|
|
/*
|
|
* When using SERIAL SOUND mode (external DAC), the number of physical
|
|
* channels is fixed at 2.
|
|
*/
|
|
static int vidc_busy;
|
|
static int vidc_adev;
|
|
static int vidc_audio_rate;
|
|
static char vidc_audio_format;
|
|
static char vidc_audio_channels;
|
|
|
|
static unsigned char vidc_level_l[SOUND_MIXER_NRDEVICES] = {
|
|
85, /* master */
|
|
50, /* bass */
|
|
50, /* treble */
|
|
0, /* synth */
|
|
75, /* pcm */
|
|
0, /* speaker */
|
|
100, /* ext line */
|
|
0, /* mic */
|
|
100, /* CD */
|
|
0,
|
|
};
|
|
|
|
static unsigned char vidc_level_r[SOUND_MIXER_NRDEVICES] = {
|
|
85, /* master */
|
|
50, /* bass */
|
|
50, /* treble */
|
|
0, /* synth */
|
|
75, /* pcm */
|
|
0, /* speaker */
|
|
100, /* ext line */
|
|
0, /* mic */
|
|
100, /* CD */
|
|
0,
|
|
};
|
|
|
|
static unsigned int vidc_audio_volume_l; /* left PCM vol, 0 - 65536 */
|
|
static unsigned int vidc_audio_volume_r; /* right PCM vol, 0 - 65536 */
|
|
|
|
extern void vidc_update_filler(int bits, int channels);
|
|
extern int softoss_dev;
|
|
|
|
static void
|
|
vidc_mixer_set(int mdev, unsigned int level)
|
|
{
|
|
unsigned int lev_l = level & 0x007f;
|
|
unsigned int lev_r = (level & 0x7f00) >> 8;
|
|
unsigned int mlev_l, mlev_r;
|
|
|
|
if (lev_l > 100)
|
|
lev_l = 100;
|
|
if (lev_r > 100)
|
|
lev_r = 100;
|
|
|
|
#define SCALE(lev,master) ((lev) * (master) * 65536 / 10000)
|
|
|
|
mlev_l = vidc_level_l[SOUND_MIXER_VOLUME];
|
|
mlev_r = vidc_level_r[SOUND_MIXER_VOLUME];
|
|
|
|
switch (mdev) {
|
|
case SOUND_MIXER_VOLUME:
|
|
case SOUND_MIXER_PCM:
|
|
vidc_level_l[mdev] = lev_l;
|
|
vidc_level_r[mdev] = lev_r;
|
|
|
|
vidc_audio_volume_l = SCALE(lev_l, mlev_l);
|
|
vidc_audio_volume_r = SCALE(lev_r, mlev_r);
|
|
/*printk("VIDC: PCM vol %05X %05X\n", vidc_audio_volume_l, vidc_audio_volume_r);*/
|
|
break;
|
|
}
|
|
#undef SCALE
|
|
}
|
|
|
|
static int vidc_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
|
|
{
|
|
unsigned int val;
|
|
unsigned int mdev;
|
|
|
|
if (_SIOC_TYPE(cmd) != 'M')
|
|
return -EINVAL;
|
|
|
|
mdev = _SIOC_NR(cmd);
|
|
|
|
if (_SIOC_DIR(cmd) & _SIOC_WRITE) {
|
|
if (get_user(val, (unsigned int __user *)arg))
|
|
return -EFAULT;
|
|
|
|
if (mdev < SOUND_MIXER_NRDEVICES)
|
|
vidc_mixer_set(mdev, val);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Return parameters
|
|
*/
|
|
switch (mdev) {
|
|
case SOUND_MIXER_RECSRC:
|
|
val = 0;
|
|
break;
|
|
|
|
case SOUND_MIXER_DEVMASK:
|
|
val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH;
|
|
break;
|
|
|
|
case SOUND_MIXER_STEREODEVS:
|
|
val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH;
|
|
break;
|
|
|
|
case SOUND_MIXER_RECMASK:
|
|
val = 0;
|
|
break;
|
|
|
|
case SOUND_MIXER_CAPS:
|
|
val = 0;
|
|
break;
|
|
|
|
default:
|
|
if (mdev < SOUND_MIXER_NRDEVICES)
|
|
val = vidc_level_l[mdev] | vidc_level_r[mdev] << 8;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
return put_user(val, (unsigned int __user *)arg) ? -EFAULT : 0;
|
|
}
|
|
|
|
static unsigned int vidc_audio_set_format(int dev, unsigned int fmt)
|
|
{
|
|
switch (fmt) {
|
|
default:
|
|
fmt = AFMT_S16_LE;
|
|
case AFMT_U8:
|
|
case AFMT_S8:
|
|
case AFMT_S16_LE:
|
|
vidc_audio_format = fmt;
|
|
vidc_update_filler(vidc_audio_format, vidc_audio_channels);
|
|
case AFMT_QUERY:
|
|
break;
|
|
}
|
|
return vidc_audio_format;
|
|
}
|
|
|
|
#define my_abs(i) ((i)<0 ? -(i) : (i))
|
|
|
|
static int vidc_audio_set_speed(int dev, int rate)
|
|
{
|
|
if (rate) {
|
|
unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext;
|
|
unsigned int diff_int, diff_ext;
|
|
unsigned int newsize, new2size;
|
|
|
|
hwctrl = 0x00000003;
|
|
|
|
/* Using internal clock */
|
|
hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1;
|
|
if (hwrate < 3)
|
|
hwrate = 3;
|
|
if (hwrate > 255)
|
|
hwrate = 255;
|
|
|
|
/* Using exernal clock */
|
|
hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1;
|
|
if (hwrate_ext < 3)
|
|
hwrate_ext = 3;
|
|
if (hwrate_ext > 255)
|
|
hwrate_ext = 255;
|
|
|
|
rate_int = VIDC_SOUND_CLOCK / hwrate;
|
|
rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext;
|
|
|
|
/* Chose between external and internal clock */
|
|
diff_int = my_abs(rate_ext-rate);
|
|
diff_ext = my_abs(rate_int-rate);
|
|
if (diff_ext < diff_int) {
|
|
/*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/
|
|
hwrate=hwrate_ext;
|
|
hwctrl=0x00000002;
|
|
/* Allow roughly 0.4% tolerance */
|
|
if (diff_ext > (rate/256))
|
|
rate=rate_ext;
|
|
} else {
|
|
/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
|
|
hwctrl=0x00000003;
|
|
/* Allow rougly 0.4% tolerance */
|
|
if (diff_int > (rate/256))
|
|
rate=rate_int;
|
|
}
|
|
|
|
vidc_writel(0xb0000000 | (hwrate - 2));
|
|
vidc_writel(0xb1000000 | hwctrl);
|
|
|
|
newsize = (10000 / hwrate) & ~3;
|
|
if (newsize < 208)
|
|
newsize = 208;
|
|
if (newsize > 4096)
|
|
newsize = 4096;
|
|
for (new2size = 128; new2size < newsize; new2size <<= 1);
|
|
if (new2size - newsize > newsize - (new2size >> 1))
|
|
new2size >>= 1;
|
|
if (new2size > 4096) {
|
|
printk(KERN_ERR "VIDC: error: dma buffer (%d) %d > 4K\n",
|
|
newsize, new2size);
|
|
new2size = 4096;
|
|
}
|
|
/*printk("VIDC: dma size %d\n", new2size);*/
|
|
dma_bufsize = new2size;
|
|
vidc_audio_rate = rate;
|
|
}
|
|
return vidc_audio_rate;
|
|
}
|
|
|
|
static short vidc_audio_set_channels(int dev, short channels)
|
|
{
|
|
switch (channels) {
|
|
default:
|
|
channels = 2;
|
|
case 1:
|
|
case 2:
|
|
vidc_audio_channels = channels;
|
|
vidc_update_filler(vidc_audio_format, vidc_audio_channels);
|
|
case 0:
|
|
break;
|
|
}
|
|
return vidc_audio_channels;
|
|
}
|
|
|
|
/*
|
|
* Open the device
|
|
*/
|
|
static int vidc_audio_open(int dev, int mode)
|
|
{
|
|
/* This audio device does not have recording capability */
|
|
if (mode == OPEN_READ)
|
|
return -EPERM;
|
|
|
|
if (vidc_busy)
|
|
return -EBUSY;
|
|
|
|
vidc_busy = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Close the device
|
|
*/
|
|
static void vidc_audio_close(int dev)
|
|
{
|
|
vidc_busy = 0;
|
|
}
|
|
|
|
/*
|
|
* Output a block via DMA to sound device.
|
|
*
|
|
* We just set the DMA start and count; the DMA interrupt routine
|
|
* will take care of formatting the samples (via the appropriate
|
|
* vidc_filler routine), and flag via vidc_audio_dma_interrupt when
|
|
* more data is required.
|
|
*/
|
|
static void
|
|
vidc_audio_output_block(int dev, unsigned long buf, int total_count, int one)
|
|
{
|
|
struct dma_buffparms *dmap = audio_devs[dev]->dmap_out;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
dma_start = buf - (unsigned long)dmap->raw_buf_phys + (unsigned long)dmap->raw_buf;
|
|
dma_count = total_count;
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void
|
|
vidc_audio_start_input(int dev, unsigned long buf, int count, int intrflag)
|
|
{
|
|
}
|
|
|
|
static int vidc_audio_prepare_for_input(int dev, int bsize, int bcount)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static irqreturn_t vidc_audio_dma_interrupt(void)
|
|
{
|
|
DMAbuf_outputintr(vidc_adev, 1);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Prepare for outputting samples.
|
|
*
|
|
* Each buffer that will be passed will be `bsize' bytes long,
|
|
* with a total of `bcount' buffers.
|
|
*/
|
|
static int vidc_audio_prepare_for_output(int dev, int bsize, int bcount)
|
|
{
|
|
struct audio_operations *adev = audio_devs[dev];
|
|
|
|
dma_interrupt = NULL;
|
|
adev->dmap_out->flags |= DMA_NODMA;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Stop our current operation.
|
|
*/
|
|
static void vidc_audio_reset(int dev)
|
|
{
|
|
dma_interrupt = NULL;
|
|
}
|
|
|
|
static int vidc_audio_local_qlen(int dev)
|
|
{
|
|
return /*dma_count !=*/ 0;
|
|
}
|
|
|
|
static void vidc_audio_trigger(int dev, int enable_bits)
|
|
{
|
|
struct audio_operations *adev = audio_devs[dev];
|
|
|
|
if (enable_bits & PCM_ENABLE_OUTPUT) {
|
|
if (!(adev->flags & DMA_ACTIVE)) {
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* prevent recusion */
|
|
adev->flags |= DMA_ACTIVE;
|
|
|
|
dma_interrupt = vidc_audio_dma_interrupt;
|
|
vidc_sound_dma_irq(0, NULL);
|
|
iomd_writeb(DMA_CR_E | 0x10, IOMD_SD0CR);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct audio_driver vidc_audio_driver =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.open = vidc_audio_open,
|
|
.close = vidc_audio_close,
|
|
.output_block = vidc_audio_output_block,
|
|
.start_input = vidc_audio_start_input,
|
|
.prepare_for_input = vidc_audio_prepare_for_input,
|
|
.prepare_for_output = vidc_audio_prepare_for_output,
|
|
.halt_io = vidc_audio_reset,
|
|
.local_qlen = vidc_audio_local_qlen,
|
|
.trigger = vidc_audio_trigger,
|
|
.set_speed = vidc_audio_set_speed,
|
|
.set_bits = vidc_audio_set_format,
|
|
.set_channels = vidc_audio_set_channels
|
|
};
|
|
|
|
static struct mixer_operations vidc_mixer_operations = {
|
|
.owner = THIS_MODULE,
|
|
.id = "VIDC",
|
|
.name = "VIDCsound",
|
|
.ioctl = vidc_mixer_ioctl
|
|
};
|
|
|
|
void vidc_update_filler(int format, int channels)
|
|
{
|
|
#define TYPE(fmt,ch) (((fmt)<<2) | ((ch)&3))
|
|
|
|
switch (TYPE(format, channels)) {
|
|
default:
|
|
case TYPE(AFMT_U8, 1):
|
|
vidc_filler = vidc_fill_1x8_u;
|
|
break;
|
|
|
|
case TYPE(AFMT_U8, 2):
|
|
vidc_filler = vidc_fill_2x8_u;
|
|
break;
|
|
|
|
case TYPE(AFMT_S8, 1):
|
|
vidc_filler = vidc_fill_1x8_s;
|
|
break;
|
|
|
|
case TYPE(AFMT_S8, 2):
|
|
vidc_filler = vidc_fill_2x8_s;
|
|
break;
|
|
|
|
case TYPE(AFMT_S16_LE, 1):
|
|
vidc_filler = vidc_fill_1x16_s;
|
|
break;
|
|
|
|
case TYPE(AFMT_S16_LE, 2):
|
|
vidc_filler = vidc_fill_2x16_s;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __init attach_vidc(struct address_info *hw_config)
|
|
{
|
|
char name[32];
|
|
int i, adev;
|
|
|
|
sprintf(name, "VIDC %d-bit sound", hw_config->card_subtype);
|
|
conf_printf(name, hw_config);
|
|
memset(dma_buf, 0, sizeof(dma_buf));
|
|
|
|
adev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, name,
|
|
&vidc_audio_driver, sizeof(vidc_audio_driver),
|
|
DMA_AUTOMODE, AFMT_U8 | AFMT_S8 | AFMT_S16_LE,
|
|
NULL, hw_config->dma, hw_config->dma2);
|
|
|
|
if (adev < 0)
|
|
goto audio_failed;
|
|
|
|
/*
|
|
* 1024 bytes => 64 buffers
|
|
*/
|
|
audio_devs[adev]->min_fragment = 10;
|
|
audio_devs[adev]->mixer_dev = num_mixers;
|
|
|
|
audio_devs[adev]->mixer_dev =
|
|
sound_install_mixer(MIXER_DRIVER_VERSION,
|
|
name, &vidc_mixer_operations,
|
|
sizeof(vidc_mixer_operations), NULL);
|
|
|
|
if (audio_devs[adev]->mixer_dev < 0)
|
|
goto mixer_failed;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
dma_buf[i] = get_zeroed_page(GFP_KERNEL);
|
|
if (!dma_buf[i]) {
|
|
printk(KERN_ERR "%s: can't allocate required buffers\n",
|
|
name);
|
|
goto mem_failed;
|
|
}
|
|
dma_pbuf[i] = virt_to_phys((void *)dma_buf[i]);
|
|
}
|
|
|
|
if (sound_alloc_dma(hw_config->dma, hw_config->name)) {
|
|
printk(KERN_ERR "%s: DMA %d is in use\n", name, hw_config->dma);
|
|
goto dma_failed;
|
|
}
|
|
|
|
if (request_irq(hw_config->irq, vidc_sound_dma_irq, 0,
|
|
hw_config->name, &dma_start)) {
|
|
printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq);
|
|
goto irq_failed;
|
|
}
|
|
vidc_adev = adev;
|
|
vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
|
|
|
|
#if defined(CONFIG_SOUND_SOFTOSS) || defined(CONFIG_SOUND_SOFTOSS_MODULE)
|
|
softoss_dev = adev;
|
|
#endif
|
|
return;
|
|
|
|
irq_failed:
|
|
sound_free_dma(hw_config->dma);
|
|
dma_failed:
|
|
mem_failed:
|
|
for (i = 0; i < 2; i++)
|
|
free_page(dma_buf[i]);
|
|
sound_unload_mixerdev(audio_devs[adev]->mixer_dev);
|
|
mixer_failed:
|
|
sound_unload_audiodev(adev);
|
|
audio_failed:
|
|
return;
|
|
}
|
|
|
|
static int __init probe_vidc(struct address_info *hw_config)
|
|
{
|
|
hw_config->irq = IRQ_DMAS0;
|
|
hw_config->dma = DMA_VIRTUAL_SOUND;
|
|
hw_config->dma2 = -1;
|
|
hw_config->card_subtype = 16;
|
|
hw_config->name = "VIDC20";
|
|
return 1;
|
|
}
|
|
|
|
static void __exit unload_vidc(struct address_info *hw_config)
|
|
{
|
|
int i, adev = vidc_adev;
|
|
|
|
vidc_adev = -1;
|
|
|
|
free_irq(hw_config->irq, &dma_start);
|
|
sound_free_dma(hw_config->dma);
|
|
|
|
if (adev >= 0) {
|
|
sound_unload_mixerdev(audio_devs[adev]->mixer_dev);
|
|
sound_unload_audiodev(adev);
|
|
for (i = 0; i < 2; i++)
|
|
free_page(dma_buf[i]);
|
|
}
|
|
}
|
|
|
|
static struct address_info cfg;
|
|
|
|
static int __init init_vidc(void)
|
|
{
|
|
if (probe_vidc(&cfg) == 0)
|
|
return -ENODEV;
|
|
|
|
attach_vidc(&cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit cleanup_vidc(void)
|
|
{
|
|
unload_vidc(&cfg);
|
|
}
|
|
|
|
module_init(init_vidc);
|
|
module_exit(cleanup_vidc);
|
|
|
|
MODULE_AUTHOR("Russell King");
|
|
MODULE_DESCRIPTION("VIDC20 audio driver");
|
|
MODULE_LICENSE("GPL");
|