OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
56c09aa520
linux/drivers/media/dvb/dvb-usb/dibusb-mb.c
Mauro Carvalho Chehab 2f4f58d689 [media] rc: Name RC keymap tables as rc_map_table 
Remote keytables had different names all over the place. Part of the fault
is due to a bad naming when rc subsystem was created, but there were lots
of old names that were still here.

Use a common standard for everything.

Patch generated by this script:

for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:51 -02:00

478 lines
14 KiB
C
Raw Blame History

/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
* reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* based on GPL code from DiBcom, which has
* Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "dibusb.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dibusb_state *st = adap->priv;
return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr);
}
static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dib3000_config demod_cfg;
struct dibusb_state *st = adap->priv;
demod_cfg.demod_address = 0x8;
if ((adap->fe = dvb_attach(dib3000mb_attach, &demod_cfg,
&adap->dev->i2c_adap, &st->ops)) == NULL)
return -ENODEV;
adap->fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl;
return 0;
}
static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dibusb_state *st = adap->priv;
st->tuner_addr = 0x61;
dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
DVB_PLL_TUA6010XS);
return 0;
}
static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dibusb_state *st = adap->priv;
st->tuner_addr = 0x60;
dvb_attach(dvb_pll_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
DVB_PLL_TDA665X);
return 0;
}
/* Some of the Artec 1.1 device aren't equipped with the default tuner
* (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures
* this out. */
static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
{
u8 b[2] = { 0,0 }, b2[1];
int ret = 0;
struct i2c_msg msg[2] = {
{ .flags = 0, .buf = b, .len = 2 },
{ .flags = I2C_M_RD, .buf = b2, .len = 1 },
};
struct dibusb_state *st = adap->priv;
/* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */
msg[0].addr = msg[1].addr = st->tuner_addr = 0x60;
if (adap->fe->ops.i2c_gate_ctrl)
adap->fe->ops.i2c_gate_ctrl(adap->fe,1);
if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
err("tuner i2c write failed.");
ret = -EREMOTEIO;
}
if (adap->fe->ops.i2c_gate_ctrl)
adap->fe->ops.i2c_gate_ctrl(adap->fe,0);
if (b2[0] == 0xfe) {
info("This device has the Thomson Cable onboard. Which is default.");
ret = dibusb_thomson_tuner_attach(adap);
} else {
info("This device has the Panasonic ENV77H11D5 onboard.");
ret = dibusb_panasonic_tuner_attach(adap);
}
return ret;
}
/* USB Driver stuff */
static struct dvb_usb_device_properties dibusb1_1_properties;
static struct dvb_usb_device_properties dibusb1_1_an2235_properties;
static struct dvb_usb_device_properties dibusb2_0b_properties;
static struct dvb_usb_device_properties artec_t1_usb2_properties;
static int dibusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dibusb2_0b_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties,
THIS_MODULE, NULL, adapter_nr))
return 0;
return -EINVAL;
}
/* do not change the order of the ID table */
static struct usb_device_id dibusb_dib3000mb_table [] = {
/* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD) },
/* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM) },
/* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) },
/* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) },
/* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) },
/* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) },
/* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) },
/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) },
/* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) },
/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) },
/* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) },
/* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) },
/* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) },
/* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) },
/* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) },
/* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) },
/* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) },
/* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) },
/* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) },
/* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) },
/* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) },
/* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
/* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
/* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) },
/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */
/* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) },
/* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) },
/* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) },
/* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) },
/* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) },
/* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) },
/*
* XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices
* we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that
* have been left on the device. If you don't have such a device but an Artec
* device that's supposed to work with this driver but is not detected by it,
* free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config.
*/
#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
/* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
#endif
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table);
static struct dvb_usb_device_properties dibusb1_1_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_AN2135,
.firmware = "dvb-usb-dibusb-5.0.0.11.fw",
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
.streaming_ctrl = dibusb_streaming_ctrl,
.pid_filter = dibusb_pid_filter,
.pid_filter_ctrl = dibusb_pid_filter_ctrl,
.frontend_attach = dibusb_dib3000mb_frontend_attach,
.tuner_attach = dibusb_tuner_probe_and_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x02,
.u = {
.bulk = {
.buffersize = 4096,
}
}
},
.size_of_priv = sizeof(struct dibusb_state),
}
},
.power_ctrl = dibusb_power_ctrl,
.rc.legacy = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_map_table = rc_map_dibusb_table,
.rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
.rc_query = dibusb_rc_query,
},
.i2c_algo = &dibusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 9,
.devices = {
{ "AVerMedia AverTV DVBT USB1.1",
{ &dibusb_dib3000mb_table[0], NULL },
{ &dibusb_dib3000mb_table[1], NULL },
},
{ "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)",
{ &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL},
{ &dibusb_dib3000mb_table[3], NULL },
},
{ "DiBcom USB1.1 DVB-T reference design (MOD3000)",
{ &dibusb_dib3000mb_table[5], NULL },
{ &dibusb_dib3000mb_table[6], NULL },
},
{ "KWorld V-Stream XPERT DTV - DVB-T USB1.1",
{ &dibusb_dib3000mb_table[7], NULL },
{ &dibusb_dib3000mb_table[8], NULL },
},
{ "Grandtec USB1.1 DVB-T",
{ &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL },
{ &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL },
},
{ "Unknown USB1.1 DVB-T device ???? please report the name to the author",
{ &dibusb_dib3000mb_table[13], NULL },
{ &dibusb_dib3000mb_table[14], NULL },
},
{ "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device",
{ &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL},
{ &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL},
},
{ "Artec T1 USB1.1 TVBOX with AN2135",
{ &dibusb_dib3000mb_table[19], NULL },
{ &dibusb_dib3000mb_table[20], NULL },
},
{ "VideoWalker DVB-T USB",
{ &dibusb_dib3000mb_table[25], NULL },
{ &dibusb_dib3000mb_table[26], NULL },
},
}
};
static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_AN2235,
.firmware = "dvb-usb-dibusb-an2235-01.fw",
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
.pid_filter_count = 16,
.streaming_ctrl = dibusb_streaming_ctrl,
.pid_filter = dibusb_pid_filter,
.pid_filter_ctrl = dibusb_pid_filter_ctrl,
.frontend_attach = dibusb_dib3000mb_frontend_attach,
.tuner_attach = dibusb_tuner_probe_and_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x02,
.u = {
.bulk = {
.buffersize = 4096,
}
}
},
.size_of_priv = sizeof(struct dibusb_state),
},
},
.power_ctrl = dibusb_power_ctrl,
.rc.legacy = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_map_table = rc_map_dibusb_table,
.rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
.rc_query = dibusb_rc_query,
},
.i2c_algo = &dibusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
.num_device_descs = 2,
#else
.num_device_descs = 1,
#endif
.devices = {
{ "Artec T1 USB1.1 TVBOX with AN2235",
{ &dibusb_dib3000mb_table[21], NULL },
{ &dibusb_dib3000mb_table[22], NULL },
},
#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
{ "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)",
{ &dibusb_dib3000mb_table[30], NULL },
{ NULL },
},
{ NULL },
#endif
}
};
static struct dvb_usb_device_properties dibusb2_0b_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-adstech-usb2-02.fw",
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
.streaming_ctrl = dibusb2_0_streaming_ctrl,
.pid_filter = dibusb_pid_filter,
.pid_filter_ctrl = dibusb_pid_filter_ctrl,
.frontend_attach = dibusb_dib3000mb_frontend_attach,
.tuner_attach = dibusb_thomson_tuner_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x06,
.u = {
.bulk = {
.buffersize = 4096,
}
}
},
.size_of_priv = sizeof(struct dibusb_state),
}
},
.power_ctrl = dibusb2_0_power_ctrl,
.rc.legacy = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_map_table = rc_map_dibusb_table,
.rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
.rc_query = dibusb_rc_query,
},
.i2c_algo = &dibusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 2,
.devices = {
{ "KWorld/ADSTech Instant DVB-T USB2.0",
{ &dibusb_dib3000mb_table[23], NULL },
{ &dibusb_dib3000mb_table[24], NULL },
},
{ "KWorld Xpert DVB-T USB2.0",
{ &dibusb_dib3000mb_table[27], NULL },
{ NULL }
},
{ NULL },
}
};
static struct dvb_usb_device_properties artec_t1_usb2_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-dibusb-6.0.0.8.fw",
.num_adapters = 1,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
.streaming_ctrl = dibusb2_0_streaming_ctrl,
.pid_filter = dibusb_pid_filter,
.pid_filter_ctrl = dibusb_pid_filter_ctrl,
.frontend_attach = dibusb_dib3000mb_frontend_attach,
.tuner_attach = dibusb_tuner_probe_and_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x06,
.u = {
.bulk = {
.buffersize = 4096,
}
}
},
.size_of_priv = sizeof(struct dibusb_state),
}
},
.power_ctrl = dibusb2_0_power_ctrl,
.rc.legacy = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_map_table = rc_map_dibusb_table,
.rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
.rc_query = dibusb_rc_query,
},
.i2c_algo = &dibusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 1,
.devices = {
{ "Artec T1 USB2.0",
{ &dibusb_dib3000mb_table[28], NULL },
{ &dibusb_dib3000mb_table[29], NULL },
},
{ NULL },
}
};
static struct usb_driver dibusb_driver = {
.name = "dvb_usb_dibusb_mb",
.probe = dibusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mb_table,
};
/* module stuff */
static int __init dibusb_module_init(void)
{
int result;
if ((result = usb_register(&dibusb_driver))) {
err("usb_register failed. Error number %d",result);
return result;
}
return 0;
}
static void __exit dibusb_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&dibusb_driver);
}
module_init (dibusb_module_init);
module_exit (dibusb_module_exit);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink