linux/drivers/usb/otg/ab8500-usb.c
Dan Carpenter 5f0b3f9998 usb: otg: ab8500-usb: make probe() work again
The probe() function will always fail because we're testing the wrong
variable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-02 16:22:11 -08:00

597 lines
14 KiB
C

/*
* drivers/usb/otg/ab8500_usb.c
*
* USB transceiver driver for AB8500 chip
*
* Copyright (C) 2010 ST-Ericsson AB
* Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#define AB8500_MAIN_WD_CTRL_REG 0x01
#define AB8500_USB_LINE_STAT_REG 0x80
#define AB8500_USB_PHY_CTRL_REG 0x8A
#define AB8500_BIT_OTG_STAT_ID (1 << 0)
#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
#define AB8500_V1x_LINK_STAT_WAIT (HZ/10)
#define AB8500_WD_KICK_DELAY_US 100 /* usec */
#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */
/* Usb line status register */
enum ab8500_usb_link_status {
USB_LINK_NOT_CONFIGURED = 0,
USB_LINK_STD_HOST_NC,
USB_LINK_STD_HOST_C_NS,
USB_LINK_STD_HOST_C_S,
USB_LINK_HOST_CHG_NM,
USB_LINK_HOST_CHG_HS,
USB_LINK_HOST_CHG_HS_CHIRP,
USB_LINK_DEDICATED_CHG,
USB_LINK_ACA_RID_A,
USB_LINK_ACA_RID_B,
USB_LINK_ACA_RID_C_NM,
USB_LINK_ACA_RID_C_HS,
USB_LINK_ACA_RID_C_HS_CHIRP,
USB_LINK_HM_IDGND,
USB_LINK_RESERVED,
USB_LINK_NOT_VALID_LINK
};
struct ab8500_usb {
struct usb_phy phy;
struct device *dev;
int irq_num_id_rise;
int irq_num_id_fall;
int irq_num_vbus_rise;
int irq_num_vbus_fall;
int irq_num_link_status;
unsigned vbus_draw;
struct delayed_work dwork;
struct work_struct phy_dis_work;
unsigned long link_status_wait;
int rev;
};
static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
{
return container_of(x, struct ab8500_usb, phy);
}
static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
{
abx500_set_register_interruptible(ab->dev,
AB8500_SYS_CTRL2_BLOCK,
AB8500_MAIN_WD_CTRL_REG,
AB8500_BIT_WD_CTRL_ENABLE);
udelay(AB8500_WD_KICK_DELAY_US);
abx500_set_register_interruptible(ab->dev,
AB8500_SYS_CTRL2_BLOCK,
AB8500_MAIN_WD_CTRL_REG,
(AB8500_BIT_WD_CTRL_ENABLE
| AB8500_BIT_WD_CTRL_KICK));
if (ab->rev > 0x10) /* v1.1 v2.0 */
udelay(AB8500_WD_V11_DISABLE_DELAY_US);
else /* v1.0 */
msleep(AB8500_WD_V10_DISABLE_DELAY_MS);
abx500_set_register_interruptible(ab->dev,
AB8500_SYS_CTRL2_BLOCK,
AB8500_MAIN_WD_CTRL_REG,
0);
}
static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host,
bool enable)
{
u8 ctrl_reg;
abx500_get_register_interruptible(ab->dev,
AB8500_USB,
AB8500_USB_PHY_CTRL_REG,
&ctrl_reg);
if (sel_host) {
if (enable)
ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN;
else
ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN;
} else {
if (enable)
ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN;
else
ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN;
}
abx500_set_register_interruptible(ab->dev,
AB8500_USB,
AB8500_USB_PHY_CTRL_REG,
ctrl_reg);
/* Needed to enable the phy.*/
if (enable)
ab8500_usb_wd_workaround(ab);
}
#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true)
#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false)
#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true)
#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false)
static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
{
u8 reg;
enum ab8500_usb_link_status lsts;
void *v = NULL;
enum usb_phy_events event;
abx500_get_register_interruptible(ab->dev,
AB8500_USB,
AB8500_USB_LINE_STAT_REG,
&reg);
lsts = (reg >> 3) & 0x0F;
switch (lsts) {
case USB_LINK_NOT_CONFIGURED:
case USB_LINK_RESERVED:
case USB_LINK_NOT_VALID_LINK:
/* TODO: Disable regulators. */
ab8500_usb_host_phy_dis(ab);
ab8500_usb_peri_phy_dis(ab);
ab->phy.state = OTG_STATE_B_IDLE;
ab->phy.otg->default_a = false;
ab->vbus_draw = 0;
event = USB_EVENT_NONE;
break;
case USB_LINK_STD_HOST_NC:
case USB_LINK_STD_HOST_C_NS:
case USB_LINK_STD_HOST_C_S:
case USB_LINK_HOST_CHG_NM:
case USB_LINK_HOST_CHG_HS:
case USB_LINK_HOST_CHG_HS_CHIRP:
if (ab->phy.otg->gadget) {
/* TODO: Enable regulators. */
ab8500_usb_peri_phy_en(ab);
v = ab->phy.otg->gadget;
}
event = USB_EVENT_VBUS;
break;
case USB_LINK_HM_IDGND:
if (ab->phy.otg->host) {
/* TODO: Enable regulators. */
ab8500_usb_host_phy_en(ab);
v = ab->phy.otg->host;
}
ab->phy.state = OTG_STATE_A_IDLE;
ab->phy.otg->default_a = true;
event = USB_EVENT_ID;
break;
case USB_LINK_ACA_RID_A:
case USB_LINK_ACA_RID_B:
/* TODO */
case USB_LINK_ACA_RID_C_NM:
case USB_LINK_ACA_RID_C_HS:
case USB_LINK_ACA_RID_C_HS_CHIRP:
case USB_LINK_DEDICATED_CHG:
/* TODO: vbus_draw */
event = USB_EVENT_CHARGER;
break;
}
atomic_notifier_call_chain(&ab->phy.notifier, event, v);
return 0;
}
static void ab8500_usb_delayed_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
dwork.work);
ab8500_usb_link_status_update(ab);
}
static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data)
{
struct ab8500_usb *ab = (struct ab8500_usb *) data;
/* Wait for link status to become stable. */
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
return IRQ_HANDLED;
}
static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data)
{
struct ab8500_usb *ab = (struct ab8500_usb *) data;
/* Link status will not be updated till phy is disabled. */
ab8500_usb_peri_phy_dis(ab);
/* Wait for link status to become stable. */
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
return IRQ_HANDLED;
}
static irqreturn_t ab8500_usb_v20_irq(int irq, void *data)
{
struct ab8500_usb *ab = (struct ab8500_usb *) data;
ab8500_usb_link_status_update(ab);
return IRQ_HANDLED;
}
static void ab8500_usb_phy_disable_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
phy_dis_work);
if (!ab->phy.otg->host)
ab8500_usb_host_phy_dis(ab);
if (!ab->phy.otg->gadget)
ab8500_usb_peri_phy_dis(ab);
}
static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
{
struct ab8500_usb *ab;
if (!phy)
return -ENODEV;
ab = phy_to_ab(phy);
ab->vbus_draw = mA;
if (mA)
atomic_notifier_call_chain(&ab->phy.notifier,
USB_EVENT_ENUMERATED, ab->phy.otg->gadget);
return 0;
}
/* TODO: Implement some way for charging or other drivers to read
* ab->vbus_draw.
*/
static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
{
/* TODO */
return 0;
}
static int ab8500_usb_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
struct ab8500_usb *ab;
if (!otg)
return -ENODEV;
ab = phy_to_ab(otg->phy);
/* Some drivers call this function in atomic context.
* Do not update ab8500 registers directly till this
* is fixed.
*/
if (!gadget) {
/* TODO: Disable regulators. */
otg->gadget = NULL;
schedule_work(&ab->phy_dis_work);
} else {
otg->gadget = gadget;
otg->phy->state = OTG_STATE_B_IDLE;
/* Phy will not be enabled if cable is already
* plugged-in. Schedule to enable phy.
* Use same delay to avoid any race condition.
*/
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
}
static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct ab8500_usb *ab;
if (!otg)
return -ENODEV;
ab = phy_to_ab(otg->phy);
/* Some drivers call this function in atomic context.
* Do not update ab8500 registers directly till this
* is fixed.
*/
if (!host) {
/* TODO: Disable regulators. */
otg->host = NULL;
schedule_work(&ab->phy_dis_work);
} else {
otg->host = host;
/* Phy will not be enabled if cable is already
* plugged-in. Schedule to enable phy.
* Use same delay to avoid any race condition.
*/
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
}
static void ab8500_usb_irq_free(struct ab8500_usb *ab)
{
if (ab->rev < 0x20) {
free_irq(ab->irq_num_id_rise, ab);
free_irq(ab->irq_num_id_fall, ab);
free_irq(ab->irq_num_vbus_rise, ab);
free_irq(ab->irq_num_vbus_fall, ab);
} else {
free_irq(ab->irq_num_link_status, ab);
}
}
static int ab8500_usb_v1x_res_setup(struct platform_device *pdev,
struct ab8500_usb *ab)
{
int err;
ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R");
if (ab->irq_num_id_rise < 0) {
dev_err(&pdev->dev, "ID rise irq not found\n");
return ab->irq_num_id_rise;
}
err = request_threaded_irq(ab->irq_num_id_rise, NULL,
ab8500_usb_v1x_common_irq,
IRQF_NO_SUSPEND | IRQF_SHARED,
"usb-id-rise", ab);
if (err < 0) {
dev_err(ab->dev, "request_irq failed for ID rise irq\n");
goto fail0;
}
ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
if (ab->irq_num_id_fall < 0) {
dev_err(&pdev->dev, "ID fall irq not found\n");
return ab->irq_num_id_fall;
}
err = request_threaded_irq(ab->irq_num_id_fall, NULL,
ab8500_usb_v1x_common_irq,
IRQF_NO_SUSPEND | IRQF_SHARED,
"usb-id-fall", ab);
if (err < 0) {
dev_err(ab->dev, "request_irq failed for ID fall irq\n");
goto fail1;
}
ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R");
if (ab->irq_num_vbus_rise < 0) {
dev_err(&pdev->dev, "VBUS rise irq not found\n");
return ab->irq_num_vbus_rise;
}
err = request_threaded_irq(ab->irq_num_vbus_rise, NULL,
ab8500_usb_v1x_common_irq,
IRQF_NO_SUSPEND | IRQF_SHARED,
"usb-vbus-rise", ab);
if (err < 0) {
dev_err(ab->dev, "request_irq failed for Vbus rise irq\n");
goto fail2;
}
ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F");
if (ab->irq_num_vbus_fall < 0) {
dev_err(&pdev->dev, "VBUS fall irq not found\n");
return ab->irq_num_vbus_fall;
}
err = request_threaded_irq(ab->irq_num_vbus_fall, NULL,
ab8500_usb_v1x_vbus_fall_irq,
IRQF_NO_SUSPEND | IRQF_SHARED,
"usb-vbus-fall", ab);
if (err < 0) {
dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
goto fail3;
}
return 0;
fail3:
free_irq(ab->irq_num_vbus_rise, ab);
fail2:
free_irq(ab->irq_num_id_fall, ab);
fail1:
free_irq(ab->irq_num_id_rise, ab);
fail0:
return err;
}
static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
struct ab8500_usb *ab)
{
int err;
ab->irq_num_link_status = platform_get_irq_byname(pdev,
"USB_LINK_STATUS");
if (ab->irq_num_link_status < 0) {
dev_err(&pdev->dev, "Link status irq not found\n");
return ab->irq_num_link_status;
}
err = request_threaded_irq(ab->irq_num_link_status, NULL,
ab8500_usb_v20_irq,
IRQF_NO_SUSPEND | IRQF_SHARED,
"usb-link-status", ab);
if (err < 0) {
dev_err(ab->dev,
"request_irq failed for link status irq\n");
return err;
}
return 0;
}
static int __devinit ab8500_usb_probe(struct platform_device *pdev)
{
struct ab8500_usb *ab;
struct usb_otg *otg;
int err;
int rev;
rev = abx500_get_chip_id(&pdev->dev);
if (rev < 0) {
dev_err(&pdev->dev, "Chip id read failed\n");
return rev;
} else if (rev < 0x10) {
dev_err(&pdev->dev, "Unsupported AB8500 chip\n");
return -ENODEV;
}
ab = kzalloc(sizeof *ab, GFP_KERNEL);
if (!ab)
return -ENOMEM;
otg = kzalloc(sizeof *otg, GFP_KERNEL);
if (!otg) {
kfree(ab);
return -ENOMEM;
}
ab->dev = &pdev->dev;
ab->rev = rev;
ab->phy.dev = ab->dev;
ab->phy.otg = otg;
ab->phy.label = "ab8500";
ab->phy.set_suspend = ab8500_usb_set_suspend;
ab->phy.set_power = ab8500_usb_set_power;
ab->phy.state = OTG_STATE_UNDEFINED;
otg->phy = &ab->phy;
otg->set_host = ab8500_usb_set_host;
otg->set_peripheral = ab8500_usb_set_peripheral;
platform_set_drvdata(pdev, ab);
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
/* v1: Wait for link status to become stable.
* all: Updates form set_host and set_peripheral as they are atomic.
*/
INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
if (ab->rev < 0x20) {
err = ab8500_usb_v1x_res_setup(pdev, ab);
ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT;
} else {
err = ab8500_usb_v2_res_setup(pdev, ab);
}
if (err < 0)
goto fail0;
err = usb_set_transceiver(&ab->phy);
if (err) {
dev_err(&pdev->dev, "Can't register transceiver\n");
goto fail1;
}
dev_info(&pdev->dev, "AB8500 usb driver initialized\n");
return 0;
fail1:
ab8500_usb_irq_free(ab);
fail0:
kfree(otg);
kfree(ab);
return err;
}
static int __devexit ab8500_usb_remove(struct platform_device *pdev)
{
struct ab8500_usb *ab = platform_get_drvdata(pdev);
ab8500_usb_irq_free(ab);
cancel_delayed_work_sync(&ab->dwork);
cancel_work_sync(&ab->phy_dis_work);
usb_set_transceiver(NULL);
ab8500_usb_host_phy_dis(ab);
ab8500_usb_peri_phy_dis(ab);
platform_set_drvdata(pdev, NULL);
kfree(ab->phy.otg);
kfree(ab);
return 0;
}
static struct platform_driver ab8500_usb_driver = {
.probe = ab8500_usb_probe,
.remove = __devexit_p(ab8500_usb_remove),
.driver = {
.name = "ab8500-usb",
.owner = THIS_MODULE,
},
};
static int __init ab8500_usb_init(void)
{
return platform_driver_register(&ab8500_usb_driver);
}
subsys_initcall(ab8500_usb_init);
static void __exit ab8500_usb_exit(void)
{
platform_driver_unregister(&ab8500_usb_driver);
}
module_exit(ab8500_usb_exit);
MODULE_ALIAS("platform:ab8500_usb");
MODULE_AUTHOR("ST-Ericsson AB");
MODULE_DESCRIPTION("AB8500 usb transceiver driver");
MODULE_LICENSE("GPL");