linux/Documentation/devicetree/bindings/hwmon/lm90.txt

52 lines
1.2 KiB
Plaintext

* LM90 series thermometer.
Required node properties:
- compatible: manufacturer and chip name, one of
"adi,adm1032"
"adi,adt7461"
"adi,adt7461a"
"gmt,g781"
"national,lm90"
"national,lm86"
"national,lm89"
"national,lm99"
"dallas,max6646"
"dallas,max6647"
"dallas,max6649"
"dallas,max6657"
"dallas,max6658"
"dallas,max6659"
"dallas,max6680"
"dallas,max6681"
"dallas,max6695"
"dallas,max6696"
"onnn,nct1008"
"winbond,w83l771"
"nxp,sa56004"
"ti,tmp451"
- reg: I2C bus address of the device
- vcc-supply: vcc regulator for the supply voltage.
Optional properties:
- interrupts: Contains a single interrupt specifier which describes the
LM90 "-ALERT" pin output.
See interrupt-controller/interrupts.txt for the format.
- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for
details. See <include/dt-bindings/thermal/lm90.h> for the
definition of the local, remote and 2nd remote sensor index
constants.
Example LM90 node:
temp-sensor {
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&palmas_ldo6_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
}