linux/arch/mips/sni/a20r.c

228 lines
4.5 KiB
C

/*
* A20R specific code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/sni.h>
#include <asm/time.h>
#include <asm/ds1216.h>
#define PORT(_base,_irq) \
{ \
.iobase = _base, \
.irq = _irq, \
.uartclk = 1843200, \
.iotype = UPIO_PORT, \
.flags = UPF_BOOT_AUTOCONF, \
}
static struct plat_serial8250_port a20r_data[] = {
PORT(0x3f8, 4),
PORT(0x2f8, 3),
{ },
};
static struct platform_device a20r_serial8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = a20r_data,
},
};
static struct resource snirm_82596_rsrc[] = {
{
.start = 0xb8000000,
.end = 0xb8000004,
.flags = IORESOURCE_MEM
},
{
.start = 0xb8010000,
.end = 0xb8010004,
.flags = IORESOURCE_MEM
},
{
.start = 0xbff00000,
.end = 0xbff00020,
.flags = IORESOURCE_MEM
},
{
.start = 22,
.end = 22,
.flags = IORESOURCE_IRQ
},
{
.flags = 0x01 /* 16bit mpu port access */
}
};
static struct platform_device snirm_82596_pdev = {
.name = "snirm_82596",
.num_resources = ARRAY_SIZE(snirm_82596_rsrc),
.resource = snirm_82596_rsrc
};
static struct resource snirm_53c710_rsrc[] = {
{
.start = 0xb9000000,
.end = 0xb90fffff,
.flags = IORESOURCE_MEM
},
{
.start = 19,
.end = 19,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device snirm_53c710_pdev = {
.name = "snirm_53c710",
.num_resources = ARRAY_SIZE(snirm_53c710_rsrc),
.resource = snirm_53c710_rsrc
};
static struct resource sc26xx_rsrc[] = {
{
.start = 0xbc070000,
.end = 0xbc0700ff,
.flags = IORESOURCE_MEM
},
{
.start = 20,
.end = 20,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device sc26xx_pdev = {
.name = "SC26xx",
.num_resources = ARRAY_SIZE(sc26xx_rsrc),
.resource = sc26xx_rsrc
};
static u32 a20r_ack_hwint(void)
{
u32 status = read_c0_status();
write_c0_status (status | 0x00010000);
asm volatile(
" .set push \n"
" .set noat \n"
" .set noreorder \n"
" lw $1, 0(%0) \n"
" sb $0, 0(%1) \n"
" sync \n"
" lb %1, 0(%1) \n"
" b 1f \n"
" ori %1, $1, 2 \n"
" .align 8 \n"
"1: \n"
" nop \n"
" sw %1, 0(%0) \n"
" sync \n"
" li %1, 0x20 \n"
"2: \n"
" nop \n"
" bnez %1,2b \n"
" addiu %1, -1 \n"
" sw $1, 0(%0) \n"
" sync \n"
".set pop \n"
:
: "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
write_c0_status(status);
return status;
}
static inline void unmask_a20r_irq(unsigned int irq)
{
set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_a20r_irq(unsigned int irq)
{
clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
irq_disable_hazard();
}
static void end_a20r_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
a20r_ack_hwint();
unmask_a20r_irq(irq);
}
}
static struct irq_chip a20r_irq_type = {
.typename = "A20R",
.ack = mask_a20r_irq,
.mask = mask_a20r_irq,
.mask_ack = mask_a20r_irq,
.unmask = unmask_a20r_irq,
.end = end_a20r_irq,
};
/*
* hwint 0 receive all interrupts
*/
static void a20r_hwint(void)
{
u32 cause, status;
int irq;
clear_c0_status (IE_IRQ0);
status = a20r_ack_hwint();
cause = read_c0_cause();
irq = ffs(((cause & status) >> 8) & 0xf8);
if (likely(irq > 0))
do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
set_c0_status(IE_IRQ0);
}
void __init sni_a20r_irq_init(void)
{
int i;
for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
set_irq_chip(i, &a20r_irq_type);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq (SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
}
void sni_a20r_init(void)
{
ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE;
rtc_mips_get_time = ds1216_get_cmos_time;
}
static int __init snirm_a20r_setup_devinit(void)
{
switch (sni_brd_type) {
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
platform_device_register(&snirm_82596_pdev);
platform_device_register(&snirm_53c710_pdev);
platform_device_register(&sc26xx_pdev);
platform_device_register(&a20r_serial8250_device);
break;
}
return 0;
}
device_initcall(snirm_a20r_setup_devinit);