linux/drivers/lightnvm/pblk-rl.c
Javier González a44f53faf4 lightnvm: pblk: fix erase counters on error fail
When block erases fail, these blocks are marked bad. The number of valid
blocks in the line was not updated, which could cause an infinite loop
on the erase path.

Fix this atomic counter and, in order to avoid taking an irq lock on the
interrupt context, make the erase counters atomic too.

Also, in the case that a significant number of blocks become bad in a
line, the result is the double shared metadata buffer (emeta) to stop
the pipeline until all metadata is flushed to the media. Increase the
number of metadata lines from 2 to 4 to avoid this case.

Fixes: a4bd217b43 "lightnvm: physical block device (pblk) target"

Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23 16:57:52 -06:00

185 lines
4.8 KiB
C

/*
* Copyright (C) 2016 CNEX Labs
* Initial release: Javier Gonzalez <javier@cnexlabs.com>
* Matias Bjorling <matias@cnexlabs.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* pblk-rl.c - pblk's rate limiter for user I/O
*
*/
#include "pblk.h"
static void pblk_rl_kick_u_timer(struct pblk_rl *rl)
{
mod_timer(&rl->u_timer, jiffies + msecs_to_jiffies(5000));
}
int pblk_rl_user_may_insert(struct pblk_rl *rl, int nr_entries)
{
int rb_user_cnt = atomic_read(&rl->rb_user_cnt);
return (!(rb_user_cnt + nr_entries > rl->rb_user_max));
}
int pblk_rl_gc_may_insert(struct pblk_rl *rl, int nr_entries)
{
int rb_gc_cnt = atomic_read(&rl->rb_gc_cnt);
int rb_user_active;
/* If there is no user I/O let GC take over space on the write buffer */
rb_user_active = READ_ONCE(rl->rb_user_active);
return (!(rb_gc_cnt + nr_entries > rl->rb_gc_max && rb_user_active));
}
void pblk_rl_user_in(struct pblk_rl *rl, int nr_entries)
{
atomic_add(nr_entries, &rl->rb_user_cnt);
/* Release user I/O state. Protect from GC */
smp_store_release(&rl->rb_user_active, 1);
pblk_rl_kick_u_timer(rl);
}
void pblk_rl_gc_in(struct pblk_rl *rl, int nr_entries)
{
atomic_add(nr_entries, &rl->rb_gc_cnt);
}
void pblk_rl_out(struct pblk_rl *rl, int nr_user, int nr_gc)
{
atomic_sub(nr_user, &rl->rb_user_cnt);
atomic_sub(nr_gc, &rl->rb_gc_cnt);
}
unsigned long pblk_rl_nr_free_blks(struct pblk_rl *rl)
{
return atomic_read(&rl->free_blocks);
}
/*
* We check for (i) the number of free blocks in the current LUN and (ii) the
* total number of free blocks in the pblk instance. This is to even out the
* number of free blocks on each LUN when GC kicks in.
*
* Only the total number of free blocks is used to configure the rate limiter.
*/
static int pblk_rl_update_rates(struct pblk_rl *rl, unsigned long max)
{
unsigned long free_blocks = pblk_rl_nr_free_blks(rl);
if (free_blocks >= rl->high) {
rl->rb_user_max = max - rl->rb_gc_rsv;
rl->rb_gc_max = rl->rb_gc_rsv;
rl->rb_state = PBLK_RL_HIGH;
} else if (free_blocks < rl->high) {
int shift = rl->high_pw - rl->rb_windows_pw;
int user_windows = free_blocks >> shift;
int user_max = user_windows << PBLK_MAX_REQ_ADDRS_PW;
int gc_max;
rl->rb_user_max = user_max;
gc_max = max - rl->rb_user_max;
rl->rb_gc_max = max(gc_max, rl->rb_gc_rsv);
if (free_blocks > rl->low)
rl->rb_state = PBLK_RL_MID;
else
rl->rb_state = PBLK_RL_LOW;
}
return rl->rb_state;
}
void pblk_rl_set_gc_rsc(struct pblk_rl *rl, int rsv)
{
rl->rb_gc_rsv = rl->rb_gc_max = rsv;
}
void pblk_rl_free_lines_inc(struct pblk_rl *rl, struct pblk_line *line)
{
struct pblk *pblk = container_of(rl, struct pblk, rl);
int blk_in_line = atomic_read(&line->blk_in_line);
int ret;
atomic_add(blk_in_line, &rl->free_blocks);
/* Rates will not change that often - no need to lock update */
ret = pblk_rl_update_rates(rl, rl->rb_budget);
if (ret == (PBLK_RL_MID | PBLK_RL_LOW))
pblk_gc_should_start(pblk);
else
pblk_gc_should_stop(pblk);
}
void pblk_rl_free_lines_dec(struct pblk_rl *rl, struct pblk_line *line)
{
struct pblk *pblk = container_of(rl, struct pblk, rl);
int blk_in_line = atomic_read(&line->blk_in_line);
int ret;
atomic_sub(blk_in_line, &rl->free_blocks);
/* Rates will not change that often - no need to lock update */
ret = pblk_rl_update_rates(rl, rl->rb_budget);
if (ret == (PBLK_RL_MID | PBLK_RL_LOW))
pblk_gc_should_start(pblk);
else
pblk_gc_should_stop(pblk);
}
int pblk_rl_gc_thrs(struct pblk_rl *rl)
{
return rl->high;
}
int pblk_rl_sysfs_rate_show(struct pblk_rl *rl)
{
return rl->rb_user_max;
}
static void pblk_rl_u_timer(unsigned long data)
{
struct pblk_rl *rl = (struct pblk_rl *)data;
/* Release user I/O state. Protect from GC */
smp_store_release(&rl->rb_user_active, 0);
}
void pblk_rl_free(struct pblk_rl *rl)
{
del_timer(&rl->u_timer);
}
void pblk_rl_init(struct pblk_rl *rl, int budget)
{
unsigned int rb_windows;
rl->high = rl->total_blocks / PBLK_USER_HIGH_THRS;
rl->low = rl->total_blocks / PBLK_USER_LOW_THRS;
rl->high_pw = get_count_order(rl->high);
/* This will always be a power-of-2 */
rb_windows = budget / PBLK_MAX_REQ_ADDRS;
rl->rb_windows_pw = get_count_order(rb_windows) + 1;
/* To start with, all buffer is available to user I/O writers */
rl->rb_budget = budget;
rl->rb_user_max = budget;
atomic_set(&rl->rb_user_cnt, 0);
rl->rb_gc_max = 0;
rl->rb_state = PBLK_RL_HIGH;
atomic_set(&rl->rb_gc_cnt, 0);
setup_timer(&rl->u_timer, pblk_rl_u_timer, (unsigned long)rl);
rl->rb_user_active = 0;
}