OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
648,381 Commits 4 Branches 0 Tags 2 GiB
C 97.7%
Assembly 1.3%
Makefile 0.4%
Shell 0.3%
Python 0.1%
Other 0.1%
Go to file
Davidlohr Bueso 642fa448ae sched/core: Remove set_task_state() 
This is a nasty interface and setting the state of a foreign task must
not be done. As of the following commit:

  be628be095 ("bcache: Make gc wakeup sane, remove set_task_state()")

... everyone in the kernel calls set_task_state() with current, allowing
the helper to be removed.

However, as the comment indicates, it is still around for those archs
where computing current is more expensive than using a pointer, at least
in theory. An important arch that is affected is arm64, however this has
been addressed now [1] and performance is up to par making no difference
with either calls.

Of all the callers, if any, it's the locking bits that would care most
about this -- ie: we end up passing a tsk pointer to a lot of the lock
slowpath, and setting ->state on that. The following numbers are based
on two tests: a custom ad-hoc microbenchmark that just measures
latencies (for ~65 million calls) between get_task_state() vs
get_current_state().

Secondly for a higher overview, an unlink microbenchmark was used,
which pounds on a single file with open, close,unlink combos with
increasing thread counts (up to 4x ncpus). While the workload is quite
unrealistic, it does contend a lot on the inode mutex or now rwsem.

[1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)

x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching)
and ppc64 (with paca) show similar improvements in the unlink microbenches.
The small delta for ppc64 (2ms), does not represent the gains on the unlink
runs. In the case of x86, there was a decent amount of variation in the
latency runs, but always within a 20 to 50ms increase), ppc was more constant.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 		2017-01-14 11:14:16 +01:00
Documentation mm: add documentation for page fragment APIs 2017-01-10 18:31:55 -08:00
arch sched/core: Remove set_task_state() 2017-01-14 11:14:16 +01:00
block Merge branch 'for-linus' of git://git.kernel.dk/linux-block 2017-01-04 09:03:37 -08:00
certs certs: Add a secondary system keyring that can be added to dynamically 2016-04-11 22:48:09 +01:00
crypto crypto: testmgr - Use heap buffer for acomp test input 2016-12-27 17:32:11 +08:00
drivers sched/core: Remove set_task_state() 2017-01-14 11:14:16 +01:00
firmware WHENCE: use https://linuxtv.org for LinuxTV URLs 2015-12-04 10:35:11 -02:00
fs ocfs2: fix crash caused by stale lvb with fsdlm plugin 2017-01-10 18:31:54 -08:00
include sched/core: Remove set_task_state() 2017-01-14 11:14:16 +01:00
init cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig 2017-01-11 09:47:10 -05:00
ipc ipc/sem.c: fix incorrect sem_lock pairing 2017-01-10 18:31:55 -08:00
kernel sched/core: Remove set_task_state() 2017-01-14 11:14:16 +01:00
lib lib/Kconfig.debug: fix frv build failure 2017-01-10 18:31:55 -08:00
mm mm/hugetlb.c: fix reservation race when freeing surplus pages 2017-01-10 18:31:55 -08:00
net Merge branch 'akpm' (patches from Andrew) 2017-01-11 11:15:15 -08:00
samples vfio-mdev: fix some error codes in the sample code 2017-01-04 08:32:23 -07:00
scripts gcc-plugins: update gcc-common.h for gcc-7 2017-01-03 12:08:59 -08:00
security Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
sound Revert "ALSA: firewire-lib: change structure member with proper type" 2017-01-05 08:39:47 +01:00
tools Merge branch 'akpm' (patches from Andrew) 2017-01-11 11:15:15 -08:00
usr kbuild: initramfs cleanup, set target from Kconfig 2017-01-05 09:40:16 -08:00
virt Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-12-25 14:30:04 -08:00
.cocciconfig scripts: add Linux .cocciconfig for coccinelle 2016-07-22 12:13:39 +02:00
.get_maintainer.ignore
…
.gitattributes .gitattributes: set git diff driver for C source code files 2016-10-07 18:46:30 -07:00
.gitignore Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild 2016-08-02 16:48:52 -04:00
.mailmap mailmap: add codeaurora.org names for nameless email commits 2017-01-10 18:31:55 -08:00
COPYING
…
CREDITS CREDITS: Remove outdated address information 2016-12-21 15:21:29 -08:00
Kbuild scripts/gdb: provide linux constants 2016-05-23 17:04:14 -07:00
Kconfig
…
MAINTAINERS MAINTAINERS: remove duplicate bug filling description 2017-01-10 18:31:54 -08:00
Makefile Linux 4.10-rc3 2017-01-08 14:18:17 -08:00
README README: add a new README file, pointing to the Documentation/ 2016-10-24 08:12:35 -02:00

README 

Linux kernel
============

This file was moved to Documentation/admin-guide/README.rst

Please notice that there are several guides for kernel developers and users.
These guides can be rendered in a number of formats, like HTML and PDF.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
See Documentation/00-INDEX for a list of what is contained in each file.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.