linux/drivers/clocksource/clksrc_st_lpc.c

136 lines
3.0 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Clocksource using the Low Power Timer found in the Low Power Controller (LPC)
*
* Copyright (C) 2015 STMicroelectronics All Rights Reserved
*
* Author(s): Francesco Virlinzi <francesco.virlinzi@st.com>
* Ajit Pal Singh <ajitpal.singh@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/sched_clock.h>
#include <linux/slab.h>
#include <dt-bindings/mfd/st-lpc.h>
/* Low Power Timer */
#define LPC_LPT_LSB_OFF 0x400
#define LPC_LPT_MSB_OFF 0x404
#define LPC_LPT_START_OFF 0x408
static struct st_clksrc_ddata {
struct clk *clk;
void __iomem *base;
} ddata;
static void __init st_clksrc_reset(void)
{
writel_relaxed(0, ddata.base + LPC_LPT_START_OFF);
writel_relaxed(0, ddata.base + LPC_LPT_MSB_OFF);
writel_relaxed(0, ddata.base + LPC_LPT_LSB_OFF);
writel_relaxed(1, ddata.base + LPC_LPT_START_OFF);
}
static u64 notrace st_clksrc_sched_clock_read(void)
{
return (u64)readl_relaxed(ddata.base + LPC_LPT_LSB_OFF);
}
static int __init st_clksrc_init(void)
{
unsigned long rate;
int ret;
st_clksrc_reset();
rate = clk_get_rate(ddata.clk);
sched_clock_register(st_clksrc_sched_clock_read, 32, rate);
ret = clocksource_mmio_init(ddata.base + LPC_LPT_LSB_OFF,
"clksrc-st-lpc", rate, 300, 32,
clocksource_mmio_readl_up);
if (ret) {
pr_err("clksrc-st-lpc: Failed to register clocksource\n");
return ret;
}
return 0;
}
static int __init st_clksrc_setup_clk(struct device_node *np)
{
struct clk *clk;
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("clksrc-st-lpc: Failed to get LPC clock\n");
return PTR_ERR(clk);
}
if (clk_prepare_enable(clk)) {
pr_err("clksrc-st-lpc: Failed to enable LPC clock\n");
return -EINVAL;
}
if (!clk_get_rate(clk)) {
pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n");
clk_disable_unprepare(clk);
return -EINVAL;
}
ddata.clk = clk;
return 0;
}
static int __init st_clksrc_of_register(struct device_node *np)
{
int ret;
uint32_t mode;
ret = of_property_read_u32(np, "st,lpc-mode", &mode);
if (ret) {
pr_err("clksrc-st-lpc: An LPC mode must be provided\n");
return ret;
}
/* LPC can either run as a Clocksource or in RTC or WDT mode */
if (mode != ST_LPC_MODE_CLKSRC)
return 0;
ddata.base = of_iomap(np, 0);
if (!ddata.base) {
pr_err("clksrc-st-lpc: Unable to map iomem\n");
return -ENXIO;
}
ret = st_clksrc_setup_clk(np);
if (ret) {
iounmap(ddata.base);
return ret;
}
ret = st_clksrc_init();
if (ret) {
clk_disable_unprepare(ddata.clk);
clk_put(ddata.clk);
iounmap(ddata.base);
return ret;
}
pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n",
clk_get_rate(ddata.clk));
return ret;
}
TIMER_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);