Go to file
Song Liu 6987561c9e perf annotate: Enable annotation of BPF programs
In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into
a new function symbol__disassemble_bpf(), where annotation line
information is filled based on the bpf_prog_info and btf data saved in
given perf_env.

symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf
programs.

Committer testing:

After fixing this:

  -               u64 *addrs = (u64 *)(info_linear->info.jited_ksyms);
  +               u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms);

Detected when crossbuilding to a 32-bit arch.

And making all this dependent on HAVE_LIBBFD_SUPPORT and
HAVE_LIBBPF_SUPPORT:

1) Have a BPF program running, one that has BTF info, etc, I used
   the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place
   by 'perf trace'.

  # grep -B1 augmented_raw ~/.perfconfig
  [trace]
	add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
  #
  # perf trace -e *mmsg
  dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2
  NetworkManager/10055 sendmmsg(22<socket:[1056822]>, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2

2) Then do a 'perf record' system wide for a while:

  # perf record -a
  ^C[ perf record: Woken up 68 times to write data ]
  [ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ]
  #

3) Check that we captured BPF and BTF info in the perf.data file:

  # perf report --header-only | grep 'b[pt]f'
  # event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 41
  # bpf_prog_info of id 42
  # btf info of id 2
  #

4) Check which programs got recorded:

   # perf report | grep bpf_prog | head
     0.16%  exe              bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.14%  exe              bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.08%  fuse-overlayfs   bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.07%  fuse-overlayfs   bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.00%  runc             bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  sh               bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

  This was with the default --sort order for 'perf report', which is:

    --sort comm,dso,symbol

  If we just look for the symbol, for instance:

   # perf report --sort symbol | grep bpf_prog | head
     0.26%  [k] bpf_prog_819967866022f1e1_sys_enter                -      -
     0.24%  [k] bpf_prog_c1bd85c092d6e4aa_sys_exit                 -      -
   #

  or the DSO:

   # perf report --sort dso | grep bpf_prog | head
     0.26%  bpf_prog_819967866022f1e1_sys_enter
     0.24%  bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

We'll see the two BPF programs that augmented_raw_syscalls.o puts in
place,  one attached to the raw_syscalls:sys_enter and another to the
raw_syscalls:sys_exit tracepoints, as expected.

Now we can finally do, from the command line, annotation for one of
those two symbols, with the original BPF program source coude intermixed
with the disassembled JITed code:

  # perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter

  Samples: 950  of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period]
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Percent      int sys_enter(struct syscall_enter_args *args)
   53.41         push   %rbp

    0.63         mov    %rsp,%rbp
    0.31         sub    $0x170,%rsp
    1.93         sub    $0x28,%rbp
    7.02         mov    %rbx,0x0(%rbp)
    3.20         mov    %r13,0x8(%rbp)
    1.07         mov    %r14,0x10(%rbp)
    0.61         mov    %r15,0x18(%rbp)
    0.11         xor    %eax,%eax
    1.29         mov    %rax,0x20(%rbp)
    0.11         mov    %rdi,%rbx
               	return bpf_get_current_pid_tgid();
    2.02       → callq  *ffffffffda6776d9
    2.76         mov    %eax,-0x148(%rbp)
                 mov    %rbp,%rsi
               int sys_enter(struct syscall_enter_args *args)
                 add    $0xfffffffffffffeb8,%rsi
               	return bpf_map_lookup_elem(pids, &pid) != NULL;
                 movabs $0xffff975ac2607800,%rdi

    1.26       → callq  *ffffffffda6789e9
                 cmp    $0x0,%rax
    2.43       → je     0
                 add    $0x38,%rax
    0.21         xor    %r13d,%r13d
               	if (pid_filter__has(&pids_filtered, getpid()))
    0.81         cmp    $0x0,%rax
               → jne    0
                 mov    %rbp,%rdi
               	probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
    2.22         add    $0xfffffffffffffeb8,%rdi
    0.11         mov    $0x40,%esi
    0.32         mov    %rbx,%rdx
    2.74       → callq  *ffffffffda658409
               	syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
    0.22         mov    %rbp,%rsi
    1.69         add    $0xfffffffffffffec0,%rsi
               	syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
                 movabs $0xffff975bfcd36000,%rdi

                 add    $0xd0,%rdi
    0.21         mov    0x0(%rsi),%eax
    0.93         cmp    $0x200,%rax
               → jae    0
    0.10         shl    $0x3,%rax

    0.11         add    %rdi,%rax
    0.11       → jmp    0
                 xor    %eax,%eax
               	if (syscall == NULL || !syscall->enabled)
    1.07         cmp    $0x0,%rax
               → je     0
               	if (syscall == NULL || !syscall->enabled)
    6.57         movzbq 0x0(%rax),%rdi

               	if (syscall == NULL || !syscall->enabled)
                 cmp    $0x0,%rdi
    0.95       → je     0
                 mov    $0x40,%r8d
               	switch (augmented_args.args.syscall_nr) {
                 mov    -0x140(%rbp),%rdi
               	switch (augmented_args.args.syscall_nr) {
                 cmp    $0x2,%rdi
               → je     0
                 cmp    $0x101,%rdi
               → je     0
                 cmp    $0x15,%rdi
               → jne    0
               	case SYS_OPEN:	 filename_arg = (const void *)args->args[0];
                 mov    0x10(%rbx),%rdx
               → jmp    0
               	case SYS_OPENAT: filename_arg = (const void *)args->args[1];
                 mov    0x18(%rbx),%rdx
               	if (filename_arg != NULL) {
                 cmp    $0x0,%rdx
               → je     0
                 xor    %edi,%edi
               		augmented_args.filename.reserved = 0;
                 mov    %edi,-0x104(%rbp)
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rbp,%rdi
                 add    $0xffffffffffffff00,%rdi
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    $0x100,%esi
               → callq  *ffffffffda658499
                 mov    $0x148,%r8d
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %eax,-0x108(%rbp)
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rax,%rdi
                 shl    $0x20,%rdi

                 shr    $0x20,%rdi

               		if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) {
                 cmp    $0xff,%rdi
               → ja     0
               			len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size;
                 add    $0x48,%rax
               			len &= sizeof(augmented_args.filename.value) - 1;
                 and    $0xff,%rax
                 mov    %rax,%r8
                 mov    %rbp,%rcx
               	return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len);
                 add    $0xfffffffffffffeb8,%rcx
                 mov    %rbx,%rdi
                 movabs $0xffff975fbd72d800,%rsi

                 mov    $0xffffffff,%edx
               → callq  *ffffffffda658ad9
                 mov    %rax,%r13
               }
                 mov    %r13,%rax
    0.72         mov    0x0(%rbp),%rbx
                 mov    0x8(%rbp),%r13
    1.16         mov    0x10(%rbp),%r14
    0.10         mov    0x18(%rbp),%r15
    0.42         add    $0x28,%rbp
    0.54         leaveq
    0.54       ← retq
  #

Please see 'man perf-config' to see how to control what should be seen,
via ~/.perfconfig [annotate] section, for instance, one can suppress the
source code and see just the disassembly, etc.

Alternatively, use the TUI bu just using 'perf annotate', press
'/bpf_prog' to see the bpf symbols, press enter and do the interactive
annotation, which allows for dumping to a file after selecting the
the various output tunables, for instance, the above without source code
intermixed, plus showing all the instruction offsets:

  # perf annotate bpf_prog_819967866022f1e1_sys_enter

Then press: 's' to hide the source code + 'O' twice to show all
instruction offsets, then 'P' to print to the
bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have:

  # cat bpf_prog_819967866022f1e1_sys_enter.annotation
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Event: cycles:ppp

   53.41    0:   push   %rbp

    0.63    1:   mov    %rsp,%rbp
    0.31    4:   sub    $0x170,%rsp
    1.93    b:   sub    $0x28,%rbp
    7.02    f:   mov    %rbx,0x0(%rbp)
    3.20   13:   mov    %r13,0x8(%rbp)
    1.07   17:   mov    %r14,0x10(%rbp)
    0.61   1b:   mov    %r15,0x18(%rbp)
    0.11   1f:   xor    %eax,%eax
    1.29   21:   mov    %rax,0x20(%rbp)
    0.11   25:   mov    %rdi,%rbx
    2.02   28: → callq  *ffffffffda6776d9
    2.76   2d:   mov    %eax,-0x148(%rbp)
           33:   mov    %rbp,%rsi
           36:   add    $0xfffffffffffffeb8,%rsi
           3d:   movabs $0xffff975ac2607800,%rdi

    1.26   47: → callq  *ffffffffda6789e9
           4c:   cmp    $0x0,%rax
    2.43   50: → je     0
           52:   add    $0x38,%rax
    0.21   56:   xor    %r13d,%r13d
    0.81   59:   cmp    $0x0,%rax
           5d: → jne    0
           63:   mov    %rbp,%rdi
    2.22   66:   add    $0xfffffffffffffeb8,%rdi
    0.11   6d:   mov    $0x40,%esi
    0.32   72:   mov    %rbx,%rdx
    2.74   75: → callq  *ffffffffda658409
    0.22   7a:   mov    %rbp,%rsi
    1.69   7d:   add    $0xfffffffffffffec0,%rsi
           84:   movabs $0xffff975bfcd36000,%rdi

           8e:   add    $0xd0,%rdi
    0.21   95:   mov    0x0(%rsi),%eax
    0.93   98:   cmp    $0x200,%rax
           9f: → jae    0
    0.10   a1:   shl    $0x3,%rax

    0.11   a5:   add    %rdi,%rax
    0.11   a8: → jmp    0
           aa:   xor    %eax,%eax
    1.07   ac:   cmp    $0x0,%rax
           b0: → je     0
    6.57   b6:   movzbq 0x0(%rax),%rdi

           bb:   cmp    $0x0,%rdi
    0.95   bf: → je     0
           c5:   mov    $0x40,%r8d
           cb:   mov    -0x140(%rbp),%rdi
           d2:   cmp    $0x2,%rdi
           d6: → je     0
           d8:   cmp    $0x101,%rdi
           df: → je     0
           e1:   cmp    $0x15,%rdi
           e5: → jne    0
           e7:   mov    0x10(%rbx),%rdx
           eb: → jmp    0
           ed:   mov    0x18(%rbx),%rdx
           f1:   cmp    $0x0,%rdx
           f5: → je     0
           f7:   xor    %edi,%edi
           f9:   mov    %edi,-0x104(%rbp)
           ff:   mov    %rbp,%rdi
          102:   add    $0xffffffffffffff00,%rdi
          109:   mov    $0x100,%esi
          10e: → callq  *ffffffffda658499
          113:   mov    $0x148,%r8d
          119:   mov    %eax,-0x108(%rbp)
          11f:   mov    %rax,%rdi
          122:   shl    $0x20,%rdi

          126:   shr    $0x20,%rdi

          12a:   cmp    $0xff,%rdi
          131: → ja     0
          133:   add    $0x48,%rax
          137:   and    $0xff,%rax
          13d:   mov    %rax,%r8
          140:   mov    %rbp,%rcx
          143:   add    $0xfffffffffffffeb8,%rcx
          14a:   mov    %rbx,%rdi
          14d:   movabs $0xffff975fbd72d800,%rsi

          157:   mov    $0xffffffff,%edx
          15c: → callq  *ffffffffda658ad9
          161:   mov    %rax,%r13
          164:   mov    %r13,%rax
    0.72  167:   mov    0x0(%rbp),%rbx
          16b:   mov    0x8(%rbp),%r13
    1.16  16f:   mov    0x10(%rbp),%r14
    0.10  173:   mov    0x18(%rbp),%r15
    0.42  177:   add    $0x28,%rbp
    0.54  17b:   leaveq
    0.54  17c: ← retq

Another cool way to test all this is to symple use 'perf top' look for
those symbols, go there and press enter, annotate it live :-)

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-20 16:43:15 -03:00
Documentation Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 08:14:05 -08:00
LICENSES This is a fairly typical cycle for documentation. There's some welcome 2018-10-24 18:01:11 +01:00
arch perf/x86/intel/uncore: Fix client IMC events return huge result 2019-03-09 14:10:31 +01:00
block for-linus-20190215 2019-02-15 09:12:28 -08:00
certs kbuild: remove redundant target cleaning on failure 2019-01-06 09:46:51 +09:00
crypto Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2019-03-05 09:09:55 -08:00
drivers Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 07:59:36 -08:00
firmware kbuild: change filechk to surround the given command with { } 2019-01-06 09:46:51 +09:00
fs Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 08:14:05 -08:00
include Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 08:14:05 -08:00
init Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 08:14:05 -08:00
ipc y2038: syscalls: rename y2038 compat syscalls 2019-02-07 00:13:27 +01:00
kernel perf/core: Restore mmap record type correctly 2019-03-11 11:56:02 -03:00
lib Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 07:59:36 -08:00
mm Merge branch 'akpm' (patches from Andrew) 2019-03-01 09:04:59 -08:00
net Merge branch 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-05 14:08:26 -08:00
samples Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2019-03-05 08:26:13 -08:00
scripts Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 07:17:17 -08:00
security get rid of legacy 'get_ds()' function 2019-03-04 10:50:14 -08:00
sound sound fixes for 5.0 2019-02-20 09:42:52 -08:00
tools perf annotate: Enable annotation of BPF programs 2019-03-20 16:43:15 -03:00
usr user/Makefile: Fix typo and capitalization in comment section 2018-12-11 00:18:03 +09:00
virt Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-05 14:49:11 -08:00
.clang-format clang-format: Update .clang-format with the latest for_each macro list 2019-01-19 19:26:06 +01:00
.cocciconfig scripts: add Linux .cocciconfig for coccinelle 2016-07-22 12:13:39 +02:00
.get_maintainer.ignore
.gitattributes .gitattributes: set git diff driver for C source code files 2016-10-07 18:46:30 -07:00
.gitignore kbuild: Add support for DT binding schema checks 2018-12-13 09:41:32 -06:00
.mailmap .mailmap: Add Mathieu Othacehe 2019-02-21 11:41:19 +00:00
COPYING COPYING: use the new text with points to the license files 2018-03-23 12:41:45 -06:00
CREDITS CREDITS/MAINTAINERS: Retire parisc-linux.org email domain 2019-02-21 20:16:10 +01:00
Kbuild Merge branch 'locking/atomics' into locking/core, to pick up WIP commits 2019-02-11 14:27:05 +01:00
Kconfig kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt 2018-08-02 08:06:55 +09:00
MAINTAINERS Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-03-06 08:14:05 -08:00
Makefile Linux 5.0 2019-03-03 15:21:29 -08:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.