linux/arch/sparc/kernel/trampoline.S

163 lines
3.1 KiB
ArmAsm

/* $Id: trampoline.S,v 1.14 2002/01/11 08:45:38 davem Exp $
* trampoline.S: SMP cpu boot-up trampoline code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/init.h>
#include <asm/head.h>
#include <asm/psr.h>
#include <asm/page.h>
#include <asm/asi.h>
#include <asm/ptrace.h>
#include <asm/vaddrs.h>
#include <asm/contregs.h>
#include <asm/thread_info.h>
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
__INIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
* This initializes the chip from whatever state the prom left it
* in and sets PIL in %psr to 15, no irqs.
*/
sun4m_cpu_startup:
cpu1_startup:
sethi %hi(trapbase_cpu1), %g3
b 1f
or %g3, %lo(trapbase_cpu1), %g3
cpu2_startup:
sethi %hi(trapbase_cpu2), %g3
b 1f
or %g3, %lo(trapbase_cpu2), %g3
cpu3_startup:
sethi %hi(trapbase_cpu3), %g3
b 1f
or %g3, %lo(trapbase_cpu3), %g3
1:
/* Set up a sane %psr -- PIL<0xf> S<0x1> PS<0x1> CWP<0x0> */
set (PSR_PIL | PSR_S | PSR_PS), %g1
wr %g1, 0x0, %psr ! traps off though
WRITE_PAUSE
/* Our %wim is one behind CWP */
mov 2, %g1
wr %g1, 0x0, %wim
WRITE_PAUSE
/* This identifies "this cpu". */
wr %g3, 0x0, %tbr
WRITE_PAUSE
/* Give ourselves a stack and curptr. */
set current_set, %g5
srl %g3, 10, %g4
and %g4, 0xc, %g4
ld [%g5 + %g4], %g6
sethi %hi(THREAD_SIZE - STACKFRAME_SZ), %sp
or %sp, %lo(THREAD_SIZE - STACKFRAME_SZ), %sp
add %g6, %sp, %sp
/* Turn on traps (PSR_ET). */
rd %psr, %g1
wr %g1, PSR_ET, %psr ! traps on
WRITE_PAUSE
/* Init our caches, etc. */
set poke_srmmu, %g5
ld [%g5], %g5
call %g5
nop
/* Start this processor. */
call smp4m_callin
nop
b,a smp_do_cpu_idle
.text
.align 4
smp_do_cpu_idle:
call cpu_idle
mov 0, %o0
call cpu_panic
nop
__smp4m_processor_id:
rd %tbr, %g2
srl %g2, 12, %g2
and %g2, 3, %g2
retl
mov %g1, %o7
__smp4d_processor_id:
lda [%g0] ASI_M_VIKING_TMP1, %g2
retl
mov %g1, %o7
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
__INIT
.align 4
sun4d_cpu_startup:
/* Set up a sane %psr -- PIL<0xf> S<0x1> PS<0x1> CWP<0x0> */
set (PSR_PIL | PSR_S | PSR_PS), %g1
wr %g1, 0x0, %psr ! traps off though
WRITE_PAUSE
/* Our %wim is one behind CWP */
mov 2, %g1
wr %g1, 0x0, %wim
WRITE_PAUSE
/* Set tbr - we use just one trap table. */
set trapbase, %g1
wr %g1, 0x0, %tbr
WRITE_PAUSE
/* Get our CPU id out of bootbus */
set SUN4D_BOOTBUS_CPUID, %g3
lduba [%g3] ASI_M_CTL, %g3
and %g3, 0xf8, %g3
srl %g3, 3, %g1
sta %g1, [%g0] ASI_M_VIKING_TMP1
/* Give ourselves a stack and curptr. */
set current_set, %g5
srl %g3, 1, %g4
ld [%g5 + %g4], %g6
sethi %hi(THREAD_SIZE - STACKFRAME_SZ), %sp
or %sp, %lo(THREAD_SIZE - STACKFRAME_SZ), %sp
add %g6, %sp, %sp
/* Turn on traps (PSR_ET). */
rd %psr, %g1
wr %g1, PSR_ET, %psr ! traps on
WRITE_PAUSE
/* Init our caches, etc. */
set poke_srmmu, %g5
ld [%g5], %g5
call %g5
nop
/* Start this processor. */
call smp4d_callin
nop
b,a smp_do_cpu_idle