658 lines
16 KiB
C
658 lines
16 KiB
C
/*
|
|
* imx-ssi.c -- ALSA Soc Audio Layer
|
|
*
|
|
* Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
|
|
*
|
|
* This code is based on code copyrighted by Freescale,
|
|
* Liam Girdwood, Javier Martin and probably others.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* The i.MX SSI core has some nasty limitations in AC97 mode. While most
|
|
* sane processor vendors have a FIFO per AC97 slot, the i.MX has only
|
|
* one FIFO which combines all valid receive slots. We cannot even select
|
|
* which slots we want to receive. The WM9712 with which this driver
|
|
* was developed with always sends GPIO status data in slot 12 which
|
|
* we receive in our (PCM-) data stream. The only chance we have is to
|
|
* manually skip this data in the FIQ handler. With sampling rates different
|
|
* from 48000Hz not every frame has valid receive data, so the ratio
|
|
* between pcm data and GPIO status data changes. Our FIQ handler is not
|
|
* able to handle this, hence this driver only works with 48000Hz sampling
|
|
* rate.
|
|
* Reading and writing AC97 registers is another challenge. The core
|
|
* provides us status bits when the read register is updated with *another*
|
|
* value. When we read the same register two times (and the register still
|
|
* contains the same value) these status bits are not set. We work
|
|
* around this by not polling these bits but only wait a fixed delay.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include <linux/platform_data/asoc-imx-ssi.h>
|
|
|
|
#include "imx-ssi.h"
|
|
#include "fsl_utils.h"
|
|
|
|
#define SSI_SACNT_DEFAULT (SSI_SACNT_AC97EN | SSI_SACNT_FV)
|
|
|
|
/*
|
|
* SSI Network Mode or TDM slots configuration.
|
|
* Should only be called when port is inactive (i.e. SSIEN = 0).
|
|
*/
|
|
static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 sccr;
|
|
|
|
sccr = readl(ssi->base + SSI_STCCR);
|
|
sccr &= ~SSI_STCCR_DC_MASK;
|
|
sccr |= SSI_STCCR_DC(slots - 1);
|
|
writel(sccr, ssi->base + SSI_STCCR);
|
|
|
|
sccr = readl(ssi->base + SSI_SRCCR);
|
|
sccr &= ~SSI_STCCR_DC_MASK;
|
|
sccr |= SSI_STCCR_DC(slots - 1);
|
|
writel(sccr, ssi->base + SSI_SRCCR);
|
|
|
|
writel(~tx_mask, ssi->base + SSI_STMSK);
|
|
writel(~rx_mask, ssi->base + SSI_SRMSK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* SSI DAI format configuration.
|
|
* Should only be called when port is inactive (i.e. SSIEN = 0).
|
|
*/
|
|
static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 strcr = 0, scr;
|
|
|
|
scr = readl(ssi->base + SSI_SCR) & ~(SSI_SCR_SYN | SSI_SCR_NET);
|
|
|
|
/* DAI mode */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
/* data on rising edge of bclk, frame low 1clk before data */
|
|
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSI |
|
|
SSI_STCR_TEFS;
|
|
scr |= SSI_SCR_NET;
|
|
if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
|
|
scr &= ~SSI_I2S_MODE_MASK;
|
|
scr |= SSI_SCR_I2S_MODE_SLAVE;
|
|
}
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
/* data on rising edge of bclk, frame high with data */
|
|
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* data on rising edge of bclk, frame high with data */
|
|
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
/* data on rising edge of bclk, frame high 1clk before data */
|
|
strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL |
|
|
SSI_STCR_TEFS;
|
|
break;
|
|
}
|
|
|
|
/* DAI clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
strcr ^= SSI_STCR_TSCKP | SSI_STCR_TFSI;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
strcr ^= SSI_STCR_TSCKP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
strcr ^= SSI_STCR_TFSI;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
}
|
|
|
|
/* DAI clock master masks */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
break;
|
|
default:
|
|
/* Master mode not implemented, needs handling of clocks. */
|
|
return -EINVAL;
|
|
}
|
|
|
|
strcr |= SSI_STCR_TFEN0;
|
|
|
|
if (ssi->flags & IMX_SSI_NET)
|
|
scr |= SSI_SCR_NET;
|
|
if (ssi->flags & IMX_SSI_SYN)
|
|
scr |= SSI_SCR_SYN;
|
|
|
|
writel(strcr, ssi->base + SSI_STCR);
|
|
writel(strcr, ssi->base + SSI_SRCR);
|
|
writel(scr, ssi->base + SSI_SCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* SSI system clock configuration.
|
|
* Should only be called when port is inactive (i.e. SSIEN = 0).
|
|
*/
|
|
static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 scr;
|
|
|
|
scr = readl(ssi->base + SSI_SCR);
|
|
|
|
switch (clk_id) {
|
|
case IMX_SSP_SYS_CLK:
|
|
if (dir == SND_SOC_CLOCK_OUT)
|
|
scr |= SSI_SCR_SYS_CLK_EN;
|
|
else
|
|
scr &= ~SSI_SCR_SYS_CLK_EN;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(scr, ssi->base + SSI_SCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* SSI Clock dividers
|
|
* Should only be called when port is inactive (i.e. SSIEN = 0).
|
|
*/
|
|
static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 stccr, srccr;
|
|
|
|
stccr = readl(ssi->base + SSI_STCCR);
|
|
srccr = readl(ssi->base + SSI_SRCCR);
|
|
|
|
switch (div_id) {
|
|
case IMX_SSI_TX_DIV_2:
|
|
stccr &= ~SSI_STCCR_DIV2;
|
|
stccr |= div;
|
|
break;
|
|
case IMX_SSI_TX_DIV_PSR:
|
|
stccr &= ~SSI_STCCR_PSR;
|
|
stccr |= div;
|
|
break;
|
|
case IMX_SSI_TX_DIV_PM:
|
|
stccr &= ~0xff;
|
|
stccr |= SSI_STCCR_PM(div);
|
|
break;
|
|
case IMX_SSI_RX_DIV_2:
|
|
stccr &= ~SSI_STCCR_DIV2;
|
|
stccr |= div;
|
|
break;
|
|
case IMX_SSI_RX_DIV_PSR:
|
|
stccr &= ~SSI_STCCR_PSR;
|
|
stccr |= div;
|
|
break;
|
|
case IMX_SSI_RX_DIV_PM:
|
|
stccr &= ~0xff;
|
|
stccr |= SSI_STCCR_PM(div);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(stccr, ssi->base + SSI_STCCR);
|
|
writel(srccr, ssi->base + SSI_SRCCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Should only be called when port is inactive (i.e. SSIEN = 0),
|
|
* although can be called multiple times by upper layers.
|
|
*/
|
|
static int imx_ssi_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 reg, sccr;
|
|
|
|
/* Tx/Rx config */
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
reg = SSI_STCCR;
|
|
else
|
|
reg = SSI_SRCCR;
|
|
|
|
if (ssi->flags & IMX_SSI_SYN)
|
|
reg = SSI_STCCR;
|
|
|
|
sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK;
|
|
|
|
/* DAI data (word) size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
sccr |= SSI_SRCCR_WL(16);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
sccr |= SSI_SRCCR_WL(20);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
sccr |= SSI_SRCCR_WL(24);
|
|
break;
|
|
}
|
|
|
|
writel(sccr, ssi->base + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(dai);
|
|
unsigned int sier_bits, sier;
|
|
unsigned int scr;
|
|
|
|
scr = readl(ssi->base + SSI_SCR);
|
|
sier = readl(ssi->base + SSI_SIER);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (ssi->flags & IMX_SSI_DMA)
|
|
sier_bits = SSI_SIER_TDMAE;
|
|
else
|
|
sier_bits = SSI_SIER_TIE | SSI_SIER_TFE0_EN;
|
|
} else {
|
|
if (ssi->flags & IMX_SSI_DMA)
|
|
sier_bits = SSI_SIER_RDMAE;
|
|
else
|
|
sier_bits = SSI_SIER_RIE | SSI_SIER_RFF0_EN;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
scr |= SSI_SCR_TE;
|
|
else
|
|
scr |= SSI_SCR_RE;
|
|
sier |= sier_bits;
|
|
|
|
scr |= SSI_SCR_SSIEN;
|
|
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
scr &= ~SSI_SCR_TE;
|
|
else
|
|
scr &= ~SSI_SCR_RE;
|
|
sier &= ~sier_bits;
|
|
|
|
if (!(scr & (SSI_SCR_TE | SSI_SCR_RE)))
|
|
scr &= ~SSI_SCR_SSIEN;
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(ssi->flags & IMX_SSI_USE_AC97))
|
|
/* rx/tx are always enabled to access ac97 registers */
|
|
writel(scr, ssi->base + SSI_SCR);
|
|
|
|
writel(sier, ssi->base + SSI_SIER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
|
|
.hw_params = imx_ssi_hw_params,
|
|
.set_fmt = imx_ssi_set_dai_fmt,
|
|
.set_clkdiv = imx_ssi_set_dai_clkdiv,
|
|
.set_sysclk = imx_ssi_set_dai_sysclk,
|
|
.set_tdm_slot = imx_ssi_set_dai_tdm_slot,
|
|
.trigger = imx_ssi_trigger,
|
|
};
|
|
|
|
static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
|
|
uint32_t val;
|
|
|
|
snd_soc_dai_set_drvdata(dai, ssi);
|
|
|
|
val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.maxburst) |
|
|
SSI_SFCSR_RFWM0(ssi->dma_params_rx.maxburst);
|
|
writel(val, ssi->base + SSI_SFCSR);
|
|
|
|
/* Tx/Rx config */
|
|
dai->playback_dma_data = &ssi->dma_params_tx;
|
|
dai->capture_dma_data = &ssi->dma_params_rx;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver imx_ssi_dai = {
|
|
.probe = imx_ssi_dai_probe,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_96000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_96000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.ops = &imx_ssi_pcm_dai_ops,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver imx_ac97_dai = {
|
|
.probe = imx_ssi_dai_probe,
|
|
.bus_control = true,
|
|
.playback = {
|
|
.stream_name = "AC97 Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AC97 Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.ops = &imx_ssi_pcm_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver imx_component = {
|
|
.name = DRV_NAME,
|
|
};
|
|
|
|
static void setup_channel_to_ac97(struct imx_ssi *imx_ssi)
|
|
{
|
|
void __iomem *base = imx_ssi->base;
|
|
|
|
writel(0x0, base + SSI_SCR);
|
|
writel(0x0, base + SSI_STCR);
|
|
writel(0x0, base + SSI_SRCR);
|
|
|
|
writel(SSI_SCR_SYN | SSI_SCR_NET, base + SSI_SCR);
|
|
|
|
writel(SSI_SFCSR_RFWM0(8) |
|
|
SSI_SFCSR_TFWM0(8) |
|
|
SSI_SFCSR_RFWM1(8) |
|
|
SSI_SFCSR_TFWM1(8), base + SSI_SFCSR);
|
|
|
|
writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_STCCR);
|
|
writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_SRCCR);
|
|
|
|
writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN, base + SSI_SCR);
|
|
writel(SSI_SOR_WAIT(3), base + SSI_SOR);
|
|
|
|
writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN |
|
|
SSI_SCR_TE | SSI_SCR_RE,
|
|
base + SSI_SCR);
|
|
|
|
writel(SSI_SACNT_DEFAULT, base + SSI_SACNT);
|
|
writel(0xff, base + SSI_SACCDIS);
|
|
writel(0x300, base + SSI_SACCEN);
|
|
}
|
|
|
|
static struct imx_ssi *ac97_ssi;
|
|
|
|
static void imx_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
struct imx_ssi *imx_ssi = ac97_ssi;
|
|
void __iomem *base = imx_ssi->base;
|
|
unsigned int lreg;
|
|
unsigned int lval;
|
|
|
|
if (reg > 0x7f)
|
|
return;
|
|
|
|
pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
|
|
|
|
lreg = reg << 12;
|
|
writel(lreg, base + SSI_SACADD);
|
|
|
|
lval = val << 4;
|
|
writel(lval , base + SSI_SACDAT);
|
|
|
|
writel(SSI_SACNT_DEFAULT | SSI_SACNT_WR, base + SSI_SACNT);
|
|
udelay(100);
|
|
}
|
|
|
|
static unsigned short imx_ssi_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
struct imx_ssi *imx_ssi = ac97_ssi;
|
|
void __iomem *base = imx_ssi->base;
|
|
|
|
unsigned short val = -1;
|
|
unsigned int lreg;
|
|
|
|
lreg = (reg & 0x7f) << 12 ;
|
|
writel(lreg, base + SSI_SACADD);
|
|
writel(SSI_SACNT_DEFAULT | SSI_SACNT_RD, base + SSI_SACNT);
|
|
|
|
udelay(100);
|
|
|
|
val = (readl(base + SSI_SACDAT) >> 4) & 0xffff;
|
|
|
|
pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void imx_ssi_ac97_reset(struct snd_ac97 *ac97)
|
|
{
|
|
struct imx_ssi *imx_ssi = ac97_ssi;
|
|
|
|
if (imx_ssi->ac97_reset)
|
|
imx_ssi->ac97_reset(ac97);
|
|
/* First read sometimes fails, do a dummy read */
|
|
imx_ssi_ac97_read(ac97, 0);
|
|
}
|
|
|
|
static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
struct imx_ssi *imx_ssi = ac97_ssi;
|
|
|
|
if (imx_ssi->ac97_warm_reset)
|
|
imx_ssi->ac97_warm_reset(ac97);
|
|
|
|
/* First read sometimes fails, do a dummy read */
|
|
imx_ssi_ac97_read(ac97, 0);
|
|
}
|
|
|
|
static struct snd_ac97_bus_ops imx_ssi_ac97_ops = {
|
|
.read = imx_ssi_ac97_read,
|
|
.write = imx_ssi_ac97_write,
|
|
.reset = imx_ssi_ac97_reset,
|
|
.warm_reset = imx_ssi_ac97_warm_reset
|
|
};
|
|
|
|
static int imx_ssi_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct imx_ssi *ssi;
|
|
struct imx_ssi_platform_data *pdata = pdev->dev.platform_data;
|
|
int ret = 0;
|
|
struct snd_soc_dai_driver *dai;
|
|
|
|
ssi = devm_kzalloc(&pdev->dev, sizeof(*ssi), GFP_KERNEL);
|
|
if (!ssi)
|
|
return -ENOMEM;
|
|
dev_set_drvdata(&pdev->dev, ssi);
|
|
|
|
if (pdata) {
|
|
ssi->ac97_reset = pdata->ac97_reset;
|
|
ssi->ac97_warm_reset = pdata->ac97_warm_reset;
|
|
ssi->flags = pdata->flags;
|
|
}
|
|
|
|
ssi->irq = platform_get_irq(pdev, 0);
|
|
|
|
ssi->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(ssi->clk)) {
|
|
ret = PTR_ERR(ssi->clk);
|
|
dev_err(&pdev->dev, "Cannot get the clock: %d\n",
|
|
ret);
|
|
goto failed_clk;
|
|
}
|
|
ret = clk_prepare_enable(ssi->clk);
|
|
if (ret)
|
|
goto failed_clk;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ssi->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ssi->base)) {
|
|
ret = PTR_ERR(ssi->base);
|
|
goto failed_register;
|
|
}
|
|
|
|
if (ssi->flags & IMX_SSI_USE_AC97) {
|
|
if (ac97_ssi) {
|
|
dev_err(&pdev->dev, "AC'97 SSI already registered\n");
|
|
ret = -EBUSY;
|
|
goto failed_register;
|
|
}
|
|
ac97_ssi = ssi;
|
|
setup_channel_to_ac97(ssi);
|
|
dai = &imx_ac97_dai;
|
|
} else
|
|
dai = &imx_ssi_dai;
|
|
|
|
writel(0x0, ssi->base + SSI_SIER);
|
|
|
|
ssi->dma_params_rx.addr = res->start + SSI_SRX0;
|
|
ssi->dma_params_tx.addr = res->start + SSI_STX0;
|
|
|
|
ssi->dma_params_tx.maxburst = 6;
|
|
ssi->dma_params_rx.maxburst = 4;
|
|
|
|
ssi->dma_params_tx.filter_data = &ssi->filter_data_tx;
|
|
ssi->dma_params_rx.filter_data = &ssi->filter_data_rx;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx0");
|
|
if (res) {
|
|
imx_pcm_dma_params_init_data(&ssi->filter_data_tx, res->start,
|
|
IMX_DMATYPE_SSI);
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx0");
|
|
if (res) {
|
|
imx_pcm_dma_params_init_data(&ssi->filter_data_rx, res->start,
|
|
IMX_DMATYPE_SSI);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ssi);
|
|
|
|
ret = snd_soc_set_ac97_ops(&imx_ssi_ac97_ops);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to set AC'97 ops: %d\n", ret);
|
|
goto failed_register;
|
|
}
|
|
|
|
ret = snd_soc_register_component(&pdev->dev, &imx_component,
|
|
dai, 1);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "register DAI failed\n");
|
|
goto failed_register;
|
|
}
|
|
|
|
ssi->fiq_params.irq = ssi->irq;
|
|
ssi->fiq_params.base = ssi->base;
|
|
ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx;
|
|
ssi->fiq_params.dma_params_tx = &ssi->dma_params_tx;
|
|
|
|
ssi->fiq_init = imx_pcm_fiq_init(pdev, &ssi->fiq_params);
|
|
ssi->dma_init = imx_pcm_dma_init(pdev, IMX_SSI_DMABUF_SIZE);
|
|
|
|
if (ssi->fiq_init && ssi->dma_init) {
|
|
ret = ssi->fiq_init;
|
|
goto failed_pcm;
|
|
}
|
|
|
|
return 0;
|
|
|
|
failed_pcm:
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
failed_register:
|
|
clk_disable_unprepare(ssi->clk);
|
|
failed_clk:
|
|
snd_soc_set_ac97_ops(NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx_ssi_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_ssi *ssi = platform_get_drvdata(pdev);
|
|
|
|
if (!ssi->fiq_init)
|
|
imx_pcm_fiq_exit(pdev);
|
|
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
|
|
if (ssi->flags & IMX_SSI_USE_AC97)
|
|
ac97_ssi = NULL;
|
|
|
|
clk_disable_unprepare(ssi->clk);
|
|
snd_soc_set_ac97_ops(NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver imx_ssi_driver = {
|
|
.probe = imx_ssi_probe,
|
|
.remove = imx_ssi_remove,
|
|
|
|
.driver = {
|
|
.name = "imx-ssi",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(imx_ssi_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Sascha Hauer, <s.hauer@pengutronix.de>");
|
|
MODULE_DESCRIPTION("i.MX I2S/ac97 SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx-ssi");
|