linux/arch/arm/mach-davinci/board-tnetv107x-evm.c

175 lines
4.1 KiB
C

/*
* Texas Instruments TNETV107X EVM Board Support
*
* Copyright (C) 2010 Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/ratelimit.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
#include <mach/edma.h>
#include <mach/mux.h>
#include <mach/cp_intc.h>
#include <mach/tnetv107x.h>
#define EVM_MMC_WP_GPIO 21
#define EVM_MMC_CD_GPIO 24
static int initialize_gpio(int gpio, char *desc)
{
int ret;
ret = gpio_request(gpio, desc);
if (ret < 0) {
pr_err_ratelimited("cannot open %s gpio\n", desc);
return -ENOSYS;
}
gpio_direction_input(gpio);
return gpio;
}
static int mmc_get_cd(int index)
{
static int gpio;
if (!gpio)
gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
if (gpio < 0)
return gpio;
return gpio_get_value(gpio) ? 0 : 1;
}
static int mmc_get_ro(int index)
{
static int gpio;
if (!gpio)
gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
if (gpio < 0)
return gpio;
return gpio_get_value(gpio) ? 1 : 0;
}
static struct davinci_mmc_config mmc_config = {
.get_cd = mmc_get_cd,
.get_ro = mmc_get_ro,
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_1,
};
static const short sdio1_pins[] __initdata = {
TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1,
TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1,
TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1,
TNETV107X_GPIO21, TNETV107X_GPIO24,
-1
};
static const short uart1_pins[] __initdata = {
TNETV107X_UART1_RD, TNETV107X_UART1_TD,
-1
};
static struct mtd_partition nand_partitions[] = {
/* bootloader (U-Boot, etc) in first 12 sectors */
{
.name = "bootloader",
.offset = 0,
.size = (12*SZ_128K),
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M,
.mask_flags = 0,
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
};
static struct davinci_nand_pdata nand_config = {
.mask_cle = 0x4000,
.mask_ale = 0x2000,
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
.ecc_bits = 1,
};
static struct davinci_uart_config serial_config __initconst = {
.enabled_uarts = BIT(1),
};
static struct tnetv107x_device_info evm_device_info __initconst = {
.serial_config = &serial_config,
.mmc_config[1] = &mmc_config, /* controller 1 */
.nand_config[0] = &nand_config, /* chip select 0 */
};
static __init void tnetv107x_evm_board_init(void)
{
davinci_cfg_reg_list(sdio1_pins);
davinci_cfg_reg_list(uart1_pins);
tnetv107x_devices_init(&evm_device_info);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
static int __init tnetv107x_evm_console_init(void)
{
return add_preferred_console("ttyS", 0, "115200");
}
console_initcall(tnetv107x_evm_console_init);
#endif
MACHINE_START(TNETV107X, "TNETV107X EVM")
.phys_io = TNETV107X_IO_BASE,
.io_pg_offst = (TNETV107X_IO_VIRT >> 18) & 0xfffc,
.boot_params = (TNETV107X_DDR_BASE + 0x100),
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
MACHINE_END